• Korean Management Science Review
• /
• v.26 no.1
• /
• pp.137-159
• /
• 2009

An organizational performance measurement practice is a function of performance measurement system and performance management system they are currently employing, and its quality is determined by evaluating the followings in a comprehensive manner: first, if they are measuring right things; second, if they are measuring in a right way; third, if they are actively facilitating a process of data collection, structuring, analysis, interpretation, and dissemination; and fourth, if they are using performance measurement results for the primary purposes of performance measurement. This study proposes a diagnostic framework for evaluating the performance measurement practices of public broadcasting which include the qualities of performance measurement and performance management, and develop a structured questionnaire for that purpose. The framework proposed in this study does not serve only as a useful tool for public broadcasting to revise their respective performance measures and performance measurement systems, but it also make their respective performance measurement practices a strategic management tool as well as an operational management one.

• Explosives and Blasting
• /
• v.10 no.3
• /
• pp.8-25
• /
• 1992

On the Sub- way Construction It is important to Survey in advance the Geological Structure and also to make the Engineering Geological map this paper deseribs the feature of Geological structure of Seoul Area and analyses the recently occured Rock falling acciudents. NATM Tunnelling always must be done with careful observation and measurement of the geological condition.

• Journal of Korean Society for Atmospheric Environment
• /
• v.3 no.2
• /
• pp.53-61
• /
• 1987

Automatic and manual rain smaplers wre installed at the roof of National Institute of Environmental Research (NIER), and the rain sampling and measurement were conducted during the period April to August 31, 1987. The rain sampling and measurement were carried out in the following manners: The 1st : Acidity and conductivity were measured entirely by automatic rain sampler (continuous measurement) The 2nd : Acidity and conductivity wrer measured in the laboratory with the sample that was taken out of automatic rain sampler. The 3rd : Acidity and conductivity were measured in the laboratory with the sample that was taken out of manual rain sampler. Afterwards, those different measurement values were compared each other and the following conclusions were obtained: 1) The pH of the continous measurement by the automatic sampler was lower than that of the laboratory measurement, and it was reversed in case of the conductivity. 2) The significance was recognized at 5% risk ratio for the population mean of difference of the measurement values of the pH and conductivity from both samples. 3) The significance was not recognized at 5% risk ratio by the analysis of variance by one way layout for the pH and conductivity. 4) The significance was recognized at 5% risk ratio by the analysis of variance by two way layouts for the pH conductivity. 5) The significance was recognized at 5% rrisk ratio for the differences of the pH values obtained by oboth samplers, and no significance was recognized for conductivity. 6) In comparison of the measurement values from the two samplers were shown a good correlation for pH; correlation coefficient (r) = 0.63, and regression equation Y = 0.53X + 2.78. For conductivity, the correlation was also excellent; correlation coefficient (r) = 0.53 and regression equation Y = 0.63X + 5.65.

• Journal of Information Technology Services
• /
• v.10 no.4
• /
• pp.229-242
• /
• 2011

It is necessary to have measurement and analysis activity for managing software project. At least, every project measures time and cost in order to figure it out whether it will finish within its deadline. CMMI has Measurement and Analysis process in Maturity Level 2. In Measurement and Analysis process, Indicators for decision making in project management are defined and analysis procedure of the measurements to get the indicators are specified. Also, the way of collecting the data and storing them is also planned. Establishing efficient and effective measurement and analysis process in the organization by improving existing process is very important for project success. In this paper, we provide a method for analyzing the measurement and analysis process and improving it based on IDEAL model. It will support the organizations which are trying to adopt CMMI to establish measurement and analysis process.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.114-118
• /
• 2021

In this research, the dimensional error of the measured specimen according to the measurement method was analyzed for the length, angle, radius of curvature and diameter using a projector which is used in industry. One-way analysis was performed on each data tested 30 times using a statistical technique. Through the experiment, it was found that an error occurred in each data when measuring the length and radius of curvature according to the measurement method, and the null hypothesis that no error occurred when measuring the angle and length was established. Based on this experimental data, the automatic measurement when measuring the projector causes less measurement error, so automatic measurement is recommended when measuring a small product. Also, an optimal measuring method is suggested for securing reliability on formulations of measurement automation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.6
• /
• pp.977-993
• /
• 2017

In this study, we develop a scale to measure brand image attributes related to the symbolic use of fashion brands, and then, test the validity and reliability of the scale. In Study 1, a comprehensive literature review was conducted to generate the initial set of measurement items. Nominal Group Technique was subsequently conducted to refine the measurement items in a qualitative way. In Study 2, an expert survey was performed to further refine the measurement items in a quantitative way. In Study 3, a consumer survey was performed to determine the final set of measurement items and validate it. The scale of brand attribute symbolism consists of 21 items with six factors (i.e., Strength, Intellect, Cheerfulness, Traditional Femininity, Nature, and Affordability). The six-factor, 21-item scale is found valid and reliable. Implications, limitations of this study, and suggestions for future research are also discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.193-197
• /
• 2015

Recently, the new issues for the safety and the information delivery system in the ship are raised. The deployment and the efficient algorithms of deploying the wireless sensor networks instead of using the built-in wired networks or the setup of the new wired networks is more desirable than the deployment of the wired networks in a ship after its final production since it can reduce the cost and the time of the brand new wired networks by reshaping some of the internal structure of the ship. In this paper, the shipboard signal propagation measurement system based on the signature sequence-three way slave mode are designed and its measureed data are analysed after measuring the signal propagation characteristics. Consequently, it is expected that the reliable and cost-effective signal measurement system with the three way algorithm for the deployment of the shipboard wireless networks can be achieved.

• Proceedings of the KWS Conference
• /
• 1993.05a
• /
• pp.132-134
• /
• 1993

The conventional way of molten nugget size measurement in welding process have utilized the metal-microscope by examining the micro sectioned weld specimen after micro-etching procedure. This paper proposes a new method for exact measurement of molten nugget size with the aid of the digital image processing unit and some developed software. This method proved to be convenient and precise in that resulting resolution and accuracy are as good as that of the conventional method.

• IE interfaces
• /
• v.11 no.3
• /
• pp.41-53
• /
• 1998

Several performance measurement systems have been proposed and are currently being used in many organizations. However, no performance measurement system has presented a mechanism for integrating all of the information of performance measures in a way that considers the relationships between them. This paper proposes the performance information integration method (PIIM) which synthesizes all useful information of performance measures with consideration of the relationships and generates a single, global, organizational performance score. The PIIM showed good performance in the implementation in one long-term care facility. This paper provides performance measurement systems with an integration mechanism for multiple performance measures.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.3
• /
• pp.27-32
• /
• 2010

The OMM(On-Machine-Measurement) system has many advantages compare to conventional measurement in the way the time and cost. But, the sensor suitable to OMM system is restrictive use. Touch trigger probe sensor has long time for measurement and non-contact sensor has directional demerit. Because the long mechanical parts such as gear and lead screw for pump, injector and machine tools has big and heavy, unclamp and transferring for measurement in machining process is very difficult. This paper presents a development of ultra miniature eddy current displacement sensor with 3 axes for On-Machine-Measurement system. The accuracy of the sensor is experimentally proved in the grinding machine. In experimental results, the accuracy has under ${\pm}5\;{\mu}m$.