• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.199-201
• /
• 2013

골프존과 같이 스포츠가 가지는 활동성과 게임의 흥미요소를 결합한 '스포테인먼트'는 시간과 지리적 제약이 비교적 작다는 점에서 앞으로 새로운 비즈니스 아이템으로 많은 발전가능성을 가지고 있다고 볼 수 있다. 본 연구에서는 센서 기술을 활용하여 야구 시뮬레이션 게임 개발을 목표로 1차적으로 투구분석과 타자의 스윙분석을 할 수 있는 시스템 개발을 위한 설계를 제안하고자 한다. 주요 기능으로는 스피드건을 통한 구속의 측정이 아닌 센서의 작동 시간을 통해 구속을 측정하고 투구의 궤적을 추적하는 기능을 그래픽으로 재구현하고, 이와 유사한 방법을 통해서 타자의 스윙 및 타구의 추적 기능을 제안하고자 한다. 이 야구시뮬레이션 게임은 성공적인 비즈니스 아이템으로 성장한 골프존과 같이 스포츠와 게임을 결합한 "실내 스포테인먼트"의 하나로 발전할 것으로 예상된다.

• 대한기계학회논문집B
• /
• 제23권7호
• /
• pp.937-944
• /
• 1999

The near-wall flow structures of turbulent boundary layer over riblets having semi-circular grooves were investigated experimentally for the drag decreasing ($s^+=25.2$) and drag increasing ($s^+=40.6$) cases. The field of view used for tho velocity field measurement was $6.75{\times}6.75mm^2$ in physical dimension, containing two grooves. One thousand instantaneous velocity fields over the riblets were extracted for each case of drag increase and decrease. For comparison, five hundreds instantaneous velocity fields over a smooth flat plate were also obtained under the same flow conditions. To see the global flow structure qualitatively, the flow visualization was also performed using the synchronized smoke-wire technique. For the drag decreasing case ($s^+=25.2$), most of the streamwise vortices stay above the riblets, interacting with the riblet tips. The high-speed in-rush flow toward the riblet surface rarely influences the flow inside tho riblet valleys submerged in the viscous sublayer. The riblet tips seem to impede the spanwise movement of the longitudinal vortices and induce secondary vortices. The turbulent kinetic energy in the riblet valley is sufficiently small to compensate the increased wetted area of the riblets. In addition, in the logarithmic region, the turbulent kinetic energy are small or almost equal to that of a smooth flat plato. For the drag increasing case ($s^+=40.6$), however, the streamwise vortices move into the riblet valley freely, interacting directly with the riblet inner surface. The penetration of the high-speed in-rush flow on the riblets increases tho skin-friction. The turbulent kinetic energy is increased in the riblet valleys and even in the outer region compared to that over a flat plate.

• Perspectives in Nursing Science
• /
• 제12권2호
• /
• pp.115-123
• /
• 2015

Purpose: This study aimed to investigate the quality of patient-centered nursing care (PCNC) among women with breast cancer at a cancer center in Seoul, Korea. Methods: In a cross-sectional survey design, 223 women with breast cancer were recruited from the oncology surgery unit. The Korean version of the oncology patients' perceptions of the quality of nursing care scale, which is conceptualized in four sub-dimensions (individualization, proficiency, responsiveness, and coordination) was used for measurement. Data were analyzed using descriptive statistics and ANOVA. Results: The participants were all women, with a mean age of 51.3 years. The mean score of PCNC was high and significantly different from each other according to age group. Breast cancer women, who had mastectomy, were satisfied highly in terms of proficiency and responsiveness care, but less satisfied with individualization and coordination care than those of other women. Conclusion: The findings of this study show the quality of cancer nursing care, especially focusing on patient-centeredness, can be measured from the patients'perspective. The individualized and coordinated nursing care is considered to be the core of quality cancer care implying patient-centeredness. Based on the findings of this study, more research is necessary to explore the patients' view of quality cancer care and to test the effects of PCNC within the context of comparative effectiveness.

• 한국정보시스템학회지:정보시스템연구
• /
• 제17권3호
• /
• pp.205-233
• /
• 2008

This study suggests the dynamic value chain model, that will be able to not only show changing processes to organization's significant capital by integrating an individual, implicit, and explicit knowledge which affect organizational decision making, but also distinguish the key driver for raising organizational competitive power because it makes possible to analyze sensitivity of performance along with decision making alternatives and policy changes from dynamic view by connecting knowledge management capability, knowledge management activity, and relations with organizational performance with specific strategic map. Recently, a lot of organizations show interest in measuring and evaluating their performance synthetically. In organizations taking knowledge management, they introduce effective value chain model like a dynamic balanced scorecard (DBSC), and therefore they can reflect their knowledge management condition as well as show their changes by checking performance of established vision and strategy periodically. Furthermore, they can ask for their inner members' understanding and participation by communicating with and inspiring their members with awareness that members are one of their group, present a base of benchmarking, and offer significant information for later decision making. The BSC has been a successful framework for measuring an organization's performance in various perspectives through translating an organization's vision and strategy into an interrelated set of key performance indicators and specific actions. The BSC, while having significant strengths over traditional performance measurement methods, however, has its own limitations, due to its static nature, such as overlooking two-way causation between performance indicators and neglecting the impact of delayed feedback flowing from the adoption of new strategies or policy changes. To overcome these limitations, this study employs SD, a methodology for understanding complex systems where dynamic feedback among the interrelated system components significantly impact on the system outcomes. The SD simulation model in the form of DBSC would serve as a useful strategic teaming tool for facilitating an organization's communication process through various scenario analyses as well as predicting the dynamic behavior pattern of their key performance measures over a future time frame. For the demonstration purpose, this study applied the DBSC model to Prototype of Korea manufacturing and service firm.

• Imaging Science in Dentistry
• /
• 제48권1호
• /
• pp.21-30
• /
• 2018

Purpose: To calculate the effective doses of cone-beam computed tomography (CBCT) using personal computer-based Monte Carlo (PCXMC) software (Radiation and Nuclear Safety Authority, Helsinki, Finland) and to compare the calculated effective doses with those measured using thermoluminescent dosimeters (TLDs) and an anthropomorphic phantom. Materials and Methods: An Alphard VEGA CBCT scanner (Asahi Roentgen Ind. Co., Kyoto, Japan) with multiple fields of view (FOVs) was used for this study. The effective doses of the scout and main projections of CBCT using 1 large and 2 medium FOVs with a height >10 cm were calculated using PCXMC and PCXMCRotation software and then were compared with the doses obtained using TLD-100 LiF and an anthropomorphic adult human male phantom. Furthermore, it was described how to determine the reference points on the Y- and Z-axes in PCXMC, the important dose-determining factors in this software. Results: The effective doses at CBCT for 1 large ($20.0cm{\times}17.9cm$) and 2 medium FOVs ($15.4cm{\times}15.4cm$ and $10.2cm{\times}10.2cm$) calculated by the PCXMC software were 181, 300, and $158{\mu}Sv$, respectively. These values were comparable (16%-18% smaller) to those obtained through TLD measurements in each mode. Conclusion: The use of PCXMC software could be an alternative to the TLD measurement method for effective dose estimation in CBCT with large and medium FOVs.

• 건축역사연구
• /
• 제17권5호
• /
• pp.23-37
• /
• 2008

Hyeunryungwon is a tomb for Crown Prince Sado, who was the father of King Jeongjo, the twenty second king of Joseon dynasty. The tomb had been originally in the Eastern part of Seoul, but was relocated in 1789 to the downtown Suwon, which was renowned as a good tomb site among the Royal family at that time. King Jeongjo looked through the records from the previous generations for the ideal location and direction for the tomb. He personally studied Feng Shui theory and designated its location and direction. He ordered for lavish decorations for the stone adornments of the surroundings of the grave mound, which was against the regulations of the royal family. He found his reasons in the precedent that allowed sumptuous decoration. However, for the arrangements of Jeongjagahk(T shaped building) and other attached facilities, he made unusual choice that other precedent royal tombs did not have. Instead of following the conventions that Jeongjagak should be facing south of a grave mound, he put it on the right side of grave mound. Also conventionally, Subokbang(a place where guards can stay) and Suragan(a kitchen that prepares food for sacrificial rites) should be facing symmetrically, but they too, were on the same side with Jeongjagak. It was a measurement that the grave mound of Hyeunryungwon can have a full view without being obstructed by other facilities and it was also personally ordered by King Jeongjo. The distinguishing features of Hyeunryuwon was motivated by King Jeongjo's filial affection, and his academic pursuit of precedent royal tombs initiated the unconventional and innovative challenges.

• 디지털콘텐츠학회 논문지
• /
• 제15권1호
• /
• pp.45-52
• /
• 2014

모든 의료정보시스템에는 이해관계자와 환경이 존재한다. 의료정보시스템 개발 시에는 이 같은 환경에서 사용자의 기능적 요구사항과 비기능적 요구사항인 품질을 만족시켜야할 목표가 있다. 이 목표를 달성하기 위하여 현재 다양한 방법으로 정보시스템 개발이 이루어지고 있고 다양한 애플리케이션이 등장하고 있다. 그러나 이 같은 의료정보시스템 개발의 과정에서 기본적인 요구조건을 만족하고 있는지는 별도의 관점에서 고찰하지 않으면 안 된다. 본 연구는 유-헬스케어 서비스 소프트웨어아키텍쳐 품질확보를 위한 요구사항 분석방법을 제안한다. 의료정보시스템의 요구사항 분석을 통해 소프트웨어아키텍처 품질평가 사항과 의료정보서비스 품질평가 연계지표 평가방식을 제안했다. 이 방법은 연계성 팩터의 품질 합계치를 산출하고 그 추이를 분석하므로서 유-헬스케어 소프트웨어아키텍쳐에 대한 종합평가가 가능하게 한다. 품질평가는 요구사항 분석에서 도출된 목표와 비교하여 달성도를 분석하며 만족도 수준이 미진한 분야를 발췌하여 원인분석 및 개선작업에 활용이 가능하다.

• Corrosion Science and Technology
• /
• 제2권6호
• /
• pp.289-295
• /
• 2003

The corrosion behavior of Cr-N coated steels with different phases (${\alpha}-Cr$, CrN and $Cr_2N$) deposited by cathodic arc deposition on Hl3 steel was investigated in 3.5% NaCl solution at ambient temperature. Potentiodynamic polarization test, electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM) were the techniques applied to characterize the corrosion behavior. It was found that the CrN coating had a lower current density from potentiodynamic polarization test than others. The porosity, corresponding to the ratio of the polarization resistance of the uncoated and the coated substrate, was higher in the $Cr_2N$ coating than in the other Cr-N coated steels. EIS measurements showed, for the most of Cr-N coated steels, that the Bode plot presented two time constants. Also, the $Cr_2N$ coating represents the characteristic of Warburg behavior after 72hr of immersion. The coating morphologies were examined in planar view and cross-section by SEM analyses and the results were compared with those of the electrochemical measurement. The CrN coating had a dense, columnar grain-sized microstructure with minor intergranular porosity. From the above results, the CrN coating provided a better corrosion protection than the other Cr-N coated steels.

• Corrosion Science and Technology
• /
• 제9권6호
• /
• pp.310-316
• /
• 2010

Recently a fuel oil of the diesel engine of the marine ship is being changed with heavy oil of low quality as the oil price is higher more and more. Therefore the wear and corrosion in all parts of the engine such as cylinder liner, piston crown, spindle and seat ring of exhaust valves are predominantly increased. In particular the degree of wear and corrosion of piston crown is more seriously compared to the other parts of the engine due to operating in severe environment such as the high temperature of exhaust gas and repeating impact. Thus the repair weldment of the piston crown is a unique method to prolong the its life in a economical point of view. In this case, filler metals having a high corrosion and wear resistance such as stellite 6, Inconel 625 and Inconel 718 are mainly being used for repair welding. However it has been often happened that piston crown on the ship,s job site is being actually inevitably welded with mild filler metals. Therefore in this study, filler metals such as E4301, E4313 and E4316 were welded at SS401 steel as the base metal, and corrosion property of their weld metals in the case of post weld heat treatment or not was investigated with some electrochemical methods such as measurement of corrosion potential, cathodic and anodic polarization curves, cyclic voltammogram and polarization resistance etc. in 0.1% $H_2SO_4$ solution. Corrosion resistance of the weld metal of E4301 was better than the other weld metals in the case of no heat treatment, however, its resistance was considerably decreased with post weld heat treatment(annealing:$625^{\circ}C$, 2 hr) compared to other weld metals. The weld metals of E4313 and E4316 showed a relatively good corrosion resistance by post weld heat treatment.

• 천문학논총
• /
• 제30권2호
• /
• pp.119-120
• /
• 2015

We report results of the measurement of the trigonometric parallax of an $H_2O$ maser source in IRAS 22555+6213 with the VLBI Exploration of Radio Astrometry (VERA). The annual parallax was determined to be $0.278{\pm}0.019$ mas, corresponding to a distance of $3.66^{+0.30}_{-0.26}kpc$. Our results confirm that IRAS 22555+6213 is located in the Perseus arm. We computed the peculiar motion of IRAS 22555+6213 to be ($U_{src}$, $V_{src}$, $W_{src}$) = ($0{\pm}1$, $-32{\pm}1$, $9{\pm}1$) $km\;s^{-1}$, where $U_{src}$, $V_{src}$, and $W_{src}$ are directed toward the Galactic center, in the direction of Galactic rotation and toward the Galactic north pole, respectively. IRAS 22555+6213, NGC7538 and Cepheus A lie along the same line of sight, and are within $2^{\circ}$ on the sky. Their parallax distances, with which we derived their absolute position in the Milky Way, show that IRAS 22555+6213 and NGC7538 are associated with the Perseus arm, while Cepheus A is located in the Local arm. We compared the kinematic distances of IRAS 22555+6213 derived with flat and non-flat rotation curve with its parallax distance and found the kinematic distance derived from the non-flat rotation assumption ($-32km\;s^{-1}$ lag) to be consistent with the parallax distance.