• 한국건설순환자원학회논문집
• /
• 제11권4호
• /
• pp.355-363
• /
• 2023

노후 교량의 안전성을 평가하는 방법에 있어서 동특성과 처짐은 구조계의 강성과 직접 연관이 있으며, 처짐의 경우에는 교량 사용자가 직접 감지할 수 있는 물리량으로 가장 중요한 인자이다. 하지만 교량의 처짐을 측정하기 위해서는 교량의 하부에 처짐계를 설치하고 교통 차단 및 재하시험을 실시해야 하는 번거로움이 있어 교량의 환경에 따라서 비용이 증가하거나 측정이 불가능한 문제들이 발생하고 있다. 본 연구에서는 처짐계의 설치 없이 가속도계만을 이용하고 재하시험 없이 상시 진동을 이용하여 교량의 처짐을 측정하는 방법을 제안하였다. 상시 진동을 이용한 교량 동특성 및 처짐 분석을 위해 단순한 연산으로 빠른 분석이 가능하다고 알려진 TDD 기법을 이용하여 교량의 모드형상과 고유진동수를 추출하였으며, 유연도 분석을 통하여 교량의 단위하중 처짐을 분석하여 정적 처짐까지 산정하였다. 본 제안 기술의 검증을 위해 공용중 교량인 C대교(사장교)에 적용하여 모드형상, 고유진동수, 정적 처짐 분석을 수행하였으며 재하시험 실측값과 구조해석 자료와 비교하였다. 그 결과 모드형상 및 고유진동수는 0.42~1.13 %, 중앙경간에서의 최대 처짐은 3.58 %의 오차율을 확인하였다. 따라서 제안기술은 처짐계의 설치가 어려워 실측이 불가능한 교량의 처짐을 추정하여 설계값 및 해석값 대비 처짐 발생량 비교로 교량의 안전성을 간접적으로 파악할 수 있는 근거 자료로 활용 가능할 것으로 사료된다.

• 산업경영시스템학회지
• /
• 제46권4호
• /
• pp.199-208
• /
• 2023

Taguchi method is one of the most popular approaches for design optimization such that performance characteristics become robust to uncontrollable noise variables. However, most previous Taguchi method applications have addressed a single-characteristic problem. Problems with multiple characteristics are more common in practice. The multi-criteria decision making(MCDM) problem is to select the optimal one among multiple alternatives by integrating a number of criteria that may conflict with each other. Representative MCDM methods include TOPSIS(Technique for Order of Preference by Similarity to Ideal Solution), GRA(Grey Relational Analysis), PCA(Principal Component Analysis), fuzzy logic system, and so on. Therefore, numerous approaches have been conducted to deal with the multi-characteristic design problem by combining original Taguchi method and MCDM methods. In the MCDM problem, multiple criteria generally have different measurement units, which means that there may be a large difference in the physical value of the criteria and ultimately makes it difficult to integrate the measurements for the criteria. Therefore, the normalization technique is usually utilized to convert different units of criteria into one identical unit. There are four normalization techniques commonly used in MCDM problems, including vector normalization, linear scale transformation(max-min, max, or sum). However, the normalization techniques have several shortcomings and do not adequately incorporate the practical matters. For example, if certain alternative has maximum value of data for certain criterion, this alternative is considered as the solution in original process. However, if the maximum value of data does not satisfy the required degree of fulfillment of designer or customer, the alternative may not be considered as the solution. To solve this problem, this paper employs the desirability function that has been proposed in our previous research. The desirability function uses upper limit and lower limit in normalization process. The threshold points for establishing upper or lower limits let us know what degree of fulfillment of designer or customer is. This paper proposes a new design optimization technique for multi-characteristic design problem by integrating the Taguchi method and our desirability functions. Finally, the proposed technique is able to obtain the optimal solution that is robust to multi-characteristic performances.

• 한국가스학회지
• /
• 제27권3호
• /
• pp.98-107
• /
• 2023

본 연구에서는 인도네시아 북부 칼리만탄 섬 임의의 광구에서 취득한 석탄시료의 메탄가스 흡착량 측정 실험 결과를 활용하여 석탄층 메탄가스 저류층의 적정 생산정 간격 설계 연구를 수행하였다. 가스 생산성 분석결과, 랭뮤어 부피가 증가할수록 누적 가스생산량도 증가하며 이는 최대 가스 흡착량이 가스생산량에 직접적인 영향을 주는 것으로 판단된다. 또한 탄리투과도가 증가할수록 최대 가스생산량이 증가하고 배출수 기간(dewatering period)이 단축되는 것을 확인하였다. 특히 생산 영향영역이 넓어짐에 따라 누적 가스생산량은 증가하지만 단위 가스정 당 생산성 비교 시, 심도 2,000 ft, 영향영역 80-160 acres 사이에서 최대 누적 가스생산량이 산출되었다. 탄층 심도와 생산 영향영역을 동시에 고려하여 적정 생산정 심도 및 간격 산출 결과, 600-2,000 ft 사이에서 가스 생산성이 가장 높게 나타나며, 이때 생산정 간격은 80-160 acres 범위 내로 설계 하는 것이 적정하다. 따라서 탐사 시추 시 회수된 코어 시료 이외의 시추 자료가 없는 미개발 CBM 저류층에서 석탄시료의 가스흡착 실험 결과를 활용함으로써 탄층심도를 고려한 생산정 간격 설계를 수행할 수 있음을 제시하였다.

• Korean Journal of Radiology
• /
• 제22권5호
• /
• pp.688-698
• /
• 2021

Objective: To compare the lumen parameters measured by the location-adaptive threshold method (LATM), in which the inter- and intra-scan attenuation variabilities of coronary computed tomographic angiography (CCTA) were corrected, and the scan-adaptive threshold method (SATM), in which only the inter-scan variability was corrected, with the reference standard measurement by intravascular ultrasonography (IVUS). Materials and Methods: The Hounsfield unit (HU) values of whole voxels and the centerline in each of the cross-sections of the 22 target coronary artery segments were obtained from 15 patients between March 2009 and June 2010, in addition to the corresponding voxel size. Lumen volume was calculated mathematically as the voxel volume multiplied by the number of voxels with HU within a given range, defined as the lumen for each method, and compared with the IVUS-derived reference standard. Subgroup analysis of the lumen area was performed to investigate the effect of lumen size on the studied methods. Bland-Altman plots were used to evaluate the agreement between the measurements. Results: Lumen volumes measured by SATM was significantly smaller than that measured by IVUS (mean difference, 14.6 mm³; 95% confidence interval [CI], 4.9-24.3 mm³); the lumen volumes measured by LATM and IVUS were not significantly different (mean difference, -0.7 mm³; 95% CI, -9.1-7.7 mm³). The lumen area measured by SATM was significantly smaller than that measured by LATM in the smaller lumen area group (mean of difference, 1.07 mm²; 95% CI, 0.89-1.25 mm²) but not in the larger lumen area group (mean of difference, -0.07 mm²; 95% CI, -0.22-0.08 mm²). In the smaller lumen group, the mean difference was lower in the Bland-Altman plot of IVUS and LATM (0.46 mm²; 95% CI, 0.27-0.65 mm²) than in that of IVUS and SATM (1.53 mm²; 95% CI, 1.27-1.79 mm²). Conclusion: SATM underestimated the lumen parameters for computed lumen segmentation in CCTA, and this may be overcome by using LATM.

• Korean Journal of Radiology
• /
• 제20권1호
• /
• pp.114-125
• /
• 2019

Objective: Segmented cardiac cine magnetic resonance imaging (MRI) is the gold standard for cardiac ventricular volumetric assessment. In patients with difficulty in breath-holding or arrhythmia, this technique may generate images with inadequate quality for diagnosis. Real-time cardiac cine MRI has been developed to address this limitation. We aimed to assess the performance of retrospective electrocardiography-gated real-time cine MRI at 3T for left ventricular (LV) volume and mass measurement. Materials and Methods: Fifty-one patients were consecutively enrolled. A series of short-axis cine images covering the entire left ventricle using both segmented and real-time balanced steady-state free precession cardiac cine MRI were obtained. End-diastolic volume (EDV), end-systolic volume (ESV), stroke volume (SV), ejection fraction (EF), and LV mass were measured. The agreement and correlation of the parameters were assessed. Additionally, image quality was evaluated using European CMR Registry (Euro-CMR) score and structure visibility rating. Results: In patients without difficulty in breath-holding or arrhythmia, no significant difference was found in Euro-CMR score between the two techniques (0.3 ± 0.7 vs. 0.3 ± 0.5, p > 0.05). Good agreements and correlations were found between the techniques for measuring EDV, ESV, EF, SV, and LV mass. In patients with difficulty in breath-holding or arrhythmia, segmented cine MRI had a significant higher Euro-CMR score (2.3 ± 1.2 vs. 0.4 ± 0.5, p < 0.001). Conclusion: Real-time cine MRI at 3T allowed the assessment of LV volume with high accuracy and showed a significantly better image quality compared to that of segmented cine MRI in patients with difficulty in breath-holding and arrhythmia.

• Korean Journal of Radiology
• /
• 제1권1호
• /
• pp.25-32
• /
• 2000

Objective: The purpose of our study was to determine the ability of H-1 MR spectroscopy (MRS) to lateralize the lesion in patients with hippocampal sclerosis. Materials and Methods: Twenty healthy volunteers and 25 patients with intractable temporal lobe epilepsy whose MR imaging diagnosis was unilateral hippocampal sclerosis were included. This diagnosis was based on the presence of unilateral atrophy and/or high T2 signal intensity of the hippocampus. Single-voxel H-1 MRS was carried out on a 1.5-T unit using PRESS sequence (TE, 136 msec). Spectra were obtained from hippocampal areas bilaterally with volumes of interest (VOIs) of 6.0 cm³ and 2.25 cm³ in healthy volunteers, and of either 6.0 cm³ (n = 14) or 2.25 cm³ (n = 11) in patients. Metabolite ratios of NAA/Cho and NAA/Cr were calculated from relative peak height measurements. The capability of MRS to lateralize the lesion and to detect bilateral abnormalities was compared with MR imaging diagnosis as a standard of reference. Results: In healthy volunteers, NAA/Cho and NAA/Cr ratios were greater than 0.8 and 1.0, respectively. In patients, the mean values of these ratios were significantly lower on the lesion side than on the contralateral side, and lower than those of healthy volunteers (p < .05). The overall correct lateralization rate of MRS was 72% (18/25); this rate was lower with a VOI of 6.0 cm³ than of 2.25 cm³ (64% versus 82%, p < .05). Bilateral abnormalities on MRS were found in 24% (6/25) of cases. Conclusion: Although its rate of correct lateralization is low, single-voxel H-1 MRS is a useful and promising diagnostic tool in the evaluation of hippocampal sclerosis, particularly for the detection of bilateral abnormalities. To improve the diagnostic accuracy of H-1 MRS, further investigation, including the use of a smaller VOI and measurement of the absolute amount of metabolites, are needed.

• 대한방사선치료학회지
• /
• 제26권2호
• /
• pp.199-206
• /
• 2014

목 적 : 최근 영상유도 방사선치료의 급증에 따라 영상유도장치의 정도관리를 철저히 시행할 필요가 있다. 특히 영상유도 방사선치료는 장치의 정확성을 기본 전제로 하기 때문에 이에 대한 정도관리가 필수적으로 행해져야 한다. 본원에서는 영상유도장치의 정도관리를 기존의 팬텀(Phantom)보다 효율적인 팬텀을 자체 제작하여 정확하고 효율적인 정도관리를 이행하고자 한다. 대상 및 방법 : 영상유도장치의 정도관리 항목으로 매우 중요한 5가지를 설정하고, 그 항목에 대하여 효율적이고 정확한 정도관리가 이루어 질 수 있는 팬텀(AMC G-Box)을 자체 제작하였다. 정도관리 항목은 Iso-center와 영상유도장치의 중심 일치성, 구현된 영상의 실측 정확성, 4 방향의 중심일치성, 영상유도 이동의 정확성 및 CBCT(Cone Beam CT)에서 구현된 HU(Hounsfield Unit)의 재현성으로 설정하였다. 이 항목에 대하여 $10cm{\time}10cm{\time}10cm$의 정사각형 팬텀을 1 cm두께의 아크릴로 제작하였으며 CBCT HU을 측정하기 위해 팬텀안에 각각 밀도가 다른 3개의 물질을 삽입하였다. 팬텀에는 중심과 일정한 위치를 가리키는 표식을 만들어서 중심과 일치성 검사를 할 수 있도록 하였다. 실험은 기존 각각의 팬텀을 이용한 정도관리를 실시하고, 새로 제작된 AMC G-Box로 실시한 후 그 결과 값을 비교하고 소요되는 시간과 문제점을 분석하였다. 사용된 치료기는 Varian사의 4개의 모델이고, 1주 간격으로 2회 측정하였다. 결 과 : 완성된 AMC G-Box를 이용한 영상유도장치의 정도관리를 시행하였을 때, 기존 개별로 구성된 팬텀을 이용한 정도관리 결과를 보았을 때, $0.2mm{\pm}0.1$이내에서 결과 값이 같았다. 또한 기존의 방법일 경우 최소 30분에서 45분이 소요되었으나, AMC G-Box를 이용하였을 때는 15분~20분이 소요되어 50%이상 시간을 감소하였다. 결 론 : 영상유도장치는 사용기간이 지남에 따라 일치성과 정확성이 떨어지는 경향이 있다. 따라서 관련된 정도관리를 주기적으로 철저하게 할 필요성이 있다. 특히 일치성 검사는 매일 점검해야하는 항목이다. 이러한 정도관리를 AMC G-Box를 이용할 경우 정확한 정도관리를 효율적으로 실시함으로써, 장치와 환자 치료의 안정성과 정확성을 높일 수 있었다.

• 한국환경생태학회지
• /
• 제26권5호
• /
• pp.730-740
• /
• 2012

본 연구는 도로건설이 송이생산지에 미치는 영향을 최소화하기 위해 강원도 양양군내 신설 예정인 고속도로 건설지 주변의 송이생산 소나무군락의 식생구조를 분석하여 보전 및 복원의 기초자료로 활용하고자 하였다. 고속도로 건설예정지의 영향권과 송이생산량을 고려하여 도로 주변에 총 20개 조사구를 설정하여 Classification기법중의 하나인 TWINSPAN을 이용하여 군락을 분리한 결과, 소나무군락(군락 I, II), 소나무-굴참나무군락(군락 III), 소나무-낙엽활엽수군락(군락 IV)의 4개 군락으로 최종 분리되었다. 군락별 종다양도는 $1.7353{\pm}0.0341{\sim}1.9079{\pm}0.2471$의 범위이었으며 종수는 평균 $9.2{\pm}2.8$, 교목층 출현 평균개체수는 $9.6{\pm}5.0$개체이었다. 식생밀도는 $100m^2$당 4~29주(평균 9.55주), 평균상대공간지수는 35%이하이었으며 평균수령은 $38{\pm}8.34$년생이었으며 토양은 $A_0$층의 깊이가 4~6cm, 토양산도는 4.70~5.63(평균 5.29) 송이 생육에 적정한 수준이었다. 송이는 소나무와 공생의 관계로 소나무군락의 식생구조와 매우 밀접한 관계를 가지고 있으므로 생태적 관리방안으로 적정밀도 조절, 아교목층과 관목층의 밀도조절, 교목층 낙엽활엽수의 제거 등을 제안하였다. 향후 도로건설시 송이생산지역내 관통도로를 최소화하고 송이생산지내 및 인근지역을 관통할 경우 숲내부 천이 및 식생구조 변화가 발생하지 않도록 생태적 관리 및 복원조치가 필요할 것이다.

• 대한방사선치료학회지
• /
• 제22권2호
• /
• pp.105-111
• /
• 2010

목 적: 세기변조방사선치료(intensity modulated radiation therapy; IMRT) 계획에는 여러 가지 beam parameter가 적용되어 치료계획을 수립하게 된다. 본 연구에서는 세기변조방사선치료 계획 시 선량율(dose rate) 변화가 이하선 선량에 미치는 영향을 알아보고자 한다. 대상 및 방법: 두경부암 환자 중 비인강암(nasopharyngeal carcinoma, NPC) 세기변조방사선치료를 시행한 10명의 환자를 대상으로 하였다. 동일한 조건하에 환자의 CT영상을 3 mm 두께로 획득하고 치료계획시스템은 Eclipse (Ver 7.1, Varian, Palo Alto, USA)를 사용하였다. 치료계획은 6 MV 에너지, 8개의 조사면, 그리고 동일한 dose volume constraint를 적용하였고, 선량율을 300, 400, 500 MU/min으로 각각 다르게 적용하였다. 수립된 세 개의 치료계획을 통해 이하선 mean dose를 산출하여 10명의 환자 평균치로 분석하였고, 2D diode array (MapCheck from Sun Nuclear Corporation, Melbourne, Florida)를 사용하여 이하선 부위의 선량을 검증하였다. 그리고 총 Monitor Unit (MU)과 조사시간을 비교하였다. 결 과: 선량율 변화에 따른 이하선 mean dose는 선량율을 300 MU/min에서 400, 500 MU/min 변화 시켰을 때 평균 0.8, 2.0% 증가하였고, 총 MU 또한 평균 5.4, 10.6% 증가하였다. 2D diode Array를 사용한 이하선 부위의 선량측정에서도 증가 추세가 나타났으며 총 조사시간의 차이는 1-2분 정도로 선량율에 따라 큰 변화가 없었다. 결 론: 본 연구결과 선량율이 증가하면 총 MU가 현저히 늘어났고 그에 따라 이하선 선량도 증가하는 유의한 상관관계를 보였으나, 치료시간 단축효과는 크지 않았다. 그러므로 세기변조방사선치료 계획 시 적절한 선량율을 적용하여 이하선 선량을 줄인다면 방사선치료로 인한 이하선의 후기 부작용(late side effect)을 줄일 수 있을 것으로 사료된다.

• 한국문헌정보학회지
• /
• 제16권
• /
• pp.281-327
• /
• 1989

This dissertation is presented in two major parts. The first part presented in Chapter 3 attempts to verify the major hypothesis of the present study that the research and development laboratories(hereafter referred to R&D laboratories), establishd withine industrial firms to develop new technologies needed for their own industrial activities, may have another but very important functions to bring information on the externally generated technologies to attention of their respective management decision makers, eventually resulting in the transfer of technology; and such information functions of the R&D laboratories may be better performed by well-organised laboratories than by poorly-organised ones. The second part presented in Chapters 4, 5, 6 and 7 discusses, after the preceding hypotheses has been verified, some desirable situations of the R&D laboratories in facilitating the flow of information on new technologies developed in the world into their industrial firms, centering on the organisational positions and the major fields of interest of the person in charge of the R&D centers, services of the library and technological information office supporting the R&D laboratories, and frequencies of direct contacts of research and development workers with experts in the world and of participation in various conferences, seminars, workshops, exhibitions, etc. Now that there is no recognised instrument and method available for direct measurement of volume of technological information transfered into a particular industrial firm, the number of technologies introduced into a given firm is employed in the present study as an analogous parametre indicating volume of technological information transfered into the firm during a particular period of time. A logical attempt to justify the use of the indirect paramentre is made in Chapter two. vidences needed to verify the hypotheses of the present study are collected through the various publications of the Korea Industrial Research Institutes and other agencies and institutions related to industrial research activities, and through responses to the questionnaire posted to a sample of the 66 R&D laboratories on 6 May 1987 and returned by 30 August of the same year. Some findings and conclusions made in the study are summarised as follows: (1) More information on externally developed technologies flows into the industrial firm with a R&D laboratory of its own than into the industrial firm without one, and naturally, more chances of transfer of technologies are given to the former than to the latter (see 3. 2) (2) After establishing an R&D laboratory, more technological information flows into the industrial firm than before establishing one (see 3. 3) (3) More technological information flows into the industrial firm with a well-organised R&D laboraory than into the firm with a poorly-organised one (see 3. 4) (4) More technological information flows into the ndustrial firm where the director of its R&D laboratory has status qualified to participate in the highest managerial decision making processes of the firm than into the industrial firm where the director does not have such status (see 4. 2) (5) More technological information flows into the industrial firm where the director of R&D laboratory does not hold other positions within the firm than into the industrial firm where the director holds other positions (see 4.3) (6) There is evidence showing that quantities of technological information transfered into industriali firms vary with the case that the major background of the director of the R&D laboratory is the same as the main field of R&D activities of his or her laboratery, the case that the director's background is partly related to the field of R&D activities of the laboratory, and the case that the director's major background is different from the field of R&D activities of the laboratory (see 4.4) (7) More technological information flows into the industrial firm with the director of its R&D laboratory appointed from among professional research and development workers than into the industrial firm with the director of its R&D laboratory appointed from among general managers (see 4.5) (8) More technological information flows into the industrial firm with its R&D laboratory which has established a library service unit within its own jurisdiction than into the industrial firm with its R&D laboratory which has established a library service unit within its own jurisdiction than into the industrial firm with its R&D laboratory which uses a library within the firm but outside the laboratory (see 5. 1) (9) More echnological information flows into the industrial firm with a technological information office of its own than into the industrial firm without such an office (see 5. 2) (10) More technological information flows into the industrial firm with a large research and development staff in its R&D laboratory than into the industrial firm with a small staff in its R&D laboratory (see 5. 2) (11) More technological information flows into the industrial firm with its R&D laboratory whose staff members more frequently contact experts in the conferences, seminars, symposiums, and workshops held in foreign countries and novelties in the world's major exhibitions than into the industrial firm with its R&D laboratory whose staff members less frequently contact such experts and novelties (see 6. 2 ; 6. 3)