• 한국환경과학회지
• /
• 제22권2호
• /
• pp.251-257
• /
• 2013

Discharge data examine the process of hydrologic cycle and used significantly in water resource planning and irrigation and flood control planning. It makes high quality discharge data, they carry out research on standard and method of discharge measurement, and equipment improvement. Now various flow meters are utilized to make discharge data in Korea. However, accuracy of equipment and exprerimental research data from measurement are not enough. ADCP(Acoustic Doppler Current Profiler) have been introduced and utilized for flow measurements since the end of 1980's. ADCP flow method is a formal method for flow measurement can easily applyd to relatively large rivers gradually recognized. This equipment can measure the non-contact three-dimensional velocity and water depth data very quickly and efficiently. Also, spatial and temporal resolution of the data is more accurate than any other flow measurement methods which measure flow rate by velocity - area measurement method. In this paper, the velocity is measured using various flow meter and verified the effectiveness by applying from the ADCP in Geum-river. Various flow meters which are med for discharge measurements are VALEPORT002, FLOW TRACKER, PRICE AA and ADCP. The average of five times flow measurement result by ADCP was $10.412m^3/s$, with a standard deviation of 0.68. The repeat test by ADCP and comparison between ADCP and other flow devices to verify the most import factor, flow measurement accuracy. In the result, repeat test of the ADCP showed similar values, flow values were similar to other velocity device results and the average error is 7.7%.

• 한국수자원학회논문집
• /
• 제53권7호
• /
• pp.507-519
• /
• 2020

본 연구에서는 지각운동 모니터링과 지진발생 및 예측에 활용가능한 라돈 측정시스템을 개발하였으며, 라돈 측정시스템의 시범운영 결과와 지진발생 사례를 분석하였다. 첫 번째로, 개발된 라돈 측정시스템은 NB-IoT 라돈 측정기기, 데이터센터, 자료분석 및 자료제공 서버로 구성되며, NB-IoT를 활용하므로 측정된 자료의 원격전송이 가능하기 때문에 이 시스템은 무인 지하수관측소에 설치 및 운영에 매우 적합하다. 두 번째로 개발된 라돈 측정기기를 김포지역 지하수관측소에서 2019년 5월부터 7월까지 시범운영하였다. 측정된 라돈값을 지하수위와 전기전도도 측정자료와 비교하였으며, 본 연구에서 개발한 라돈 측정기기가 상용화하는데 어느 정도 가능성이 있음을 확인하였다. 마지막으로 2019년 11월부터 2020년 2월까지 3개 지진발생 사례와 Test-bed인 포항지역 지하수관측소에 설치된 NB-IoT 라돈 측정기기의 일단위 라돈 측정값, 일단위 지하수위, 일단위 전기전도도의 변동성을 비교·분석하였다. 분석결과, 지진발생이 라돈, 지하수위, 전기전도도와 어느 정도 상관관계가 있음을 확인하였으며, 본 측정자료가 향후 지진모니터링 및 예측에 도움이 되는 기초자료 제공이 가능함을 확인하였다

• 대한교통학회지
• /
• 제28권3호
• /
• pp.119-130
• /
• 2010

교통사고의 재구성 해석은 도로와 사고흔적, 자동차 손상 등 다양한 자료들을 분석함으로서 이루어진다. 대부분의 자료들은 사고 해석에서 변수로 작용하며, 측정으로부터 구해지는 자료들은 조사자와 도구, 주어진 환경 등에 의해 측정 오차가 발생된다. 따라서 사고해석에서는 측정 오차에서 비롯되는 불확실성이 항상 존재한다. 본 연구는 불확실성이 존재할 가능성이 매우 높은 도로 기하구조와 타이어 흔적 등 길이와 마찰계수 등에 대해 반복 측정 실험을 함으로서 교통 사고해석에서의 불확실성을 정량화하였다. 또한 자동차 충돌 변형량의 사진 계측에 대한 불확실성에 대해서도 해석 결과를 제시하였다. 이러한 통계학적 분포들은 사고 재구성 불확실성을 추정하기 위해 입력 계수의 적절한 범위를 결정하는 것을 도울 수 있다.

• 지식경영연구
• /
• 제21권4호
• /
• pp.243-263
• /
• 2020

본 연구는 공공데이터 개방에 있어 공공데이터 제공자의 데이터 기여 측면과 공공데이터 사용자의 데이터 활용 측면을 고려하여 공공데이터 플랫폼 성과측정을 위한 프레임워크를 개발하였다. 본 연구는 NIST(2018)의 빅데이터 참조 아키텍처와 Neely et al.(2001)의 성과 프리즘을 기반으로 공공 빅데이터 플랫폼 성과평가 모형의 5개 영역을 제시하였다. 구체적으로, 공공데이터 플랫폼 성과평가 영역은 이해관계자 기여, 빅데이터 거버넌스 역량, 빅데이터 서비스 역량, 빅데이터 정보기술(IT) 역량, 그리고 이해관계자 만족으로 구성된다. 본 연구에서 제시한 공공 빅데이터 플랫폼 성과평가 모형의 5개 영역과 24개 평가지표에 대한 측정 문항은 총 75개 항목으로 구성되었다.

• 자원환경지질
• /
• 제37권1호
• /
• pp.49-59
• /
• 2004

The concectration and distribution of contaminants obtained from a contaminated land investigation or an environmental geochemistry survey constitutes the basis of a decision-making process on environmental policies or of scientific researches. As the quality of data determines the reliability of the result, the investigation plan should be adjusted according to the purpose of the investigation. In general, the effort to improve the data quality had been focused mainly on the QA/QC procedures in laboratories. The rapid progress of analytical instrument has also contributed toward improving the analytical precision to a sacrificable degree. Nevertheless, in many cases, it is not the analytical precision that needs improvement for the better precision of overall measurement process: it is rather during the sampling process in the field that is responsible for the poor precision. To assess the data quality on a measured value, ISO recommends to provide information on "measurement uncertainty" along with the measured value. The measurement uncertainty in an environmental measurement context can be explained as the statistical number that expresses the degree of the uncertainty stemming from the sampling and analytical procedures. There is a cost involved in order to improve the precision of sampling and analytical methods so as to decrease the degree of measurement uncertainty. The economical point of compromise in an investigation planning can be achieved when the allowable degree of uncertainty has been set before-hand. The investigation can then be planned accordingly not to exceed the uncertainty limit. Furthermore, if the measurement uncertainty estimated from the preliminary investigation can be separated into sampling and analytical uncertainties, it can be used as a criterion where the resources for the investigation should be allotted cost-effectively to reinforce the weakest link of the whole investigation process. This paper aims to present a method of estimating the level of measurement uncertainty of a measured contamination concentration at a site used as an example and to show how the estimated uncertainty can be applied to serve the particular purpose of an investigation.

• Journal of Astronomy and Space Sciences
• /
• 제32권4호
• /
• pp.427-434
• /
• 2015

Coronal Mass Ejections (CME), which originate from active regions of the Sun's surface, e.g., sunspots, result in geomagnetic storms on Earth. The variation of the Earth's geomagnetic field during such storms induces surface currents that could cause breakdowns in electricity power grids. Hence, it is essential to both monitor Geomagnetically Induced Currents (GICs) in real time and analyze previous GIC data. In 2012, in order to monitor the variation of GICs, the Korean Space Weather Center (KSWC) installed an induced current measurement system at SINGAPYEONG Substation, which is equipped with 765 kV extra-high-voltage transformers. Furthermore, in 2014, two induced current measurement systems were installed on the 345 kV high-voltage transformers at the MIGEUM and SINPOCHEON substations. This paper reports the installation process of the induced current measurement systems at these three substations. Furthermore, it presents the results of both an analysis performed using GIC data measured at the SINGAPYEONG Substation during periods of geomagnetic storms from July 2013 through April 2015 and the comparison between the obtained GIC data and magnetic field variation (dH/dt) data measured at the Icheon geomagnetic observatory.

• 한국정보전자통신기술학회논문지
• /
• 제9권5호
• /
• pp.511-517
• /
• 2016

손 부위의 인체측정자료는 시용자중심 설계의 관점에서 수부와 관련된 다양한 제품의 설계에 중요한 요소이다. 전통적인 인체치수조사에서 측정자를 사용하는 직접측정법은 측정 시간의 누적, 원천 자료 미확보, 측정자간 신뢰도 등에 대한 단점을 가지고 있다. 이를 보완하기 위한 3D 스캐너는 고비용, 이동성 제한 등의 단점을 가지고 있다. 이러한 단점들을 보완할 수 있는 사진측량법에 의한 손 부위 인체측정자료의 효율적인 수집에 관한 연구를 수행하였다. 직/간접 측정 결과의 비교 과정에서 발생할 수 있는 오차를 최소화하기 위하여 시뮬레이션 환경에서 직/간접 측정을 실시하였다. 사진측량법을 이용한 손 부위 인체치수의 측정 가능성을 확인하였다.

• 패션비즈니스
• /
• 제15권6호
• /
• pp.134-147
• /
• 2011

This research was motivated to provide the Korean apparel companies doing business in China with some basic data useful to the development of their apparel commodities. As a result of selecting the standard or 'A' somatotype based on the body measurement data of the Chinese women in their early 20's and then, analyzing the correlated distribution and the most frequent intervals, it was found that 'height 160,' 'bust circumference 84' and 'waist circumference 66' were most prevalent. It was found that their average body measurements almost coincided with the standard '160A-84/66.' As discussed above, the researcher selected 13 women corresponding to '160A-84/66' in reference to 2008 body measurement data, and chose 6 women among them secondarily. Then, the researcher comparatively analyzed the direct measurement data and the 3D measurement ones, while analyzing the vertical/horizontal sagittal and Median plane section drawings, it was found that Subject 4 showed the most common somatotype data, while her upper body bent backwards reflected the population most properly.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1331-1333
• /
• 2001

In this study a measurement equipment was designed and made for the nonlinear dielectric constants in dielectrics. The determining method of the nonlinear dielectric constants also was proposed. The measurement equipment was consisted of the wave generation part, the high voltage amplifier part, the measurement part and the data acquisition part. In this equipment the measurement control and the data processing could be conducted by computer. In order to determine the nonlinear dielectric constants alternating sign-wave electric fields are applied to dielectrics with different magnitude and the waves of the electric fields and the response from dielectrics are stored in computer memories. The harmonics of dielectric displacement are obtained by the Fourier transformation of these waves. The nonlinear dielectric constants are determined at the relatively low-field region. The experiment for PZT ceramic samples was done by the equipment and the determining method and as the result meaningful data were obtained.

• 통합자연과학논문집
• /
• 제5권3호
• /
• pp.157-162
• /
• 2012

Measurement error is one of main source of error in survey. It is generally defined as the difference between an observed value and an underlying true value. An observed value with error may be expressed as a function of the true value plus error term. In some cases, the measurement error variance may be also a function of the unknown true value. The error variance function can be rewritten as a function of true value multiplied by a scale factor. This research explore methods for estimation of the measurement error variance based on the data from complex sampling design. We consider the case in which the variance of mesurement error is a linear function of unknown true value, and the error variance scale factor is small. We applied our results to the U.S. Third National Health and Nutrition Examination Survey (the U.S. NHANES III) data for empirical analyses, which has replicate measurements for relatively small subset of initial respondents's group.