• 터널과지하공간
• /
• 제30권2호
• /
• pp.164-179
• /
• 2020

지반구조물에 대한 한계상태설계법의 적용에 있어서 단위중량, 포아송비, 변형계수, 점착력 및 내부마찰각 등은 설계의 정확성 및 신뢰도 향상에 매우 큰 영향을 미치는 지반특성값이다. 특히 풍화토 및 풍화암 등 풍화대에 지반구조물이 위치하게 될 경우 이들 지반특성값 중에서도 점착력과 내부마찰각이 구조물과 지반의 하중 및 저항계수를 판정하는데 매우 높은 연관성이 있으며 따라서 공내전단시험과 같은 현장시험으로부터 구해지는 이들 지반정수의 정확한 산정은 지반구조물의 최적설계를 좌우하는 중요한 요소이다. 본 연구에서는 국내 38개 시공사례 분석을 통해 이들 지반정수들의 설계적용 사례를 검토, 현장시험의 중요성을 확인하였으며 이를 토대로 ASTM에서 규정하는 모든 표준절차를 반영하는 새로운 풍화대 강도특성 측정장치를 개발하였다. 또한 본 장비의 현장적용을 통해 시험장비 및 시험자의 주관적 오류에 의한 오차발생 가능성을 최소화한 장비의 개선성능을 확인하였으며, 이를 토대로 한계상태설계법의 적용 시 핵심 지반특성값의 정량적 산정을 위한 기틀을 마련하였다.

• 대한의료기공학회지
• /
• 제20권1호
• /
• pp.118-147
• /
• 2020

Objective : The purpose of this study is to understand trends of pelvic correction therapy in Korea and to assist research activities on pelvic correction therapy. Also, this study selected and presented indicators for measuring pelvic slope to help ensure consistent studies with uniform indicators in future studies related to pelvic correction. Methods : The following keywords "골반", "골반 교정", "골반 변위" "Pelvic correction" were searched on three specialized search sites (RISS, NAI, DBpia). Trends in pelvic correction therapy were analyzed through the selected researches suitable among these searched researches in an overview format. Results : 1. A total of 7,806 studies were searched and a total of 268 studies were finally selected. 2. Studies began in 1977 and have been actively studied until recently, with 35 studies in 2017 being the most recent trend since 2000. 3. In the results according to the Main Field of Research, the 'Arts and Kinesiology'(113, 42.16%) and 'Medicine and Pharmacy'(103, 38.43%) were the most in order. To the Middle Field, the 'Kinesiology was the largest with 96(35.82%) studies. 4. In the results according to the study design, 'Pre-Post Test(PPT)' was the largest with 107 studies. 5. In the results according to the Intervention, 'Exercise' was the largest with 165 studies, of which 'Pilates' and 'Yoga' in 'Training' was the largest. 6. Among the evaluation method, the 'Pelvic Index' was used 146 times, followed by 'Spinal Alignment (99)', 'Other Joints (93)', and 'Kinetic Specialized Measurement Test (56)'. 7. Among the evaluation methods, the pelvic slope measurement indicators were PT (58), PH (48), Pelvic Torsion (40), Iliac Crest (38), ASIS-PSIS distance/angle (27), and Pelvic Width (I.W., I.L., S.W) (25) in order. 8. The journals that published the most researches were KJSS(Korean Alliance For Health, Physical Education, Recreation, And Dance;9), and JKPT(Korean Physical Therapy;9). Among the University, the Graduate School of Silla University published the most papers (12). 9. The author who published the most studies were Seungjin Park(3), the co-authors were Hoseong Lee, Gideok Park, Seongsu Bae(3), and the Thesis-Director Gyeongok Lee(7). Conclusions : 1. Studies on pelvic correction treatment continue to increase every year. 2. The main academic field of pelvic correction is 'Sports', 'Physical Therapy', and 'Medical Science'. 3. The most chosen research design method in the study on pelvic correction treatment was 'Pre-Post Test(PPT)', primarily as an intermediary, Pilates and yoga during exercise therapy, and then Chiropractic during handcraft were used as multiple frequencies. 4. Among the various measurement method indicators of pelvic correction previously used, multiple frequency was taken up in the order of PT, PH, Pelvic Torsion, iliac crest, ASIS-PSIS distance/angle, and pelvic width (I.W.,I.L.,S.W). Typically, measurements through "ASIS-PSIS angle" are recommended and are considered as the most rational in clinical trials.

• 대한방사선기술학회지:방사선기술과학
• /
• 제35권2호
• /
• pp.83-92
• /
• 2012

경추 정면 방사선검사시 하악골, 후두골의 겹침방지, 경추 추체의 배열 및 관절의 형태 등을 관찰하기 위하여 X선 입사각을 머리 방향으로 $15{\sim}20^{\circ}$를 주고 있는 것이 보편적이다. 하지만 한국인의 체형에 맞는 입사각에 대한 연구는 거의 이루어지지 않고 있다. 이에 본 연구에서는 한국인에 적합한 입사각을 찾고, 방법을 제시하는데 목적이 있다. 입사각을 측정하기 위하여 서산에 위치한 S병원을 내원한 환자 1,044명을 대상으로 하였으며, 제 2번~제 5번 경추의 길이, 피사체-영상판 거리(OID), 제2번경추(axis)의경사도, 초점-영상판 간거리(FID)를 측정하였으며, 연령대 성별에 대한 평균값을 측정하여 적용공식에 의하여 입사각을 산출하였다. 경추 제2번~제5번의 평균길이는 6cm 이였으며, 10대부터 20대까지는 경추의 길이가 커지고 30대 이후로는 경추의 길이가 작아졌으며, 남성과 여성의 차이는 약 1cm 차이가 나타났다(p<.001). OFD는 연령대, 성별과 상관없이 거의 같은 값이 측정이 되었다. 제2번 경추(axis)의 경사도는 10대와 20대는 경사도가 증가하였지만, 30대 이후로는 작게 나타났다. 또한 남성과 여성은 약 $2^{\circ}$차이가 났다(p<.001). FID의 측정 결과, 연령대, 성별과 상관없이 거의 같은 값이 측정되었으며, 이 값으로 입사각을 측정한 결과, 10대는 $15.9^{\circ}$, 20대 $16.9^{\circ}$, 30대 $16.6^{\circ}$, 40대 $16.2^{\circ}$, 50대 $15.9^{\circ}$, 60대 $14.5^{\circ}$로 측정되었다. 10대와 20대까지 입사각이 증가하였지만, 30대 부터는 입사각이 작게 나타났다. 또한 10대는 남성과 여성이 같은 값으로 측정이 되었고, 20대부터는 남성과 여성이 $2^{\circ}$ 차이가 나타났다. 입사각과 제 2번~제 5번 경추의 길이측정, OID, 제 2번 경추의 경사도, FID와의 상관관계를 실시하였고, 입사각과 모두 유의한 상관관계가 나타났다(p<.001). 본 연구에서 경추의 평균 길이, OID, FID, 제2번 경추(axis)의 경사도에 따라서 입사각이 다르게 나타났고, 성별과 연령에 따라 입사각이 다른 것을 알 수 있었다. 그러므로 경추 정면검사 시 연령, 성별을 고려하여 입사각을 설정하면서 검사를 시행하여야 함이 사료되며, 향후 경추검사의 입사각을 설정할 때 참고 자료로 이용될 것으로 기대된다.

• 한국방사선학회논문지
• /
• 제12권1호
• /
• pp.115-122
• /
• 2018

본 연구에서는 CT영상기반 3차원 고관절모델을 이용한 컴퓨터시뮬레이션을 통해서 고관절의 운동범위(Range of Motion)를 측정하는 방법을 제시하였다. 본 연구에서는 그 측정방법에 대한 기술적인 사항을 제시하고, 그 기술이 재현성 있게 실현할 수 있도록 대퇴골두 중심점의 결절, 대퇴골 외전(Abduction)/내전(adduction)회전축, 굽힙(flexion)/신전(extension) 회전축을 정의하고 측정하는 명확한 방법을 제시하였다. 외전각은 해부학적인 시상면(Sagittal plane)상의 Anterior-Posterior축에 대해 아래쪽(Inferior)면으로부터 Lateral 쪽으로의 회전각으로 정의된다. 최대외전각은 대퇴골두가 엉덩이뼈(Pelvis)의 절구(Acetabulum)의 테두리와 겹치지 않고 Anterior-Posterior축을 중심으로 회전할 수 있는 최대 외전각으로 결정된다. 굴곡각은 해부학적인 관상면(Coronal plane)상의 Medial-Lateral축에 대해 아래쪽(Inferior)면으로부터 회전각으로 정의된다. 최대굴곡각은 대퇴골이 Medial-Lateral축을 중심으로 엉덩이뼈(Pelvis)의 절구(Acetabulum)의 테두리와 겹치지 않고 회전할 수 있는 최대 굴곡각으로 결정된다. 정상고관절에 비해 인공고관절술을 받은 해당 환자의 경우, 외전에서는 60도 정도, 굽힘에서는 4도 정도 운동범위가 줄어들 수 있다는 예측이 나왔다. 본 연구에서 행한 시뮬레이션을 해보고 외전의 경우 운동범위의 감소가 예측되므로, 대퇴골두를 조금 큰 것을 고르거나 대퇴골목부의 길이 (femoral neck offset)를 길게 시술해야 할 필요가 있음을 의미한다.

• 대한족부족관절학회지
• /
• 제15권2호
• /
• pp.68-71
• /
• 2011

Purpose: To analyze relation between age or parameters measured before operation and cartilage erosion of the first metatarsal head measured during operation. Materials and Methods: The study was targeted at 56 patients and 79 feet, who underwent Scarf osteotomy or Scarf and Akin osteotomy from November 2009 through November 2010, and whose cartilage lesion of the first metatarsal head referred to the cartilage grade III or IV of the International Cartilage Repair Society. The measurement parameters were age, hallux valgus angle, intermetatarsal angle (1~2), tibial sesamoid position, proximal articular set angle and distal articular set angle. The cartilage erosion of the first metatarsal head was measured by one surgeon using cellophane. Occupancy rate and frequent involved sites of the cartilage erosion were recorded using Auto$CAD^{(R)}$ and adobe Illustrator CS4 program. SPSS correlation test and T-test were used for statistical analysis of the parameters and the cartilage erosion. Results: The cartilage erosion was incurred frequently in the sagittal groove and the site where subluxation or dislocation of the tibial sesamoild bone occurred but frequent involved sites had no statistical significance with cartilage erosion. The age showed a statistical significance with the cartilage erosion in the correlation test (p=0.003). Especially, the group of over 51 year old patients was turned out to have association with the cartilage erosion, compared to the group of below 51 (p=0.007). But, hallux valgus angle, intermetatarsal angle (1~2), tibial sesamoid position, proximal articular set angle and distal articular set angle were no statistical significance with the cartilage erosion. Conclusion: We found the more the age of patients increased (especially above 51), the more cartilage erosion increased. And it is thought that we pay attention to reduce tibial sesamoid bone.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.283-292
• /
• 1996

This study was performed to determine the physical properties of rice hull and straw which could be used for an optimum design and operation of the handling facilities for these rice crop by-products. The properties measured were kinetic friction coefficient , bulk density, and dynamic and static angle of repose. Rice hulls with moisture content of 13% and 21% were used throughout the test while rice straws of 10% and 16% moisture were chopped into 10mm length and used for the test. Friction coefficient was calculated from the horizontal traction forces measurement when a container holding the mass of rice hull and straw was pulled over mild steel. PVC, stainless steel, and galvanized steel surface by a universal testing machine. Bulk density was measured by an apparatus consisting of filling fundel and a receiving vessel. Dynamic angle of repose which is the angle at which the material will stand when piled was calculated from the photos of bulk samples after they were flowed by gravity and accumulated on a circular surface. Static angle of repose which is the angle between the horizontal and the sloping side of the material left in the container when discharging was also measured in the similar way. Results and conclusions from this study are summarized as follows . 1. Kinetic friction coefficient of both rice hull and straw were in the range of 0.26 -0.52 and increased with the moisture content. The magnitude of friction increased in the order of galvanized steel, stainless steel, PVC ,and mild steel. 2. Bulk densities of rice hull decreased while those of rice straw increased with moisture content increase . Average bulk densities of rice hull and straw were 96.8 and 74.7kg/㎥, respectively. 3. Average dynamic angle of repose for rice straw was 32.6$^{\circ}$ and those for 13% and 21% moisture rice hull were 38.9$^{\circ}$ and 44.9$^{\circ}$ , respectively. 4. Static angles of repose for both rice hull and straw showed increase with the moisture content. The values were 75.2\ulcorner and 80.2$^{\circ}$ for 13% and 21% moisture rice hull, respectively. Rice straws having 10% and 16% moisture content showed 87.3% and 89.2$^{\circ}$ static angle of repose, respectively.

• 대한족부족관절학회지
• /
• 제18권4호
• /
• pp.165-172
• /
• 2014

Purpose: We evaluated the correlation of postoperative clinical outcomes and radiologic findings using computed tomography and simple X-ray in intra-articular calcaneal fractures. Materials and Methods: The current study is based on 41 feet, 38 patients with displaced intra-articular fracture who underwent surgical treatment with at least one year of follow-up. Evaluation of clinical outcome included American Orthopaedic Foot and Ankle Society (AOFAS) ankle-hindfoot score, visual analogue scale (VAS) score, and subjective satisfaction. A simple X-ray was used in evaluation of preoperative and postoperative Gissane angle, B${\ddot{O}}$hler angle, and calcaneal fracture width. Computed tomography scan was performed for evaluation of preoperative and postoperative articular step-off and articular gap in all cases. Finally, we evaluated the correlation of the postoperative clinical outcomes and radiologic findings based on the measurement. Results: The average postoperative AOFAS score and VAS score was $84.1{\pm}8.5$ and $2.2{\pm}2.2$. Subjective satisfaction was excellent in 15 cases, good in 19 cases, and fair in seven cases. The average B${\ddot{O}}$hler angle was restored from $11.1^{\circ}$ to $24.7^{\circ}$(p<0.05), Gissane angle was changed from $121.0^{\circ}$ to $119.0^{\circ}$ (p>0.05), and the average width was restored from 45.8 to 35.0 mm (p<0.05). The average articular step-off and gap were decreased from 6.3 to 2.0 mm and from 11.1 to 4.6 mm, respectively (p<0.05). No significant correlations were observed between the clinical outcome and Gissane angle, B${\ddot{O}}$hler angle, and width, and there was no significant correlation between the clinical outcome and Sanders classification. However, postoperative articular step-off showed correlation with VAS and AOFAS score and articular gap showed correlation with VAS score. Conclusion: The clinical outcome did not show correlation with B${\ddot{O}}$hler angle and Gissane angle but did show correlation with anatomical reduction of the posterior facet joint.

• 터널과지하공간
• /
• 제20권6호
• /
• pp.455-464
• /
• 2010

평면이방성 암석의 특성을 실험적으로 규명하기 위하여 이방성각도에 따른 일축압축강도 및 변형률, 탄성상수의 변화를 분석하였다. 실험에는 유상구조가 뚜렷한 유문암의 7개의 서로 다른 각도를 갖는 총 35개 시험편을 사용하였다. 본 연구의 제 1보에서는 시험자료의 각도에 따라 개별적인 분석을 주로 논의하였으며, 제 2보에서는 이들 자료를 종합적으로 검토할 것이다. 수평 및 수직시료에서는 가정식을 적용하지 않고 4개의 탄성상수를 얻을 수 있기 때문에 이들의 크기는 참값이라 결정할 수 있다. 변형률 측정에서 각도에 따라 자료의 분산 정도가 달라지는데, 작은 각도에서는 큰 각도보다 분산이 크게 나타났다. 겉보기 탄성계수의 변화는 각도에 따라 M자 또는 U자 형태로 측정되었다. 낮은 각도에서는 겉보기 탄성계수의 변화가 단조증가의 경향을 보이지 않으므로 Saint-Venant 식을 적용될 수 없으며, E1의 크기는 참값범위에 포함되는 값을 얻을 수 없다. 75도 각도의 시료는 변형률과 강도의 측정 편차가 가장 작게 나타났으며, 해석된 4개의 모든 탄성상수가 참값의 범위에 포함되었다. 따라서 만약 한 개의 시험편에서 평면이방성의 탄성상수를 얻고자하는 경우에, 이방성각도가 75도 근처의 시험편을 선정하는 것이 바람직하다.

• Wind and Structures
• /
• 제28권2호
• /
• pp.71-87
• /
• 2019

The yaw and interference effects of blades affect aerodynamic performance of large wind turbine system significantly, thus influencing wind-induced response and stability performance of the tower-blade system. In this study, the 5MW wind turbine which was developed by Nanjing University of Aeronautics and Astronautics (NUAA) was chosen as the research object. Large eddy simulation on flow field and aerodynamics of its wind turbine system with different yaw angles($0^{\circ}$, $5^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$ and $45^{\circ}$) under the most unfavorable blade position was carried out. Results were compared with codes and measurement results at home and abroad, which verified validity of large eddy simulation. On this basis, effects of yaw angle on average wind pressure, fluctuating wind pressure, lift coefficient, resistance coefficient,streaming and wake characteristics on different interference zone of tower of wind turbine were analyzed. Next, the blade-cabin-tower-foundation integrated coupling model of the large wind turbine was constructed based on finite element method. Dynamic characteristics, wind-induced response and stability performance of the wind turbine structural system under different yaw angle were analyzed systematically. Research results demonstrate that with the increase of yaw angle, the maximum negative pressure and extreme negative pressure of the significant interference zone of the tower present a V-shaped variation trend, whereas the layer resistance coefficient increases gradually. By contrast, the maximum negative pressure, extreme negative pressure and layer resistance coefficient of the non-interference zone remain basically same. Effects of streaming and wake weaken gradually. When the yaw angle increases to $45^{\circ}$, aerodynamic force of the tower is close with that when there's no blade yaw and interference. As the height of significant interference zone increases, layer resistance coefficient decreases firstly and then increases under different yaw angles. Maximum means and mean square error (MSE) of radial displacement under different yaw angles all occur at circumferential $0^{\circ}$ and $180^{\circ}$ of the tower. The maximum bending moment at tower bottom is at circumferential $20^{\circ}$. When the yaw angle is $0^{\circ}$, the maximum downwind displacement responses of different blades are higher than 2.7 m. With the increase of yaw angle, MSEs of radial displacement at tower top, downwind displacement of blades, internal force at blade roots all decrease gradually, while the critical wind speed decreases firstly and then increases and finally decreases. The comprehensive analysis shows that the worst aerodynamic performance and wind-induced response of the wind turbine system are achieved when the yaw angle is $0^{\circ}$, whereas the worst stability performance and ultimate bearing capacity are achieved when the yaw angle is $45^{\circ}$.

• 한국콘텐츠학회논문지
• /
• 제9권12호
• /
• pp.546-555
• /
• 2009

안테나의 다양한 응용과 더불어 안테나 제작에 필요한 안테나 특성 측정에 관한 관심이 증대됨으로 안테나 측정 시스템의 정밀도가 더욱 필요하게 되었다. 안테나 측정시 사용자의 수동작을 기반으로 하는 기존의 시스템은 사용자의 위치 보정 작업에 기반을 함으로 오차를 유발한다. 따라서 안테나 특성의 자동 측정 시스템 도입이 필요하다. 본 논문에서는 안테나 자동 측정 시스템을 위한 안테나 추출 알고리즘을 제안한다. 제안 알고리즘은 안테나 측정 시스템에서 안테나에 대한 영상 정보 획득하고 획득된 영상 정보로부터 안테나 객체를 추출하여 안테나의 기울어짐과 위치 파라메터를 추출한다. 추출된 파라메터는 위치 및 기울어짐 각도를 보정하는데 사용되며 안테나의 자동 측정을 위해 사용된다. 제안한 알고리즘은 다양한 안테나 중 패치 안테나를 중심으로 적용되며 패치 안테나 객체가 효율적으로 추출되고 왜곡 보정을 위한 각도도 측정됨을 보여준다.