• 치과방사선
• /
• 제21권1호
• /
• pp.91-98
• /
• 1991

This study was made to analyze the positional relationship of mandible to hinge axis in normal subject as the diagnostic criteria of T.M.J. dysfunction. The author has conducted the study using the Cephalometric P-A view, and dental of 53 males and 51 females. By measurement, the standard value of cranio-facial and occlusal asymmetry in normal subject obtained. The following results were obtained: 1. Although the degree of the difference between right and left width in each measured line was small, asymmetry in normal subject could be identified. 2. In male, measurement between genial tubercle and hinge axis is 127.20±6.06㎜ in left, 125.83±6.25㎜ in right, and angle between genial tubercle and hinge axis is 48.48±3.53° in left, 49.58±3.72° in right. In female, measurement is 119.32±5.81㎜ in left, 118.82±5.35㎜ in right and angle is 48.06±2.15° in left, 48.17±2.31° in left, 48.17±2.31° in right. 3. In male, difference between left and right canine cusp tip of maxilla about X-bar is 0.70±0.59㎜, and that of central pit of first molar of maxilla is 0.98±0.75㎜. In female, difference is 0.64±0.52㎜ in canine and 0.92±0.76㎜ in molar.

• 대한기계학회논문집
• /
• 제12권3호
• /
• pp.566-574
• /
• 1988

본 연구에서는 LDV의 수광계를 비임의 진행방향에 수직한 방향으로 위치시켜 분무액적에 의한 반사 산란성분을 수광하여 검출되는 신호의 가시도에 의해 액적크기 를 측정함과 동시에 도플러변화 주파수로부터 속도를 측정하고, 이 방법의 신뢰도를 충돌식 포진법에 의하여 측정한 결과와 비교하므로써 평가하여, 관측각 90˚의 측방 산란형 LDV에 의한 분무액적의 크기와 속도의 동시측정에 관한 유용성을 살펴보고자 한다.

• 전자공학회논문지B
• /
• 제31B권2호
• /
• pp.69-79
• /
• 1994

The conventional machine vision system which has uniform rectangular grid requires tremendous amount of computation for processing and analysing an image especially in 2-D image transfermations such as scaling, rotation and 3-D reconvery problem typical in robot application environment. In this study, the imaging system with nonuiformly distributed image sensors simulating human visual system, referred to as Ploar Exponential Grid(PEG), is compared with the existing conventional uniform rectangular grid system in terms of image resolution and computational complexity. By mimicking the geometric structure of the PEG sensor cell, we obtained PEG-like images using computer simulation. With the images obtained from the simulation, image resolution of the two systems are compared and some basic image processing tasks such as image scaling and rotation are implemented based on the PEG sensor system to examine its performance. Furthermore Fourier transform of PEG image is described and implemented in image analysis point of view. Also, the range and heading-angle measurement errors usually encountered in 3-D coordinates recovery with stereo camera system are claculated based on the PEG sensor system and compared with those obtained from the uniform rectangular grid system. In fact, the PEC imaging system not only reduces the computational requirements but also has scale and rotational invariance property in Fourier spectrum. Hence the PEG system has more suitable image coordinate system for image scaling, rotation, and image recognition problem. The range and heading-angle measurement errors with PEG system are less than those of uniform rectangular rectangular grid system in practical measurement range.

• 한국멀티미디어학회논문지
• /
• 제19권7호
• /
• pp.1146-1153
• /
• 2016

The bioelectrical impedance (BI) at the inner forearms was measured using bioelectrical impedance measurement system (BIMS), which employs the multi-frequency and the two-electrode method. Experiments were performed as follows. First, while applying a constant alternating current of 800A to the inner region of the forearms, BI (Z) was measured at nineteen frequencies ranging from 5 to 500 kHz. The prediction marker (PM) was calculated for right and left forearm. The resistance (R) and the reactance (X_c) were simultaneously measured during impedance measurement. Second, a Cole-Cole plot (relationship between reactance and resistance) was obtained for left and right forearm, indicating the different characteristic frequencies (f_c). Third, the phase angle was obtained, indicating strong dependence on the applied frequency.

• 패션비즈니스
• /
• 제19권4호
• /
• pp.200-212
• /
• 2015

In order to study the foot deformity hallux valgus, the rate of which is currently increasing, 235 patients who were diagnosed with hallux valgus and treated in an orthopedic hospital in Seoul had their feet calibrated before and after surgery using 3d radio-scans. Data from 209 cases was analyzed and scored numerically. We scored 10 items for length, 4 for width, 3 for angle, and 2 for height, for a total of 20 items. Each individual's feet showed great variation in most of the items and significant differences after surgery, especially in regards to length and height, which increased after surgery. Angle, width, and length of the distal parts of the toes decreased after surgery. Based on the results of our analysis, we conclude that surgery brings about significant changes in structure and measurement of feet. This research confirmed that there is significant variation in foot form and individual differences based on lesion size and location and, thus, it is difficult for hallux valgus patients to find ready-made shoes that fit them properly. Foot changes before and after operation for hallux valgus were analyzed and the results quantified; our results should be considered during product design by shoe companies whose target is adult women.

• 한국자동차공학회논문집
• /
• 제10권6호
• /
• pp.150-157
• /
• 2002

In textured material, diffraction angle $2{\theta}$ usually shows a nonlinear relation against $sin^2{\psi}$ due to elastic anisotropy of crystals. SPHD and SPCD steel is cold-rolled carbon steel for automobile. The characteristics X-ray for stress measurement is Cr $K_{\alpha}\;and\;Mo\;K_{\alpha}$ characteristic X-ray. The $2{\theta}-sin^2{\psi}$ diagram under elastic strain seems to have a linear behavior using regression line of data but has a nonlinear behavior in distribution of data by Cr $K_{\alpha}$ characteristic X-ray. As the plastic strain of specimen increases, the nonlinearity of $2{\theta}$ with respect to $sin^2{\psi}$ increases remarkably. On the other hand, the diffraction angle $2{\theta}$ by Mo $K_{\alpha}$ characteristic X-ray shows a good linearity on $2{\theta}-sin^2{\psi}$ diagram under plastic strain as well as elastic strain. Therefore, this paper presents the measurement of residual stress in cold-rolled carbon steel for automobile using penetration depth of Mo $K_{\alpha1}$ characteristic X-ray and multiplicity factor of crystal diffraction plane.

• 제어로봇시스템학회논문지
• /
• 제11권5호
• /
• pp.406-410
• /
• 2005

A depth measurement system that consists of a single camera, a laser light source and a rotating mirror is investigated. The camera and the light source are fixed, facing the rotating mirror. The laser light is reflected by the mirror and projected to the scene objects whose locations are to be determined. The camera detects the laser light location on object surfaces through the same mirror. The scan over the area to be measured is done by mirror rotation. Advantages are 1) the image of the light stripe remains sharp while that of the background becomes blurred because of the mirror rotation and 2) the only rotating part of this system is the mirror but the mirror angle is not involved in depth computation. This minimizes the imprecision caused by a possible inaccurate angle measurement. The detail arrangement and experimental results are reported.

• 한국의류산업학회지
• /
• 제5권3호
• /
• pp.260-266
• /
• 2003

The objective of this study is to compare the general body measurements and shoulder shapes of Korean and American elderly women to supply basic data for the apparel design. The anthropometrics data was collected including both direct and indirect measurements of 283 women over the age of 55 in Korean and the American women. The statistical methods used for the analysis of measurement data are the T-test, Exploratory data analysis, ANOVA and Duncan-test respectively. The results of the T-test indicated that there is a significant difference in the 14 body measurement items except of waist circumference. The results of exploratory data analysis, an independent relationship between shoulder slope angle and forward shoulder roll of Korean women. On the other hand, there is a dependent relationship that the bigger shoulder slope and forward shoulder roll with wide cross back shoulder of American women. Comparison of mean among the three different age groups, aged 55~59 group shows significant differences in the value of difference between cross back shoulders and horizontal shoulder width. This finding indicates that the wide and forward roll shoulder needs to special pattern making like ease amount and curvature for fit and comfort for women's apparel.

• 패션비즈니스
• /
• 제11권3호
• /
• pp.1-14
• /
• 2007

This research to reveal the foot types of old males consisted of two parts. First, a questionnaire was given for 180 old men in their 60s and above who live in Busan. Second, based on this survey on the reality of shoes wearing, direct and indirect measurement were held for 200 old gentlemen. The findings are as follows: 1. Survey Results of Shoes Wearing Reality In the investigation into the reality of shoes possession and wearing, most of old males favored active casual shoes with comfortable materials (40.8%). Hardened skin (23.6%) was the greatest in foot deformation and side effects resulting from shoes wearing, while the big toe (20.1%) was most uncomfortable. The greatest requirement for comfortable shoes was shoes making feet comfortable with a good sense of wear (41.0%), followed by shoes with the soft sole to absorb shock (31.7%), shoes with diverse sizes according to shoes width (13.7%), and shoes made of soft materials in consideration of various foot shapes. 2. Results of Foot Measurement Experiments Busan's males in their 60s and above were 166.31cm (Height), 63.51kg (weight), 23.94cm (foot length), 9.75cm (foot width), and 24.26cm (instep girth). The big toe angle of old males was $11.22^{\circ}$ and the little toe angle $14.70^{\circ}$. Four foot types were classified: 1 (long big foot), 2 (small inside-developed foot), 3 (toe-tip-gathered foot), and 4 (thin flat foot).

• 한국전자파학회논문지
• /
• 제28권11호
• /
• pp.920-923
• /
• 2017

본 논문에서는 고속 주행환경 채널 측정에 적합한 SIMO 채널 사운더의 내부 파라미터를 설계하고, 5.89GHz C-ITS가 시범 설치된 여주 스마트 하이웨이에서 제안된 측정 방식을 적용하여 광대역 채널 특성을 측정하고 결과를 분석한다. 실 환경에 적합한 수신 배열 구조 설계를 바탕으로 도플러 위상 변화에 대한 선형 기울기 보상방식을 적용하여, 멀티패스 환경에서 도래각 정보 및 주변 환경에 의한 도플러 영향에 대하여 신뢰할 수 있는 결과를 제시하였다.