• 산업기술연구
• /
• 제24권A호
• /
• pp.127-131
• /
• 2004

In this paper, we proposed an optical balance using a Michelson Interferometer structure. The frequency of the interference signal is changed nonlinearly related with a weight to be measured, and this frequency change is processed by a processor to give a measured weight. Several measurements were performed and the good results were obtained with the fluctuation of about 1g.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2001년도 학술대회 논문집
• /
• pp.185-188
• /
• 2001

Magnetization loss of a Bi-2223 tape in magnetic fields parallel to the tape surface was measured by a magnetization method. The results indicate that the magnetization loss is hysteretic because the measured loss agrees well with calculated one from a critical state model. In the full field penetration case the magnetization loss increases with the frequency but in the partial field penetration case the influence of the frequency is opposite.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1982-1984
• /
• 2002

The admittance of one-port electrostatic actuator are modeled using the steady-state sinusoidal response. Also the admittance of the differential type actuator is derived taking the practical conditions into consideration, although it has no admittance in ideal case. It is a function of biasing error, driving error, and capacitive mismatch including parasitic capacitors. The validity of the admittance model is proved by comparing between the modeled and measured admittances. The distortion in the frequency response curve measured by a capacitive sensor is analyzed and it is concluded that the admittance is the main cause of this distortion.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.302-307
• /
• 2011

In this study, peak frequencies of korean traditional wind instruments according to instruments were measured for introducing quality certification system. Also major dimensions of instruments were measured too, for analysis on manufacturing precesion.

• Journal of the Optical Society of Korea
• /
• 제3권1호
• /
• pp.10-14
• /
• 1999

Via THz Time domain spectroscopy, the characterization of high conductive n-type, 1.31Ω cm silicon can be measured by directly analyzing the multiple reflections using Fabry-Perot theory. The magnitude and phase difference of total transmission show good agreement between theoretical and experimental values over a 2.5 THz frequency range with complex index of refraction and power absorption. The measured absorption and dispersion are strongly frequency-dependent, and all of the results are well fit by a Cole-Davidson type distribution.

• 한국항행학회논문지
• /
• 제6권1호
• /
• pp.52-62
• /
• 2002

본 논문에서는 출력단에 Wilkinson 전력결합기 또는 T 접합 전력결합기를 사용한 20 GHz Push-Push FET 유전체 공진기 발진기를 설계 제작하고 그 특성을 조사 연구하였다. 기본 주파수 10 GHz를 억제하고 제 2 고조파 주파수를 이용하는 20 GHz Push-Push 발진기를 $TE_{01{\delta}}$ 모드의 유전체 공진기와 GaAs MESFET를 두께 H = 20 mil(${\varepsilon}_r$=2.52) 테프론기판 위에 장착하는 구조로 설계하고 제작하였다. Wilkinson 전력결합기를 이용하여 제작된 발진기는 20 GHz에서 출력 전력이 5.67 dBm, 기본 주파수 억압특성은 -29.33 dBc, 위상 잡음은 100 kHz offset에서 -105.5 dBc/Hz 특성을 나타내었으며, T 접합 전력결합기 이용하여 제작된 발진기는 20 GHz에서 출력 전력이 -1.17 dBm, 기본 주파수 억압특성은 -17.84 dBc, 위상 잡음은 100 kHz offset에서 -102.2 dBc/Hz 특성을 나타내었다.

• The Journal of Korean Physical Therapy
• /
• 제34권5호
• /
• pp.205-211
• /
• 2022

Purpose: This study investigated the effects of an intervention that combined the abdominal drawing-in maneuver and frequency-specific neuromuscular electrical stimulation on changes in trunk muscle activity, muscle fatigue, and balance in stroke patients. Methods: Thirty stroke patients were randomly assigned to two groups. Fifteen subjects were assigned to group I which performed the abdominal drawing-in maneuver combined with low-frequency neuromuscular electrical stimulation and the other 15 subjects to group II where the abdominal drawing-in maneuver was combined with high-frequency neuromuscular electrical stimulation. Muscle activity and fatigue were measured using surface electromyography before the intervention. Balance was measured using the Trunk Impairment Scale and re-measured after six weeks of intervention for comparative analysis. Results: Both groups showed a significant increase in muscle activity and balance (p<0.05), and there was no significant difference between the groups (p>0.05). In the changes in muscle fatigue, only the experimental group II showed a significant increase in muscle fatigue (p<0.05). The difference between the groups was statistically significant (p<0.05). Conclusion: It was confirmed that among stroke patients, the combination of the abdominal drawing-in maneuver and low-frequency neuromuscular electrical stimulation was more effective in changing the muscle activity and balance of the trunk by minimizing the occurrence of muscle fatigue compared to the combination of the abdominal drawing-in maneuver and high-frequency stimulation. These results can be used as basic data for clinical trunk stabilization training.

• 풍력에너지저널
• /
• 제13권3호
• /
• pp.13-21
• /
• 2022

When a wind turbine is designed, the dynamic stability of the system as well as the dynamic characteristics of the main components such as blades, hub, main shaft and tower must be evaluated. In particular, the natural frequencies of a blade, as a main load-generating component, need to be measured and assessed by component level testing. In conventional practice, the natural frequencies of a blade are determined as the measured frequencies near the reference frequencies provided by FE analysis results. But the reference frequencies are also uncertain since designers have difficulty distinguishing the torsional mode shape among the analysis results due to the complexity of its mode shape. So, in conventional practice, the determination of a measured torsional frequency inevitably contains uncertainty. Therefore, a novel method to definitely determine the torsional frequencies from the experimental data itself is necessary. In this paper, a new methodology to measure the torsional frequency of a blade was studied from the perspective of a modal test procedure, data processing method and mode determination logic. Finally, the validity of the method that can measure torsional frequency without reference FE analysis results was verified by applying it to an actual large wind turbine blade

• 전자공학회논문지
• /
• 제51권11호
• /
• pp.107-113
• /
• 2014

60GHz 무선 통신 시스템에 적용 가능한 전압 제어 발진기와 고속 4분주기를 65nm CMOS 공정을 사용하여 설계했다. 전압제어 발진기는 전류소스와 NMOS 차동쌍 LC구조로 설계하였으며 분주기는 차동 인젝션 록킹 구조에 베렉터를 추가하여 동작주파수 범위를 조절할 수 있는 구조로 설계했다. 전압 제어 발진기와 분주기에 모두 전류소스를 추가하여 전원잡음에 따른 위상잡음 특성을 개선하였다. 전압 제어 발진기는 64.36~67.68GHz의 동작범위가 측정됐고, 고속 4분주기는 전압 제어 발진기의 동작범위에 대해 정확한 4분주가 가능하며 5.47~5.97dBm의 높은 출력전력이 측정됐다. 분주기를 포함한 전압제어 발진기의 위상잡음은 1MHz 오프셋 주파수에서 -77.17dBc/Hz이고 10MHz 오프셋 주파수에서 -110.83dBc/Hz이다. 소모전력은 전원전압 1.2V에서 38.4mW 이다 (VCO 포함).

• 전기학회논문지
• /
• 제62권7호
• /
• pp.891-897
• /
• 2013

The power system frequency plays an important role in monitoring and controlling the power system. The frequency can be measured through discrete Fourier transform (DFT) coefficients of its positive fundamental frequency. The accuracy of the frequency estimate is severely affected by noise in the power system signal and the leakage effect of the negative fundamental frequency in DFT. This paper proposes a DFT-based frequency estimation algorithm to cope with the noise as well as the leakage effect. In this algorithm, two suitable digital filters are introduced to reduce efficiently frequency estimate error due to the noise. These filters are designed to use a digital bandpass filter and a second-degree integrator. The effectiveness of the proposed algorithm in reduction of frequency estimate error is verified through simulations on noise, harmonics and frequency deviation.