• Physical Therapy Korea
• /
• v.26 no.2
• /
• pp.16-23
• /
• 2019

Background: High-heeled shoes can change spinal alignment and feet movement, which leads to muscle fatigue and discomfort in lumbopelvic region, legs, and feet while walking. Objects: This study aimed to identify the effects of different shoe heel heights on the walking velocity and electromyographic (EMG) activities of the lower leg muscles during short- and long-distance walking in young females. Methods: Fifteen young females were recruited in this study. The experiments were performed with the following two different shoe heel heights: 0 cm and 7 cm. All participants underwent an electromyographic procedure to measure the activities and fatigue levels of the tibialis anterior (TA), medial gastrocnemius (MG), rectus femoris (RF), and hamstring muscles with each heel height during both short- and long-distance walking. The walking velocities were measured using the short-distance (10-m walk) and long-distance (6-min walk) walking tests. Results: Significant interaction effects were found between heel height and walking distance conditions for the EMG activities and fatigue levels of TA and MG muscles, and walking velocity (p<.05). The walking velocity and activities of the TA, MG, and RF muscles appeared to be significantly different between the 0 cm and 7 cm heel heights during both short- and long-distance walking (p<.05). Significant difference in the fatigue level of the MG muscle were found between the 0 cm and 7 cm heel heights during long-distance walking. In addition, walking velocity and the fatigue level of the MG muscle at the 7 cm heel height revealed significant differences in the comparison of short- and long-distance walking (p<.05). Conclusion: These findings indicate that higher shoe heel height leads to a decrease in the walking velocity and an increase in the activity and fatigue level of the lower leg muscles, particularly during long-distance walking.

• Archives of Plastic Surgery
• /
• v.32 no.2
• /
• pp.155-160
• /
• 2005

The aim of this study is to establish anatomical dimension of the lip in young population in Korean, using specially designed soft ware with photographic image. We measure 13 anatomical dimensions of lips in 2,229 young people. (917 male, 1312 female, Aged from 18-33 years. Average age 19.7). Statistical analysis of these measurements of large population could offer useful information in facial plastic surgery. The mean measurements are as follows 1. Lengths (male/female) Widths of philtrum: $1.11{\pm}0.19cm/1.02{\pm}0.21cm$ Heights of philtrum: $1.6{\pm}0.24cm/1.47{\pm}0.21cm$ Heights of cupid bow: $0.88{\pm}0.16cm/0.83{\pm}0.16cm$ Height of upper vermilion: $0.74{\pm}0.16cm/0.70{\pm}0.15cm$ Height of lower vermilion: $1.08{\pm}0.17cm/1.02{\pm}0.15cm$ Height of upper lip(Rt.): $1.24{\pm}0.2cm/1.23{\pm}0.2cm$ Height of upper lip(Lt.): $1.24{\pm}0.2cm/1.17{\pm}0.19cm$ Half horizontal length of lip: $2.2{\pm}0.26cm/2.11{\pm}0.2cm$ Horizontal length of lip: $4.41{\pm}0.4cm/4.25{\pm}0.36cm$ Height of lower face: $7.1{\pm}0.58cm/6.52{\pm}0.6cm$ 2. Angles Nasolabial angle: $97.77{\pm}11.97^{\circ}/95.5{\pm}11.34^{\circ}$ Mentolabial angle: $133.88{\pm}14.65^{\circ}/129.27{\pm}13.67^{\circ}$ Angle of Cupid's bow: $111.65{\pm}13.99^{\circ}/116.75{\pm}16.2^{\circ}$ Previous reported photogrammetric measurements was difficult to implement to surgical practice. Because these were printed photographies of the same size. Therefore, in this study, we can measure a lot of objects and items more conveniently and correctly by using proportional program on computer after taking a digital photograph. Consequently, proportional measurements with photogrammetry of lip could be useful and corrective substitute for anthropometrical measuring. These data could be useful reference for preoperative consultation, surgical planning and learning anatomical measurement of lips and adjacent structures.

• Korean Journal of Remote Sensing
• /
• v.33 no.6_2
• /
• pp.1151-1157
• /
• 2017

Street Trees is an important object for urban environment improvement. Especially the height of the trees needs to be precisely measured as a factor that greatly influences the removal of air pollutants in the Urban Street Canyons. In this study, we extracted the height of the tree based on the stereo image using the precisely adjusted UAV Images of the target area. The adjustment of UAV image was applied photogrammetric SfM (Structure from motion) based on the collinear condition. We measured the height of the trees on the Street Canyon using stereoscopic vision on stereo plotting system. We also acquired the height of the building adjacent to the street trees and the average height of the road surface was calculated for accurate measurement of the height of each object. Through the visual analysis with the plotting operation system, it was possible to measure height of the tree and to calculate the relative height difference value with building quickly. This means that the height of buildings and trees can be calculated without making a 3D point cloud of UAV and it has the advantage of being able to utilize non-experts. In the future, further studies for semiautomatic/automation of this technique should be performed. The development and research of these technologies is expected to help to understand the current status of environmental policies and roadside trees in urban areas.

• Physical Therapy Korea
• /
• v.13 no.2
• /
• pp.35-42
• /
• 2006

The walker provides stability for walking for people whose lower extremities are disabled. It is important to measure and determine the appropriate height of a walker to conserve energy and to improve function. The purposes of this study were to examine effects of walker height and gait velocity on triceps, latissimus dorsi muscle activation, and energy expenditure index (EEI) during ambulation with a walker. Fifteen healthy subjects participated in this study. Each subject was assigned a walker with one of three heights (high, standard, lower height) and of two gait velocities (comfortable gait velocity or fast gait velocity). Electromyographic data were collected from triceps and latissimus dorsi, and EEI was determined from each condition. Two-way repeated analysis of variance (ANOVA) was used to determine the statistical significance. Post hoc comparison was performed with the Bonferroni test. The results of this study were summarized as follows: 1. There was a significant difference in the %MVIC of triceps among different walker height factors. Post hoc comparison revealed that %MVIC of dominant triceps brachii was more significantly increased in patients who used the higher walker than those who used the lower walker (p<.05). 2. There were significant differences in the %MVIC of the latissimus dorsi among different walker height factors and gait velocity factors. Post hoc comparison revealed that the %MVIC of dominant latissimus dorsi was also more significantly increased in patients who used the higher walker than those who used the lower walker (p<.05) and in those who used the faster gait velocity than those who used the slower gait velocity (p<.05). 3. There were significant differences in the EEI among different walker height factors and gait velocity factors. Post hoc comparison revealed that the EEI was significantly increased among those who used higher and lower walkers compared with the standard walker. The EEI was also more significantly increased among those who used the fast gait velocity than those who used the slower gait velocity (p<.05). It has been concluded that increased muscle activation in triceps and latissimus dorsi was required when the walker height increased and that more energy was exp ended when the gait velocity increased. Therefore, from the findings of this study, it is recommended that walker height be adjusted according to the purposes of gait training and that healthy subjects conserve energy when ambulating with standard walkers in a comfortable gait velocity.

• Journal of Preventive Medicine and Public Health
• /
• v.20 no.1 s.21
• /
• pp.97-113
• /
• 1987

This study was carried out to know physical growth and development, physical and nutritional indices and body fat weight and so forth by semi-longitudinal research method to measure body height, body weight, chest girth and sitting height of 260 of general high school and 306 of vocational high school 3rd grade students who are living in Seoul and born from 1966 March 1st to 1967 Feb.28th. The results are as follows: 1) Physical growth and development Growth in terms of body height showed one step straight linear development, andthat of body weight showed two step straight linear development in each section in high school. The age of cross over between two sexes of general high school students was between 10.6 to 12. 3 years in body height, between 10.8 to 13 years in body weight, between 11.2 to 14.6 years in chest girth and between 10 to 13 years in sitting height. The age of cross over between two sexes of vocational high school students was between 10.5 to 12.5 years in body height, between 10.5 to 12.5 years in body weight, between 10.5 to 12.5 years in chest girth and between 10.5 to 12.5 years in sitting height. In this periods, female group was superior to male group and after that male group was superior to female group again. The growth of vocational school students was superior to that of general school students in both sexes in terms of body height and body weight significantly. 2) Physical growth and nutritional indices In all cases of relative body weight, relative chest girth and relative sitting height, it was found to be increasing thereafter with advancing ages. In cases of $R{\"{o}}hrer$ index and Kaup index, it was found to be reaching to normal state thereafter with advancing ages. In each case of Vervaeck and Pelidisi index, it was found to be increasing and reaching to normal state thereafter with advancing ages. 3) Total body fat by vital measuring method Average values of body surface area, body volume and body density are measured indirectly by using the body height and body weight as Table 12, 13 and 14. The rate of body fat weight of general high school students was from minimum $11.96{\pm}3.53%(3.33{\pm}1.10kg$) to maximum $18.25{\pm}6.46%(9.08{\pm}2.01kg$) in male and from $25.88{\pm}3.62%(7.96{\pm}0.78kg$) to $43.00{\pm}7.22%(12.91{\pm}1.21kg$) in female. The rate of body fat weight of vocational high school students was from minimum $11.20{\pm}2.88%(3.32{\pm}1.13kg$) to maximum $17.16{\pm}5.88(10.83{\pm}3.16kg$) in male and from minimum $25.11{\pm}2.26%(7.91{\pm}0.89kg$) to maximum $42.16{\pm}7.96%(13.22{\pm}1.75kg$) in female.

• Spatial Information Research
• /
• v.20 no.3
• /
• pp.27-38
• /
• 2012

As the necessity of forest conservation and management has been increased, various forest studies using LIDAR data have been actively performed. These studies often utilize the tree height as an important parameter to measure the forest quantitatively. This study thus attempt to apply two representative methods to estimate tree height from airborne LIDAR data and compare the results. The first method based on the detection of the individual trees using a local maximum filter estimates the number of trees, the position and heights of the individual trees, and the mean tree height. The other method estimates the maximum and mean tree height, and the crown mean height for each grid cell or the entire area from the canopy height model (CHM) and height histogram. In comparison with the field measurements, 76.6% of the individual trees are detected correctly; and the estimated heights of all trees and only conifer trees show the RMSE of 1.91m and 0.75m, respectively. The tree mean heights estimated from CHM retain about 1~2m RMSE, and the histogram method underestimates the tree mean height with about 0.6m. For more accurate derivation of diverse forest information, we should select and integrate the complimentary methods appropriate to the tree types and estimation parameters.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.1
• /
• pp.16-24
• /
• 2009

This research aims to measure and analyze the dimensions of typical office chairs and desks sold in domestic market, and to suggest the modifications of national guidelines considering Korean peoples' body characteristics. The scope of this study was limited to the desktop type of computer jobs, excluding laptop environment. The dimensions of 24 different office chairs and 7 tables were measured, and their dimensions were analyzed against the Ministry of Labor (MOL) Notification and Korean Standards (KS). At the same time, the data from the Size Korea was also considered. As a result, the KS guidelines were overall fulfilled by the measured products, while the MOL Notification was not. It was found that the guidelines on the chair height, seat pan depth, lumber support height, and armrest height need to be modified. Some inconsistencies between the MOL Notification and KS were also found. It is suggested that the required dimensions specified by both guidelines should be unified.

• Proceedings of the Korean Aquaculture Society Conference
• /
• 2003.10a
• /
• pp.76-77
• /
• 2003

Olive flounder Paralichthys olivaceus larvae and early juveniles were reared for 43 days after hatching in order to observe the effects of starvation during development and metamorphosis. Morphological, histological and biochemical measurements were made to assess the nutritional condition during growth and starvation from pre-matamorphic through post-metamorphic phases. Two groups of fish were compared ; one with sufficient food supply and one under continuous starvation until death. Among morphometric analyses, both ratios of body height at anus/head height and pre-/post-anal lengths appeared to be sensitive to starvation during which substantial reduction was observed within a day of food deprivation. Histological variables as intestinal and rectal epithelial heights and gall bladder volume changed significantly with onset of starvation. The gut epithelial heights of starving fish decreased with advances in starvation, although they fluctuated during mid-metamorphic phase. In contrast, gall bladder volume increased remarkably soon after starvation. Ontogenetic changes in both gut epithelial height and gall bladder volume were evident, those associated with settlement and/or completion of metamorphosis. Abrupt decrease in the RNA/DNA ratios of starving fish were found right after onset of starvation. Even in the fed fish marked fluctuations in its ratios during metamorphosis were observed, evident by decreasing from late-metamorphic to post-metamorphic stages. These findings suggest that a combination of morphologically and histologically sensitive characteristics, and biochemical measurement could be utilized as a measure to evaluate nutritional condition related to starvation in wild olive flounder larvae and juveniles.

• Fashion & Textile Research Journal
• /
• v.3 no.5
• /
• pp.409-414
• /
• 2001

The purpose of this study was to determine the relationship between body cathexis and clothing satisfaction. The questionnaire was administered to 458 female college students in Daegu and Sangju and the results were obtained as follows. From the questionnaire, the 14 body parts were categorized into 4 factors, these being weight/girth, lower body, face, height/length. The bust girth was not included into one of these 4 factors. Subjects were dissatisfied with all of their body parts, especially with thigh, hip girth in the lower part of the body, as well as their weight. According to the Rohrer Index distribution, 99.2% of respondents were thin or normal, but means of respondents' satisfaction scores on weight and height were very low. To measure clothing satisfaction two factors were included, these being 'satisfaction with one's clothing selection ability' and 'satisfaction with one's own clothes'. The respondents were quite neutral on their clothing selection ability and their own clothes. Two factors about clothing satisfaction were correlated negatively. All of body cathexis factors were correlated positively with 'satisfaction with one's clothing selection ability' and were correlated slightly negatively with 'satisfaction with one's own clothes'.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.287-292
• /
• 2005

The flowfields generated by gaseous slot injection into a supersonic flow at a Mach number of 3.75 and a Reynolds number of $2.07{\times}10^7$ are simulated numerically. Fine-scale turbulence effects are represented by a two-equation(k-w SST model) closure model which includes $y^+$ effects on the turbulence model. Grid convergence index(GCI) is also considered to provide a measure of uncertainty of the grid convergence. Comparison is made with experimental data and other turbulence model in term of surface static pressure distributions, the length of the upstream separation region, and the penetration height. Results indicate that the k-w SST model correctly predicts mean surface pressure distribution and upstream separation length. However, it is also observed that the numerical simulation over predicts the pressure spike and penetration height compared with experimental data. All these results are taken within $1\%$ error band of grid convergence.