• Computers and Concrete
• /
• v.4 no.6
• /
• pp.477-497
• /
• 2007

The ultrasonic pulse velocity method has been widely used to evaluate the quality of concrete and assess the structural integrity of concrete structures. But its use for predicting strength is still limited since there are many variables affecting the relationship between strength and pulse velocity of concrete. This study is focused on establishing a complicated correlation between known input data, such as pulse velocity and mixture proportions of concrete, and a certain output (compressive strength of concrete) using artificial neural networks (ANN). In addition, the results predicted by the developed multilayer perceptrons (MLP) networks are compared with those by conventional regression analysis. The result shows that the correlation between pulse velocity and compressive strength of concrete at various ages can be well established by using ANN and the accuracy of the estimates depends on the quality of the information used to train the network. Moreover, compared with the conventional approach, the proposed method gives a better prediction, both in terms of coefficients of determination and root-mean-square error.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.5 no.1 s.16
• /
• pp.63-68
• /
• 2005

LSIV (Large Scale Image Velocimetry), a technique of image analysis on velocity measurement, was applied to a hydraulic model experiment of river confluence. The surface velocities measured by using LSIV showed similar results with the mean velocities by using a traditional velocimeter, While a general velocimeter can measure only local point velocity, LSIV can measure whole velocity field with one shot. When it is applied to river confluence or around a bridge pier where local flow is dominant, LSIV may be a powerful tool to measure velocity field.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.3
• /
• pp.271-278
• /
• 2014

PURPOSE: This study researched the effects of different types of high heels on the muscles surrounding the cervical spine, the thoracic spine, and the lumbar spine by analyzing muscle activation of the paraspinal muscles during walking while wearing high heels. The high heels were all of the same height: 8cm. METHODS: The 28 subjects in this experiment were females in their 20s with a foot size of 225-230mm. To measure the muscle activation of the paraspinal muscles, EMG electrodes were attached on the paraspinal muscles around C6, T7, and L5. The muscle activation during walking while wearing 8cm high wedge heels, setback heels, and french heels was measured. The measurements were performed 3 times each and the mean value of the result was used for analysis. Two kinds of velocity were used in this study. One of the velocity was 2.5 m/s. The other was 3.5 m/s. RESULTS: The muscle activation of paraspinal muscles increased significantly according to increase of walking velocity. But there was no significant difference according to the heel types. CONCLUSION: In view of the results, the height of heels and the velocity of walking are more convincing variables than the width of the heels on the muscle activation of paraspinal muscles. So wearing high heels is not recommended for those who have pain or functional problem of cervical and lumbar vertebrae.

• Journal of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.15-39
• /
• 2004

We analyse the results of mass models derived from the HI rotation! curves of spiral galaxies and find that the slope of the luminous mass-circular velocity relation is close to 4. The luminous mass-circular velocity relation with a slope of about 4 can be explained by an anti-correlation between the mass surface density of luminous matter and the mass ratio of the dark and luminous components. We also argue that the conspiracy between luminous and dark matter exists in a local sense (producing a flat or smooth rotation curve) and in a global sense (affecting the mass ratio of the dark and luminous matter), maintaining the luminous mass-circular velocity relation with a slope of about 4. We therefore propose that the physical basis of the Tully-Fisher relation lies in the luminous mass-circular velocity relation. While the slope of the luminous mass-circular velocity relation is fairly well defined regardless of the dark matter contribution, the zero-point of the relation is still to be determined. The determination of the slope of the Tully-Fisher relation needs one more step: the mean trend of the luminosity-luminous mass relation determines the overall shape (slope) of the Tully-Fisher relation. The key parameter needed to determine the zero-point of the luminous mass-circular velocity relation and the slope of the Tully-Fisher relation obviously is the luminous mass-to-light ratio.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.5
• /
• pp.611-618
• /
• 2001

The flow characteristics of a turbulent buoyant jet were experimentally investigated using a single-frame PIV system. The Reynolds number based on the nozzle exit velocity and nozzle diameter was about Re=5$\times$10$^3$. The instantaneous velocity fields in the streamwise plane passing the jet axis were measured in the near field X/D <11 with and without the temperature gradient. By ensemble averaging the instantaneous velocity fields, the spatial distributions of mean velocity, vorticity, and higher-order statistics up to third order were obtained. The temperature difference of 10$\^{C}$ does not affect a significant influence to the flow structure in the near field, but the total entrainment rate is increased slightly. The entrainment rate shows a linear variation with the streamwise distance in the region after X/D=5.0.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.2
• /
• pp.479-491
• /
• 1994

Discrete vortex method was applied for simulating an active control of turbulent leading- edge separation bubble. The leading-edge separation zone was perturbed by a time-dependent sinusoidal perturbation of different frequencies and levels. In order to describe the local sinusoidal perturbation at the separation point, a source pulsation vortex technique was proposed. The present two-dimensional vortex simulations were qualitatively compared with the experimental results for a blunt circular cylinder, where perturbation was introduced along the square-cut leading edge of the cylinder $(Kiya et al.^{(6,7)}).$ It was found that the reattachment length attained a minimum point at low levels of perturbation and two minima at a moderate higher perturbation frequency. The effects of local perturbation on the evolution of leading-edge separation bubble were scrutinized by comparing the perturbed flow with the natural flow. These comparisons were made for the distributions of mean velocity and its velocity fluctuations, intermittency and wall velocity. The motions of instantaneous reattachment in the space-time domain were demonstrated, which were also compared with the experimental findings. In order to investigate the reduction mehanism of reattachment length in the separation bubble, various cross-correlations for velocity and pressure and the relevant convection velocities were evaluated. It was observed that the convection velocity was closely associated with its corresponding pulsationg frequency.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.4
• /
• pp.355-363
• /
• 2005

A novel method for simultaneously measuring the fluid velocity and the large particle velocity in a particle-containing fluid flow is developed in this study. In this method, the fluid velocity and the large particle velocity are measured by PIV and PTV, respectively. The PIV and PTV images are obtained from the same flow images. Since a PIV result represents the average displacement of all particles in an interrogation area, it will include an error caused by the relative displacement between the large particles and the fluid. In order to reduce the false influence of large particles on the PIV calculation, the mean brightness of small PIV particle images is substituted to the locations of large particles in the PIV images. The simulation results showed that the new method significantly reduces the PIV error caused by the large particles even at the case where the large particles occupy area fraction as large as $20\%$ of the full image.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.11
• /
• pp.1459-1466
• /
• 2004

The purpose of this study is to investigate the effect of swirler angle and the aspect ratio of swirl chamber of nozzle on the characteristics of single and twin spray. The characteristics of sprays have been investigated by measuring the spray angle, droplet size and velocity. Visualization of spray was conducted to obtain the spray angle and breakup process. The spray characteristics such as droplet size and velocity were measured by Phase Doppler Anemometry(PDA). It was found that the spray angle was increased with increasing the swirler angle. For both sprays, the axial velocity and SMD were decreased with increasing the swirler angle. It was also shown that the axial velocity and SMD were decreased with increasing the aspect ratio of swirl chamber, but for the twin spray, the axial velocity and SMD were not influenced significantly by the changing the aspect ratio of swirl chamber. The effect of swirler angle on the spray characteristics was greater than the aspect ratio of swirl chamber for single spray. The nozzle pitch was one of the important factors affecting the spray characteristics of twin spray.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09b
• /
• pp.914-915
• /
• 2005

• 한국항공운항학회:학술대회논문집
• /
• 2004.11a
• /
• pp.223-226
• /
• 2004