• 한국추진공학회지
• /
• 제10권4호
• /
• pp.26-33
• /
• 2006

우주 발사체에서 고밀도 추진제를 사용함으로써 추진제 저장 탱크의 소형화에 따른 구조비 향상으로 발사체 성능 측면에서 이득을 볼 수 있다. 한국의 우주 발사체 개발에서는 로켓 연료로 발사체 선진국에서 사용하는 탄화수소계 연료인 RP-1이나 RG-1보다 밀도가 낮은 Jet A-1을 연료로 사용한다. 본 논문에서는 탄화수소계 연료 고밀도화의 일환으로 개발된 두 종류의 연료에 대해 수류시험, 연소시험 결과를 제시하고 그 결과를 Jet A-1과 비교하였다. 결론적으로, 두 종류의 고밀도 연료는 Jet A-1과 동등하거나 높은 연소성능을 나타내었으며 외부혼합형 분사기에서 연료 간 성능차이가 더 뚜렷하게 나타났다.

• 한국농공학회논문집
• /
• 제50권2호
• /
• pp.65-71
• /
• 2008

A monsoon season monitoring data from June to September, 2005 of a small forested watershed located at the upstream of the North Han River system in Korea was conducted to analyze the flow variations, the NPS pollutant concentrations, and the pollution load characteristics with respect to sampling frequencies. During the 4-month period, 1,423 mm or 79.2% of annual rainfall(1,797 mm) were occurred and more than 77%, 54% and 68% of annual T-N, $NO_3$-N and T-P loads discharged. Flow rate was continuously measured with automatic velocity and water level meters and 58 water quality samples were taken and analyzed. It was analyzed that the flow volume by random measurement varied very widely and ranged from 79% to 218% of that of continuous measurement. It was recommended that flow measurement of small forested watersheds should be continuously measured with automated flow meters to precisely measure flow rates. Flow-weighted mean concentrations of T-N, $NO_3$-N and T-P during the period were 2.114 mg/L, 0.836 mg/L, and 0.136 mg/L, respectively. T-N, $NO_3$-N and T-P loads were sensitive to the number of samples. And it was analyzed that in order to measure the pollution load within the error of 10% to the true load, the rate of sampling frequency should be higher than 89.7% of the sample numbers that were required to compute the true pollution load. If it is compared to selected foreign research results, about 10 water samples for each rainfall event were needed to compute the pollution load within 10% error. It is unlikely in Korea and recommended that thorough NPS pollution monitoring studies are required to develop the standard monitoring procedures for reliable NPS pollution quantification.

• Journal of Korean Neurosurgical Society
• /
• 제39권5호
• /
• pp.347-354
• /
• 2006

Objective : We evaluate the role of multislice computerized tomographic angiography[MCTA] in the diagnosis of intracranial vasospasm following subarachnoid hemorrhage[SAH] in patients suspected of having vasospasm on clinical ground. Methods : Between October 2003 and June 2005, patients with ruptured cerebral aneurysms of the anterior circulation clipped within 3 days of the onset were included. We performed follow-up MCTAs in patients who were suspected to have vasospasm on transcranial doppler sonography[TCD] findings and clinical grounds. Based on the clinical presentation of symptomatic vasospasm, we investigated the correlation between clinical, TCD, and MCTA signs of vasospasm and evaluated the role of MCTA in vasospasm. Results : One hundred one patients met the inclusion criteria and symptomatic vasospasm developed in 25 patients [24.8%]. We performed follow-up MCTAs in 28 patients. MCTA revealed spasm in the vessels of 26 patients. The sensitivity of MCTA was 100%. Among the 26 patients with MCTA evidence of vasospasm, 3 patients had TCD signs of vasospasm after symptomatic vasospasm presentation. Another 3 patients with symptomatic vasospasm had no TCD signs of vasospasm in daily serial recordings. Six other patients without symptomatic vasospasm showed MCTA evidence of vasospasm [false positive result] but these patients had also positive TCD signs of vasospasm. Volume rendering[VR] images tended to show significantly more exaggerated vasospasm than maximum intensity projection[MIP] images. The mean cerebral blood flow velocity of both proximal segment of the middle cerebral artery [M1] was significantly correlated with each reduced M1 diameter on MCTA [P<005]. Conclusion : MCTA could be a useful tool for evaluation and planning management of critically ill patients suspected of having vasospasm; however, more randomized controlled trials are necessary to assess these points definitively.

• 한국대기환경학회지
• /
• 제27권1호
• /
• pp.30-40
• /
• 2011

Numerical simulations were carried out to investigate the impact of SST spatial distribution on the result of air quality modeling. Eulerian photochemical dispersion model CAMx (Comprehensive Air quality Model with eXtensions, version 4.50) was applied in this study and meteorological fields were prepared by RAMS (Regional Atmospheric Modeling System). Three different meteorological fields, due to different SST spatial distributions were used for air quality modeling to assess the sensitivity of CAMx modeling to the different meteorological input data. The horizontal distributions of surface ozone concentrations were analyzed and compared. In each case, the simulated ozone concentrations were different due to the discrepancies of horizontal SST distributions. The discrepancies of land-sea breeze velocity caused the difference of daytime and nighttime ozone concentrations. The result of statistic analysis also showed differences for each case. Case NG, which used meteorological fields with high resolution SST data was most successfully estimated correlation coefficient, root mean squared error and index of agreement value for ground level ozone concentration. The prediction accuracy was also improved clearly for case NG. In conclusion, the results suggest that SST spatial distribution plays an important role in the results of air quality modeling on high ozone episode at coastal region.

• 대한원격탐사학회지
• /
• 제30권2호
• /
• pp.161-172
• /
• 2014

녹산국가산업단지가 설립된 부산 낙동강 하류는 국내에서 연약지반이 가장 깊이 분포하고 있는 지역 중에 하나이다. 연약지반의 깊이가 깊은 해안 매립지의 경우, 장기간에 걸쳐 상당히 큰 잔류침하가 발생하게 된다. 본 연구는 RADARSAT-1과 Envisat의 다중시기 SAR 영상을 이용한 차분간섭기법과 SBAS 시계열 기법을 통해, 녹산산업국가단지에서 2002년 9월부터 2007년 4월 동안에 발생된 지반침하를 관측하였다. 그 결과 연구지역의 동쪽 중앙, 서쪽 중앙, 서쪽, 해안가와 닿아있는 남단에서 최대 10 cm/yr, 평균 6 cm/yr의 속도로 지반침하가 발생되고 있음을 확인하였다. 또한 RADARSAT-1 SAR 영상을 이용한 평균지표변위도는 2001년부터 2002년까지 침하계로 관측된 현장관측자료와 비교 분석되었다. 시간에 따른 지표변위 양상이 거의 선형에 가깝게 나타나므로, 연구지역의 지반침하가 안정권에 접어들 때까지 지속적인 모니터링이 필요할 것으로 사료된다.

• 한국약용작물학회지
• /
• 제24권1호
• /
• pp.21-26
• /
• 2016

Background : Acer pictum is a deciduous tree belonging to the family Aceraceae. This study was conducted to collect basic data on mass propagation techniques by surveying the germination and growth characteristics of A. pictum seeds. Methods and Results : A. pictum seeds were harvested in 2014 on August 19, September 5, September 29 and October 31. The seeds were then sown on the same dates they were harvested. A portion of seeds harvested in August 2014 were stored at low temperatures and subsequently sown on March 11, 2015. The germination rate of A. pictum seeds was highest in seeds that were stored harvested on October 31. Mean germination time (MGT) was shortest and germination velocity (Rs) was fastest in seeds harvested on October 31. Root collar diameter, total root length, and dry weight were also highest from seeds collected October 31. Conclusions : A. pictum seeds harvested on October 31 had highest germination and growth rates compared with seeds harvested on earlier dates. It is expected that these results demonstrating optimum harvesting and sowing dates will be applicable to future seedling production for this tree species.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1268-1271
• /
• 2005

This paper proposes a compact-sized surface myoelectric sensor for myoelectric hand prosthesis. To fit the surface myoelectric sensor in the socket of the myoelectric hand prosthesis, the sensor should be a compact size. The surface myoelectric sensor is composed of a skin interface and a single processing circuit that are mounted on a single package. Since the skin interface has one reference and two input electrodes, and the reference electrode is located in middle of two input electrodes, we propose two types of sensors with the circle- and bar-shaped reference electrode, but all input electrodes are the bar-shaped. The metal material used for the electrodes is the stainless steel (SUS440) that endures sweat and wet conditions. Considering conduction velocity and median frequency of the myoelectric signal, we select the inter-electrode distance (IED) between two input electrodes as 18mm, 20mm, and 22 mm. The signal processing circuit consists of a differential amplifier with band pass filter, a band rejection filter for rejecting 60Hz power-line noise, amplifiers, and a mean absolute value circuit. We evaluate the proposed sensor from the output characteristics according to the IED and the shape of the reference electrode. From the experimental results we show the surface myoelectric sensor with the 18mm IED and the bar-shaped reference electrode is suitable for the myoelectric hand prosthesis.

• 한국음향학회지
• /
• 제34권6호
• /
• pp.455-462
• /
• 2015

동해에는 주변 수온보다 온도가 높은 난수성 소용돌이가 자주 발생되는 것으로 알려져 있다. 이러한 난수성 소용돌이의 발생은 음속구조의 변화를 야기해 음전달특성을 변화시키게 되며, 특히 원거리 음전달에 큰 영향을 줄 것으로 예상된다. 본 논문에서는 난수성 소용돌이가 확인되는 2007년 3월 23일의 수온자료를 재분석한 자료를 이용하여 난수성 소용돌이가 원거리 음전달에 미치는 영향을 분석하였다. 연구를 위해 포물선 방정식 모델을 이용해 음파 전달손실과 평균 직접 신호초과 거리를 이용한 탐지거리 성능분포분석을 수행하였다. 분석결과 난수성 소용돌이의 존재는 난수성 소용돌이가 존재하지 않을 때와는 매우 다른 음전달 특성을 보여주고 있으며, 특히 난수성 소용돌이의 경계는 음전달의 제한적인 요소가 될 수 있기 때문에 원거리 음전달에 불리할 것으로 판단된다. 이러한 난수성 소용돌이에 의한 원거리 음전달의 제한은 해저 심도가 낮을수록 더 커지는 것을 확인하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.18-21
• /
• 2009

높은 열하중하에 있는 부품의 수명은 일반적으로 다른 부품에 비해 짧은 수명을 가지고 있다. 액체 로켓의 터보펌프 터빈은 작동시간 동안 높은 회전속도로 인한 높은 원심력과 높은 온도와 같은 환경하에서 작동된다. 이와 같은 환경은 터보펌프 터빈의 저주기 피로를 야기한다. 우선 열응력을 해석하기 위해 ABAQUS/CAE가 사용되었으며 탄성변형률과 소성변형률을 고려하기 위해 Coffin-Manson 방정식을 사용하였다. 평균응력의 변화를 고려하기 위해 S.W.T법을 사용하였으며, 열응력해석 결과로 얻어진 변형률 이력을 이용하여 터보펌프 터빈의 취약지점에 저주기피로해석을 수행하였다. 본 연구에서는 저주기 수명을 해석하기 위해 변형룰 수명 방법이 적용되었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.267-274
• /
• 2009

아음속 영역의 대류에 평행하게 압력형 스월 제트를 분사시켜 액막 분열 및 액적 크기와 분포를 실험적으로 측정하였다. 대류로 인한 거시적과 미시적인 분무 특성의 영향을 제트 $We_{\iota}$수와 기상에 대한 액상의 운동량 비를 사용하여 광학적인 방법으로 측정하였다. 낮은 제트 $We_{\iota}$수일 때는 제트의 원심력 부족으로 인해 액막을 형성하지 못하고 Rayleigh 제트 분열을 하게 된다. 높은 $We_{\iota}$수에서는 거시적인 분무 특성은 대류의 영향을 거의 받지 않지만 미시적인 분무 특성은 운동량 비가 높을수록 2차 미립화 과정을 통해 대류의 영향을 많이 받았다. 대류는 제트의 분열을 촉진시키고 스월 제트의 분무 특성을 향상하는 것으로 관찰되었다.