• 제목/요약/키워드: Mean velocity

검색결과 2,134건 처리시간 0.023초

학교건물에서 냉방부하에 따른 열적 쾌적성 평가지표 비교 연구 (A Study on the Comparison of Thermal Comport Performance Indices for Cooling Loads in the Classroom)

  • 노광철;오명도
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2004년도 춘계학술대회
    • /
    • pp.1274-1279
    • /
    • 2004
  • We performed the numerical study on the comparison of thermal comport performance indices for cooling loads in the classroom when the 4-way cassette air-conditioner is mounted on the ceiling. We investigated the velocity and the temperature distribution of the classroom as with respect to the variation of the air diffusion angle of the air-conditioner. Air diffusion performance index and Predicted mean vote were used for analyzing the characteristics of the thermal comport in the classroom and comparing their values each other. From the numerical results, we knew that the thermal comport is largely affected by the air diffusion angle and velocity of the air-conditioner. And we also found out that the qualitative tendency of the distribution between Air diffusion performance index and Predicted mean vote is very similar in all occupied zone.

  • PDF

1-D Mean Line Flow Model을 이용한 엔진 배기에너지 회수를 위한 터보컴파운드 시스템용 터빈 설계 (Turbine Design for Turbo-compound System to Recover Exhaust Gas Energy Using 1-D Mean Line Flow Model)

  • 장진영;윤정의
    • 한국자동차공학회논문집
    • /
    • 제24권1호
    • /
    • pp.74-81
    • /
    • 2016
  • The aim of this study was to find the initial design value of turbine blade for electrical type turbocompound system generating 10 kW. Turbocompound is one of the waste heat recovery system applying to internal combustion engine to recover exhaust gas energy that was about 30 % of total input energy. To design the turbine blade, 1-D mean line flow model was used. Exhaust gas temperature, pressure, flow rate and turbine rotating speed was fixed as primary boundary conditions. The velocity triangles was defined and used to determine the rotor inlet radius and width, the rotor outlet radius at shroud and radius at hub, the rotor flow angles and the number of blades.

Geostrophic Velocities Derived from Satellite Altimetry in the Sea South of Japan

  • Kim, Seung-Bum
    • 대한원격탐사학회지
    • /
    • 제18권5호
    • /
    • pp.243-253
    • /
    • 2002
  • Time-mean and absolute geostrophic velocities of the Kuroshio current south of Japan are derived from TOPEX/Poseidon altimeter data using a Gaussian jet model. When compared with simultaneous measurements from a shipboard acoustic Doppler current profiler (ADCP) at two intersection points, the altimetric and ADCP absolute velocities correlate well with the correlation coefficient of 0.55 to 0.74. The accuracy of time-mean velocity ranges from 1 cm s$^{-1}$ to 5 cm s$^{-1}$. The errors in the absolute and the mean velocities are similar to those reported previously for other currents. The comparable performance suggests the Gaussian jet model is a promising methodology for determining absolute geostrophic velocities, noting that in this region the Kuroshio does not meander sufficiently and thus provides unfavorable environment for the performance of the Gaussian jet model.

가솔린 인젝터의 연료 분무 미립화 특성에 미치는 분사 압력의 영향 (Effect of Injection Pressure on Atomization Characteristics of Fuel Spray in High-Pressure Gasoline Injector)

  • 이창식;최수천;김민규;권상일
    • 대한기계학회논문집B
    • /
    • 제24권4호
    • /
    • pp.555-560
    • /
    • 2000
  • This paper describes the macroscopic behavior and atomization characteristics of the high-pressure gasoline injector in direct-injection gasoline engine. The global spray behavior of fuel injector was visualized by shadowgraph technique. The atomization characteristics of gasoline spray such as mean diameter and mean velocity of droplet were measured by the phase Doppler particle analyzer system. In order to obtain the influence of fuel injection pressure, the macroscopic visualization and experiment of particle measurement on the fuel spray were investigated at 3,5 and 7 MPa of injection pressure under different surrounding pressure in the spray chamber. The results of this work show that the fuel injection pressure of gasoline injector in GDl engine has influence upon the mean droplet diameter, mean velocity of spray droplet, the spray tip penetration, and spray width under the elevated ambient pressure.

3축 HOT-FILM 풍속계에 의한 연장된 앞전을 갖는 삼각날개 속도장의 측정 (Velocity Field Measurements Over A Lex/Delta Wing By Triple Axis Hot-Film Anemometry)

  • 이기영;손명환;장영일
    • 한국항공우주학회지
    • /
    • 제31권9호
    • /
    • pp.1-8
    • /
    • 2003
  • 연장된 앞전을 갖는 삼각날개 위에서 시위방향의 여러 위치에서 3축 hot 필름 풍속계를 사용하여 속도장 데이터를 획득하였다. 속도장 데이터는 받음각 24도와 32도에 대하여 중심 시위선을 기준으로 한 레이놀즈수 $1.76{\times}10^6$에서 날개면에 수직한 유동단면에서 측정하였다. 3축 hot 필름 프로브에 의한 세 가지 속도 성분을 측정함으로써 연장된 앞전을 갖는 삼각날개에서의 와류장을 정량적으로 분석할 수 있었다. 날개 와류와 LEX 와류는 평균 축방향 속도가 국소 최고 속도를 갖는 영역에 존재하였다. 아울러, 앞전 근처의 날개면 위에서 주와류와 반대 방향으로 회전하는 이차와류의 생성을 관찰할 수 있었다. 측정 프로브의 유동장에의 삽입은 와류 중심 위치에 크게 영향을 주지 않음을 알 수 있었다.

Reliability of Treadmill Exercise Testing in Adults With Chronic Hemiplegia and Elderly People

  • Kim, Nam-Joe;Lee, Suk-Min;Chung, Yi-Jung
    • 한국전문물리치료학회지
    • /
    • 제14권4호
    • /
    • pp.84-90
    • /
    • 2007
  • The purpose of this study was to assess the test-retest reliability of heart rate (HR) and velocity measurements during peak effort and free treadmill walking tests in older patients with gait-impaired chronic hemiparetic stroke and control group. Twenty-two adults (13 men, 9 women; mean age, $73.7{\pm}5.2$ yrs) with chronic hemiparetic stroke are the experimental group. Nineteen elderly people (5 men, 14 women; mean age, $72.3{\pm}3.5$ yrs) were recruited as control group. Patients had mild to moderate chronic hemiparetic gait deficits, making handrail support necessary during treadmill walking. Free and peak effort treadmill walking tests were measured and then repeated at least two days later. Reliability was calculated from HR and walking velocity during free and peak effort treadmill walking test. Among the people who had strokes, HR [ICC(2,1)=.85, r=.86] and velocity [ICC(2,1)=.93, r=.93] were good parameters during free testing. Maximal testing generated good results for HR [ICC(2,1)=.81, r=.82] and velocity [ICC(2,1)=.96, r=.96] with the chronic hemiparetic stroke. In elderly people, HR [ICC(2,1)=.59, r=.62] and velocity [ICC(2,1)=.77, r=.76] were moderately reliable during free testing. Maximal testing produced moderate parameters for HR [ICC(2,1)=.74, r=.74] and velocity [ICC(2,1)=.66, r=.66] in the elderly. This study provides that free and maximal treadmill testing produce highly reliable HR and velocity measurements in adults with chronic hemiplegia using minimal handrail support.

  • PDF

톱니형 휜이 부착된 원주의 근접후류특성 연구 (II) - 시간평균 유동장 비교 - (Characteristics of Near Wake Behind a Circular Cylinder with Serrated Fins (II) - Comparison of Time Mean Flow Fields- -)

  • 류병남;김경천;부정숙
    • 대한기계학회논문집B
    • /
    • 제26권8호
    • /
    • pp.1191-1200
    • /
    • 2002
  • The measurements of velocity vectors are made in the near wake(X/d=5.0) of a circular cylinder with serrated fins. Velocity of fluid which flow through fins decreases as increasing fin height and freestream velocity and decreasing fin pitch. Therefore the velocity distribution at X/d=0.0 has lower gradient with increasing freestream velocity and fin height and decreasing fin pitch. The discontinuity of the streamwise velocity gradient is observed near the fin edge and causes significant changes in V-component velocity distribution in the near wake. This change attributes to the differences in Strouhal number and entraintment flow behavior. Increased turbulent intensity around a circular cylinder due to the serrated fins and entrainment flow are important factors for the recovery of velocity defect. The widths of velocity and turbulent intensity distribution of fin tubes are wider than those of a circular cylinder. The normalized velocity and turbulent intensity distributions with a hydraulic diameter which is proposed in this paper are in closer agreement with those of a circular cylinder.

MASS TRANSPORT IN FINITE AMPLITUDE WAVES

  • 김태인
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 1988년도 제30회 수공학연구발표회논문초록집
    • /
    • pp.29-36
    • /
    • 1988
  • A general scheme is developed which determines the Lagrangian motions of water particles by the Eulerian velocity at their mean positions by use of Taylor's theorem. Utilizing the Stokes finite-amplitude wave theory, the mass transport velocity which includes the effects of higher-order wave components is determined. The fifth-order theory predicts the mass transport velocity less than that given by the existing second-order theory over the whole depth. Limited experimental data for changes in wave celerity in closed wave flumes are compared with the theoretical predictions.

  • PDF

기반암 깊이와 토층 평균 전단파속도를 이용한 국내 지반분류 방법 및 지반 증폭계수 개선 (Development of Site Classification System and Modification of Site Coefficients in Korea Based on Mean Shear Wave Velocity of Soil and Depth to Bedrock)

  • 김동수;이세현;윤종구
    • 대한토목학회논문집
    • /
    • 제28권1C호
    • /
    • pp.63-74
    • /
    • 2008
  • 본 논문에서는 국내 125개 지반에 대한 지층 구성, 전단파속도 주상도, 기반암 깊이 등을 기존 자료의 수집 및 부분 시험 수행을 통해 확보하여 지진응답해석을 수행하였고, 이를 바탕으로 기반암이 얕아 대부분의 지반조사가 기반암까지 이루어지는 국내 지반조건에 적합하도록 기반암 깊이와 토층 평균 전단파속도를 동시에 고려하는 2-매개변수 지반분류 방법을 새롭게 제안하였다. 우선, 기반암 깊이(H)에 대해 10m와 20m를 경계 값으로 설정하여 $H_1$ 지반(H<10m), $H_2$ 지반($10m{\leq}H<20m$) 그리고 $H_3$ 지반($H{\geq}20m$)으로 분류하고 이후, 토층 평균 전단파속도($V_{s,soil}$)를 추가 변수로 하여 총 7개의 지반그룹으로 세분화 하였다. 또한 각 지반그룹에 대하여, 지진응답해석 결과로부터 획득한 지반 증폭계수의 경향성과 그 분산정도를 분석하여 새로운 지반분류 방법의 타당성을 입증하고, 각 지반그룹별 대표 지반 증폭계수 및 설계응답스펙트럼도 함께 제안하였다. 제안된 지반 증폭계수와 이를 대표하는 추세선은 암반노두 가속도의 변화에 따른 지반의 비선형성을 일정한 경향성과 함께 효율적으로 표현하고 있다. 또한 지진응답해석으로부터 획득한 스펙트럴 가속도의 평균값과 제안된 설계응답스펙트럼을 비교한 결과, 일부 지반그룹에서 차이가 발생하였고, 추후 지반 증폭계수 계산을 위한 적분구간을 국내 지반조건에 적합하도록 개선할 필요가 있음을 확인하였다.

Turbulent Mixing Flow Characteristics of Solid-Cone Type Diesel Spray

  • Lee, Jeekuen;Shinjae Kang;Park, Byoungjoon
    • Journal of Mechanical Science and Technology
    • /
    • 제16권8호
    • /
    • pp.1135-1143
    • /
    • 2002
  • The intermittent spray characteristics of the single-hole diesel nozzle (d$\sub$n/=0.32 mm) used in the fuel injection system of heavy-duty diesel engines were experimentally investigated. The mean velocity and turbulent characteristics of the diesel spray injected intermittently into the still ambient were measured by using a 2-D PDPA (phase Doppler particle analyzer) . The gradient of spray half-width linearly increased with time from the start of injection, and it approximated to 0.04 at the end of the injection. The axial mean velocity of the fuel spray measured along the radial direction was similar to that of the free air jet within R/b= 1.0-1.5 regardless of elapsing time, and its non-dimensional distribution corresponds to the theoretical velocity distributions suggested by Hinze in the downstream of the spray flow fields. The turbulent intensity of the axial velocity components measured along the radial direction represented the 20-30% of the U$\sub$cι/ and tended to decrease in the outer region. The turbulent intensity in the trailing edge was higher than that in the leading edge.