• The Journal of the Korean life insurance medical association
• /
• v.2 no.1
• /
• pp.152-181
• /
• 1985

A statistical analysis on the cardiothoracic ratio in insurance medicine was carried out for 5,200 insured persons who were medically examined including photofluorography of the chest at the Honam medical department, Dong Bang life insurance Company, Ltd from November, 1979 to August, 1984. The results were as follows: 1. The mean value of the cardiothoracic ratio in all of the insured was $44.2{\pm}4.3%$. The mean value of the cardiothoracic ratio was $43.1{\pm}4.1%$ in all males and $45.2{\pm}4.2%$ in all females, and the difference of the values between males and females showed statistical significance(P<0.001). In each age group, the mean value of the cardiothoracic ratios of female was higher than that of male without exception and the difference of the values between males and females showed statistical significance(P<0.001). The mean value of the cardiothoracic ratio showed gradual increase with age from the second to sixth decade in male(P<0.05 or 0.001 after fourth decade) and from the second to seventh decade in female(P<0.05 or 0.001 from the second to sixth decade). 2. Correlation between both sexes and among age groups relating to the cardiothoracic ratios of the insureds seen to be a physiological phenomenon of the cardiac size and should be considered on the rating of the cardiothoracic ratio. Based on the correlation above mentioned and an author's assumption that the incidence of normal and abnormal cardiothoracic ratios in each age group would show the same rate in male and female, author prepared a modified rating table from the existing table; in male group the existing rating table is used and in female group the ratings of 0, 30-50, 50-100 and 100-D are to calculate by the cardiothoracic ratio of 51%or under, 52-56%, 57-61% and 62% or over respectively in the age group below 39, by the cardiothoracic ratio of 52% or under, 53-57%, 58%-62% and 63% or over respectively in the age group of 40-49, by the cardiothoracic ratio of 53% or under, 54-58%, 59-63% and 64% or over respectively in the age group over 60. 3. The relative frequency distribution polygons of the cardiothoracic ratio of both sexes drawn in a pair on one coordinate plane revealed lying in juxtaposition each other horizontally and showed the shifting of females polygon to male's one toward the direction of greater value of the cardiothoracic ratio at a short distance which increased gradually with age. 4. The minimum cardiothoracic ratio was 31.2% and the maximum cardiothoracic ratio was 63.6% in all of the insured. 5. In each age group, no significant sex difference was found in the relative frequency distribution of ratings by the cardiothoracic ratios of 5,200 insureds by using the rating table modified by author, while significant sex difference was found by using the existing rating table.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.31-39
• /
• 2010

In this study, the performance of the online GPS processing services provided by diverse institutions was compared so that domestic GPS users in geodesy and surveying can easily get precise coordinates using those services. In order to evaluate the accuracy of each online GPS processing service, we calculated coordinates of seven GPS permanent stations located in Korea and foreign countries using APPS, CSRS-PPP, AUSPOS and OPUS. And the results were compared with published coordinates by IERS and National Geographic Information Institute. In the cases of foreign stations, the mean value of the horizontal errors was 9.3 mm and the descending order of accuracies was APPS, AUSPOS, OPUS and CSRS-PPP. In the cases of Korean stations, the mean value of the horizontal errors was 37.6 mm, although the order of accuracy was similar to the foreign cases; AUSPOS, APPS, OPUS and CSRS-PPP. Also, the average value of 3-D errors in Korean cases was about 3 cm larger than that of foreign cases and a bias of 3 cm was observed in the north direction.

• Journal of Industrial Technology
• /
• v.22 no.A
• /
• pp.9-17
• /
• 2002

This analysis is aimed to find out how the conditions of secondary air injection affects the residence time and the turbulence energy of flue gas and flow field in a small incinerator. A commercial code, PHOENICS, is used to simulate the flow field of an Incinerator. The computational grid system is constructed in a cartesian coordinate system In this numerical experiment, an independent numerical variable is the conditions of secondary air injection and dependants are the residence time of flue gas and the mean value of turbulence energy in a primary combustion chamber. The flow field and the distribution of turbulence energy are analysed to evaluate the residence time of flue gas and the turbulence energy The computational results say that the tangential injection of secondary air make the residence time much longer than the radial injection and that the radial injection of secondary make turbulence much stronger than the tangential injection.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.1016-1019
• /
• 2002

This paper deals with a fundamental and classical scattering problem by a finite strip. For the analysis of scattered acoustic field, a “single” integral equation is derived. Firstly, the complexity by considering the effect of the mean flow is alleviated by the introduction of Prandtl-Glauert coordinate and the new dependent variable. Secondly, the difficulty of solving the resultant strongly-coupled integral equations which always appear in this kind of 3-part mixed boundary value problem is solved by observing some good properties of the functions in complex domain and manipulating the equations and variables for the use of those properties. The solution can be obtained asymptotically in terms of gamma function and Whittaker function. One aim of this study is the improvement of methodology for the research using integral equations. The other is the basic understanding of scattering by a finite strip related to the linear cascade model of rotating fan blades.

• Tunnel and Underground Space
• /
• v.12 no.4
• /
• pp.268-276
• /
• 2002

In this study, a 3D coordinate measurement system equipped with a laser displacement meter for digitizing rock joint surface was established and the digitized data were used to calculate several roughness parameters. The parameters used in this study were micro avenge inclination $angle(i_{ave})$, average slope of joint $asperity(SL_{ ave})$, root mean square of $i-angle(i_{rms})$, standard deviation of height(SDH), standard deviation of $i-angle(SD_i)$, roughness profile $index(R_P)$, and fractal dimension(D). The relationships between the roughness parameters based on the digitzation of the surface profile were analyzed. Since the measured value varied according to the degree of reflection and the variation of colors at the measuring point, rock joint surface was painted in white to minimize the influence of the surface conditions. The comparison of the measured values and roughness parameters before and after painting revealed the better consequence from measurement on the painted surfaces. Also, effect of measuring interval was studied. As measured interval was increased, roughness parameters were exponentially decreased. The incremental sequence of degree of decrease was $SDH\; i_{ave},\; i_{rms},\; SD_i,\;and\; R_ p-1$. As a result of comparison of parameters from pin-type measurement system and laser type measurement system, all value of parameters were higher when laser-type measurement system was used, except SDH.

• The Mathematical Education
• /
• v.37 no.1
• /
• pp.1-13
• /
• 1998

In this paper, we have represented the efficient way how to enumerate the optimal number-right scores to adjust the item difficulty and to improve item discrimination. To estimate the optimal number-right scores in two equivalent math-tests by linear score equating a measurement error model was applied to the true scores observed from a pair of equivalent math-tests assumed to measure same trait. The model specification for true scores which is represented by the bivariate model is a simple regression model to inference the optimal number-right scores and we assume again that the two simple regression lines of raw scores and true scores are independent each other in their error models. We enumerated the difference between mean value of $\chi$＊ and ${\mu}$$\_$$\chi$/ and the difference between the mean value of y＊and a＋b${\mu}$$\_$$\chi$/ by making an inference the estimates from 2 error variable regression model. Furthermore, so as to distinguish from the original score points, the estimated number-right scores y’$\^$*/ as the estimated regression values of true scores with the same coordinate were moved to center points that were composed of such difference values with result of such parallel score moving procedure as above mentioned. We got the asymptotically normal distribution in Figure 5 that was represented as the optimal distribution of the optimal number-right scores so that we could decide the optimal proportion of number-right score in each item. Also by assumption that equivalence of two tests is closely connected to unidimensionality of a student’s ability. we introduce new definition of trait score to evaluate such ability in each item. In this study there are much limitations in getting the real true scores and in analyzing data of the bivariate error model. However, even with these limitations we believe that this study indicates that the estimation of optimal number right scores by using this enumeration procedure could be easily achieved.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.4
• /
• pp.355-362
• /
• 2009

Sound source localization method based on the time delay of arrival(TDOA) is applied to many research fields such as a robot auditory system, teleconferencing and so on. When multi-microphones are utilized to localize the source in 3 dimensional space, the conventional localization methods based on TDOA decide the actual source position using the TDOAs from all microphone arrays and the detection measure, which represents the errors between the actual source position and the estimated ones. Performance of these methods usually depends on the number of microphones because it determines the resolution of an estimated position. In this paper, we proposed the localization method using spatially mapped GCC functions. The proposed method does not use just TDOA for localization such as previous ones but it uses spatially mapped GCC functions which is the cross correlation function mapped by an appropriate mapping function over the spatial coordinate. A number of the spatially mapped GCC functions are summed to a single function over the global coordinate and then the actual source position is determined based on the summed GCC function. Performance of the proposed method for the noise effect and estimation resolution is verified with the real environmental experiment. The mean value of estimation error of the proposed method is much smaller than the one based on the conventional ones and the percentage of correct estimation is improved by 30% when the error bound is ${\pm}20^{\circ}$.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.733-734
• /
• 2017

Ultrasonic, infrared, and CCD cameras are typically used to obtain location information, but the error range is large depending on the surrounding environment. However, IR-UWB can be used for distance and location measurement both indoors and outdoors, Technology. It is possible to determine the existence and distance of an object by emitting a short signal width in units of 1 ns and using a reflected signal and a time delay. It is also possible to measure the exact position within the cm error irrespective of the environmental conditions. Since it processes a large number of reflection signals, we try to measure three-dimensional spatial coordinates by improving the noise by using the mean value of the signal, the band pass filter and the FFT.

• Asia Pacific Journal of Corpus Research
• /
• v.2 no.2
• /
• pp.17-29
• /
• 2021

The current study explores small corpora of critiques written by Chinese and non-Chinese university students and how strategies used by these writers compare with high-rated L1 students. Data collection includes three small corpora of student writing; 20 student critiques in 2017, 23 student critiques from 2018, and 23 critiques from the online Michigan MICUSP collection at the University of Michigan. The researchers employ Text Inspector and Lexical Complexity to identify university students' vocabulary knowledge and awareness of syntactic complexity. In addition, WMatrix4® is used to identify and support the comparison of lexical and semantic differences among the three corpora. The findings indicate that gaps between Chinese and non-Chinese writers in the same university classes exist in students' knowledge of grammatical features and interactional metadiscourse. In addition, critiques by Chinese writers are more likely to produce shorter clauses and sentences. In addition, the mean value of complex nominal and coordinate phrases is smaller for Chinese students than for non-Chinese and MICUSP writers. Finally, in terms of lexical bundles, Chinese student writers prefer clausal bundles instead of phrasal bundles, which, according to previous studies, are more often found in texts of skilled writers. The current study's findings suggest incorporating implicit and explicit instruction through the implementation of corpora in language classrooms to advance skills and strategies of all, but particularly of Chinese writers of English.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.47-47
• /
• 2020

The Korean National Agrobiodiversity Center holds the more than 1300 accessions of proso millet, but a large portion of accessions are landrace of Korea that has very similar traits. To comprehend the maximum genetic diversity of this crop, a core collection with minimum number of accessions will facilitate easy access to genetic material. Here we assessed the genetic diversity and population structure in a germplasm collection of 830 accessions by employing EST-SSR markers and morphological traits. A total of 107 alleles were detected with an average allele number of 4.9 per locus among the 830 accessions based on 37 EST-SSR markers. The number of alleles per locus ranged from 2 to 7. Polymorphism information content and expected heterozygosity ranged from 0.06 to 0.68 (mean = 0.21) and 0.06 to 0.73 (mean = 0.23), respectively. The germplasm collection was separated into two groups based on population structure analysis, whereas principal coordinate analysis (PCoA) could not cluster accessions according to their geographic origin. Subsequently, a preliminarily developed core collection with a total of 141 accessions (17%) was selected from the whole set of germplasm by combining allelic variations of EST-SSR markers and eight different phenotypic traits. The core collection optimally represented the whole germplasm collection and displayed a similar level of PCoA value and genetic variation from the initial collection. The results obtained here provide a primary resource for further genetic analysis and establish a reference for further development of appropriate genetic breeding strategies.