• 한국결정성장학회지
• /
• 제6권3호
• /
• pp.392-398
• /
• 1996

$Si_{3}N_{4}$에 평균입경이 다른 SiC 분말을 0, 10, 20, 30, 40 vol% 첨가하여 고온가압소결법으로 초미립복합재료를 제조하였다. SiC의 첨가량에 따라 $Si_{3}N_{4}$의 결정립성장이 억제되어 원형의 미세한 결정립들이 많아졌다. 이러한 경향은 평균입경이 작은 SiC를 사용한 조성에서 현저하게 나타났다. 이에 따라 파괴강도와 경도는 작은 SiC를 첨가한 시편에서 높은 값을 나타냈으며, 파괴인성은 낮았다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 추계학술발표대회 개요집
• /
• pp.201-203
• /
• 2005

A kinetic model for particle coarsening behavior in the weld heat affected zone (HAZ) was proposed. Unlike the conventional approach, where the mean-sized particle is considered to grow continuously, the proposed model considered the critical particle size which can be derived from the Gibbs-Thomson equation. In this study, the proposed particle coarsening model was applied to study the behavior of (Ti, Nb )(C, N) complex particle in the weld HAZ. The predicted particle size distributions using the proposed model were in agreement with the experimental results.

• 대한토목학회논문집
• /
• 제4권2호
• /
• pp.25-33
• /
• 1984

활성탄(活性炭)의 입경변화(粒徑變化)가 trihalomethane의 흡착(吸着)에 미치는 영향(影響)에 관하여 실험적(實驗的)으로 연구(硏究)하였다. 실험(實驗)에 사용(使用)된 활성탄(活性炭)은 평균입경(平均粒徑)이 0.73mm에서 2.03mm까지의 4종류(種類)이었으며 이들에 대하여 물리적(物理的) 특성(特性)을 조사(調査)하고 trihalomethanedml 흡착능력(吸着能力)을 등온흡착실험(等溫吸着實驗)과 micro-column 실험(實驗)을 통해 밝혀냈다. 입경(粒徑)의 증가(增加)에 따라 비표면적(比表面積)이 감소(減少)하였고 활성탄(活性炭) 내부공극(內部空隙)의 반경(半徑)이 크게 증가(增加)하였다. 또한 큰 입자(粒子)의 경우에는 공극(空隙)의 크기가 넓게 분포(分布)하였다. Trihalomethane의 흡착(吸着)은 Freundlich 공식(公式)에 의해 잘 표현(表現)되었고 입경증가(粒徑增加)에 따라 흡착능력(吸着能力)의 감소(減少)가 뚜렷하게 나타났다. Micro-column 실험결과(實驗結果)와 모형(模型)의 Simulation으로부터 물질도달계수(物質導達係數)와 내부표면광산계수(內部表面壙散係數)를 산정(算定)하였다. 입경변화(粒徑變化)에 따른 계수(係數)의 변화(變化)는 무시(無視)할 수 있었으며 입경변화(粒徑變化)에 따른 효율(効率)의 차이(差異)는 주로 흡착능력(吸着能力)의 차이(差異)에서 오는 결과(結果)로 판단(判斷)된다.

• 한국가스학회지
• /
• 제17권4호
• /
• pp.33-38
• /
• 2013

본 연구에서는 마그네슘(Mg)분진의 폭발특성에 미치는 평균 입경의 영향을 조사하였다. 이를 위해 20-L분진 폭발시험장치와 10 kJ의 에너지를 갖는 화학 점화기를 사용하여 실험을 수행하였다. 실험에 사용한 Mg분진은 평균입경이 서로 다른 3가지 시료(38, 142, $567{\mu}m$)를 대상으로 분진농도를 $2250g/m^3$까지 조사하였다. Mg분진의 폭발하한농도(LEL)는 평균입경 38, $142{\mu}m$에 있어서 각각 30, $40g/m^3$ 이 얻어졌다. LEL은 입경 증가에 의해 감소 경향을 나타냈는데 Mg분진은 입경이 증가할수록 폭발 확률이 감소함을 의미한다. 최대폭발압력($P_m$)과 폭발지수($K_{st}$)는 입경이 증가하면 감소하였지만, 평균입경 $567{\mu}m$의 Mg분진의 경우에는 5 kJ의 착화에너지에서는 폭발 현상이 관찰되지 않았다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.210-212
• /
• 2009

In object tracking based on the particle filter algorithm controlling the proper distribution of the samples is essential to accurately track the target. If the samples are spread too wide compared to the target size, the tracking accuracy may degrade as some samples can be caught by background clutters that is similar to the target. On the other hands if the samples are spread too narrow, the particle filter may fail to track the abrupt motion of the target. To solve this problem we propose an improved particle filter that adopts "re-weighting" technique at the observe step. We estimate the distribution of the weights of the current samples by its mean and variance. Then the samples are re-weighted so that the appropriate distribution of the samples in proportional to the target scale is obtained at the next select step. The proposed tracking method can avoid convergence to local mean and improve the accuracy of the estimated target state.

• 한국염색가공학회지
• /
• 제22권3호
• /
• pp.229-238
• /
• 2010

Poly($\varepsilon$-caprolactone) nano/microcapsules(nmcPCL) containing phytoncide oil were synthesized by emulsion diffusion method using ethyl acetate and poly(vinyl alcohol) (PVA) as an organic solvent and an emulsion stabilizer respectively. The influence of the degree of saponofication of the PVA and the weight ratio of core to wall materials was investigated to design nanocapsules in terms of particle size, morphology, and emulsion stability. The encapsulated nmcPCL were characterized by FT-IR spectrometry, particle size analyzer and scanning electron microscope. Mean size of nanocapsules prepared with PVA with a degree of saponofication of 87% was smaller than those of PVA with a degree of saponofication of 98.5% and the mean particle size of the capsules decreased with increasing core/shell ratio.

• 한국대기환경학회지
• /
• 제9권3호
• /
• pp.222-229
• /
• 1993

Total suspended particles in the atmosphere were collected on the quartz fiber filters using an ANdersen Hi-volume air sampler from March 1989 to October 1989 and from June 1990 to February 1991, at Chung-Ang University in Seoul. A total amount of eight heavy metals (Cr, Zn, Cd, Pb, Fe, V, Ti, Mn) in total suspended particles were determined by ICP spectrophotometer. The annual arithmetic mean concentration of total suspended particle was 162.3$\mug/m^3$ and eight metals(Cr, Zn, Cd, Pb, Fe, V, Ti, Mn) were 11.6, 609.2, 3.5, 337.1, 2739.5, 15.1, 89.4 and 100.5ng/$m^3$, respectively. The concentration of total suspended particle was highest in the spring(343.7$\mug/m^3$) and lowest in the summer(91.8$\mug/m^3$). These heavy metals were distinguished into two groups in terms of their particle size distribution. The contents of first-group heavy metals (Fe, Ti, Mn) were increased in accordance with the growth of the particle size. The contents of the second-group ones such as Pb, Cd, V, and Zn, on the contrary, came to increase according as the particle size reduced. Statistical analysis indicated that there was a correlation between total suspended particle and Fe in coarse particles, and between total Suspended Particle and Zn, Pb in fine particle.

• Journal of Mechanical Science and Technology
• /
• 제20권11호
• /
• pp.1972-1979
• /
• 2006

This study was conducted in order to generate model particles which were similar to particles in diesel emission. Spark discharge was used for carbon agglomerates and hydrocarbon condensation for particles that consist of carbon agglomerates and hydrocarbon. The size of the carbon agglomerates, whose mean size were 30 and 70 nm, ranged between 15 and 200 nm, and the total number concentration of the particles ranged from 3 to $5{\times}10^7#/cm^3$ as the controllable variables in spark discharge generator changed. The result of the hydrocarbon condensation experiment showed that the final sizes of the particles enlarged by condensation did not depend on the initial sizes, but the maximum condensational growth of carbon agglomerates by dodecane ($C_{12}H_{26}$) condensation was 112 times the initial size of 40 nm, while the size of the agglomerates by benzene ($C_6H_6$) was 3.25 times its initial size.

• Journal of Pharmaceutical Investigation
• /
• 제28권4호
• /
• pp.249-255
• /
• 1998

Solid Lipid Nanoparticle(SLN), one of the colloidal carrier systems, has many advantages such as good biocompatibility, low toxicity and stability. In this paper, the effects of drug lipophilicity and surfactant on the drug loading capacity, particle size and drug release profile were examined. SLNs were prepared by homogenization of melted lipid dispersed in an aqueous surfactant solution. Ketoprofen, ibuprofen and pranoprofen were used as model drugs and tweens and poloxamers were tested for the effect of surfactant. Mean particle size of prepared SLNs was ranged from 100 to 150nm. The drug loading capacity was improved with the most lipophilic drug and low concentration of surfactant. Particle size and polydispersity of SLNs were changed according to the used lipid and surfactant. The rates of drug release were controlled by the loading drug and surfactant concentration. SLN system with effective drug loading efficiency and proper particle size for the intravenous or oral formulation can be prepared by selecting optimum drug and surfactant.

• 한국응용과학기술학회지
• /
• 제20권2호
• /
• pp.118-124
• /
• 2003

Silver nanoparticles was synthesized by the method of W/O microemulsions with AOT (bis(2-ethylhexyl) sodium sulfosuccinate). The nucleation particle growth and aggregation was controlled by the droplet exchange process. The intermicellar exchange reaction is varied by changing the AOT and the $H_2O$ concentration. The synthesized W/O microemulsions was found to give the nanoparticles, which was confirmed by SEM, TEM, particle-size-analyzer, and UV-spectrometer. The most stable particles was obtained at 0.056 mole AOT solution, and the particle size distribution was found in the range from 27 to 31 nm. The mean particle size was reduced by adding Tween 20 significantly, and distribution was found from 14 to 16 nm. And, It's size was reduced by cosurfactants as toluene and benzyl alcohol. In case of toluene and benzyl alcohol, the range of particle size was found 7${\sim}$11 nm and 8${\sim}$12 nm.