• Title/Summary/Keyword: Mean Residual Life

검색결과 124건 처리시간 0.019초

해안지역에서의 저압용 누전차단기 교체주기 연구 (A Study on the Life Time of RCD in Coastal Area)

  • 김종민;최명일;송길목;서정열;신진용;김창환
    • 조명전기설비학회논문지
    • /
    • 제25권1호
    • /
    • pp.85-92
    • /
    • 2011
  • The role of RCDs(Residual Current Protective Device) that are installed before the load is very important for preventing electric shock and electrical fire. However, although fault rate of RCD is increasing due to deterioration and long period usage, the RCD is permanently used without a checking of performance evaluation and it causes the electrical accident. In this paper, the amount of airborne chloride is researched in domestic costal area and the accelerated life test is conducted using a salt water spray tester in order to decide the life time of RCD. Aa a result of an accelerated life test, the MTTF(Mean Time To Failure) of RCD is 110.81 hours and B10 life time of RCD is 45.81 hours for the all samples. when an accelerated life test result is applied to within 2 km costal area, the life time of RCD is predicted about 5 years.

Assessing the EORTC QLQ-BM22 Module Using Rasch Modeling and Confirmatory Factor Analysis across Countries: a Comprehensive Psychometric Evaluation in Patients with Bone Metastases

  • Lin, Chung-Ying;Pakpour, Amir H
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제17권3호
    • /
    • pp.1405-1410
    • /
    • 2016
  • Background: The European Organisation for Research and Treatment of Cancer Quality of Life Questionnaire Bone Metastases Module (EORTC QLQ-BM22) is a recently designed supplement to EORTC Quality of Life Questionnaire-C30 (EORTC QLQ-C30). Additional psychometric properties, especially using confirmatory factor analysis (CFA) and the Rasch model, are warranted. Materials and Methods: A total of 573 patients with bone metastases were enrolled from eight countries with a mean${\pm}$SD age of $55.8{\pm}13.7years$. Slightly more than two thirds of them were female (n=383; 66.8%). CFA was used to examine the BM22 framework; Rasch models were applied to understand misfit items and differential item functioning (DIF). Results: The fit indices were satisfactory in CFA (comparative fit index=0.972, Tucker-Lewis index=0.964, root mean square error of approximation=0.076, and standardized root mean square residual=0.045). All items fit well in the Rasch models (mean square values were between 0.5 and 1.5), and only one item (number 17) displayed DIF across gender. However, there were six DIF items across Canada and Taiwan, ten across Canada and Iran, and six across Taiwan and Iran. Conclusions: The BM22 has satisfactory psychometric properties, and could assess the QoL of patients with bone metastases specifically focusing on their symptoms. Clinicians may want to use it to capture the underlying QoL for patients with bone metastases. However, the score of item 17 should be interpreted with caution when comparing male and female patients. In addition, researchers should note that variation in DIF items may occur when conducting an international study.

5% 크롬 냉간 압연용 작업롤의 피로손상 평가에 대한 연구 (Assessment of fatigue damage in 5% chrome cold rolling work roll)

  • 곽길준;김광수;이시우;여원구;박영철
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 추계학술대회논문집A
    • /
    • pp.316-321
    • /
    • 2000
  • The role of fatigue on the surface damage of 5% chrome cold milling work roll is evaluated. Uniaxial and torsional fatigue tests are carried out, and the baseline data for fatigue life evaluation are established. An appropriate multiaxial fatigue parameter is developed from the fatigue data. Fatigue tests are also performed under compressive mean stresses, and a mean stress model is formulated. A computer program is developed to assess the interaction of fatigue and grinding of the roll. The fatigue damage is computed for selected servicing conditions. It is found that the fatigue damage can be an important issue when the effect of mean stress is ignored, however the fatigue damage is negligibly small when the effect of mean stress including the residual stresses currently used is fully accounted. The result indicates that spalling due to the growth of thermal shock cracks is more important than fatigue damage in roll surface failure.

  • PDF

노인가계의 재무전략유형별 재무성과 (Financial Performance according to the Types of Financial Strategy in Elderly Households)

  • 박진영
    • 가정과삶의질연구
    • /
    • 제25권3호
    • /
    • pp.25-44
    • /
    • 2007
  • The purpose of this study was to classify the financial strategies and investigate major determinants of the financial performance in elderly households. This study used the data of 4,577households with all ages and 1,255 elderly households were from the Korean Labor and Income Panel Study(2000, 2003). The data were analyzed by various statistical methods such as frequency, mean-test, Duncan's multiple range test, k-mean cluster analysis and regression. The major findings were as follows: First, the classified household financial strategy types were Residual(44.3%), Financial Assets(24.0%), Informal Institutional(19.7%), Diversified Portfolio(7.6%), Real Estate(4.5%). Second, the criteria of classification of the financial strategies were relative, not absolute. Third, elderly households that employed a financial assets had the greatest financial performance (62,320,000 won net gain). Households with all ages that employed a diversified portfolio strategy had the greatest financial performance (98,360,000 won net gain). Forth, the determinants of the financial performance were significantly different according to the types of financial strategy.

Elastic-Plastic Stress Analysis and Fatigue Lifetime Prediction of Cross-Bores in Autofrettaged Pressure Vessels

  • Koh, Seung-Kee
    • Journal of Mechanical Science and Technology
    • /
    • 제14권9호
    • /
    • pp.935-946
    • /
    • 2000
  • Elastic-plastic stress analysis has been performed to evaluate the fatigue life of an autofrettaged pressure vessel containing cross-bores subjected to pulsating internal pressure of 200 MPa. Finite element analyses were used to calculate the residual and operating stress distributions of the pressure vessel due to the autofrettage process and pulsating internal pressure, respectively. Theoretical stress concentration factors of 3.06, 2.58, and 2.64 were obtained at the cross-bore of the pressure vessel due to internal pressure, 50%, and 100% autofrettage loadings, respectively. Local stresses and local strains determined from the elastic-plastic finite element analysis were employed to calculate the failure location and fatigue life of the pressure vessel with radial cross-bores, incorporating the low-cycle fatigue properties of the pressure vessel steel and fatigue damage parameters. Increase in the amount of overstrain by autofrettage process moved the crack initiation location from the inner radius toward a mid-wall, and extended the crack initiation life. Predicted fatigue life of the fully autofrettaged pressure vessel with cross-bores increased about 50%, compared to the unautofrettaged pressure vessel. At the autofrettage level higher than 50%, the failure location and fatigue life of the pressure vessel were not significantly influenced by the autofrettage level.

  • PDF

대차 프레임용 SM490A 용접재의 피로 특성 평가 (Fatigue Characteristics of SM490A Welded Joints for Bogie Frame)

  • 박재실;석창성;구재민;신재호;구병춘
    • 한국정밀공학회지
    • /
    • 제21권12호
    • /
    • pp.146-153
    • /
    • 2004
  • We compared the fatigue characteristics of weld metal with those of base metal, and not heat-treated with heat-treated. Also, we examined the influence of bead in a viewpoint of fatigue life. From the experimental results, it has been seen that the fatigue characteristics of welded specimens grinded the toe of bead are slightly better than not grinded. We have seen that the fatigue life is affected more by the stress concentration on the profile change in the weld toe rather than by residual stress influence, because heat-treated or not had almost no influence on the fatigue characteristics.

살충제 thiodicarb의 단감 중 잔류분석 및 안전성 평가 (Residue analysis of insecticide thiodicarb in sweet persimmon and its safety evaluation)

  • 노석초;황철환;김민수;마상용;한성수
    • 농약과학회지
    • /
    • 제8권3호
    • /
    • pp.184-188
    • /
    • 2004
  • 살충제 thiodicarb의 단감 중 안전사용기준 설정과 안전성을 평가를 위하여 처리구별 단감 중 thiodicarb의 잔류량을 GLC/NPD로 분석한 결과, thiodicarb의 가수분해 산물인 methomyl oxime의 최소검출량은 0.2 ng이었으며, thiodicarb의 검출한계는 0.05 ppm 이었다. Thiodicarb의 평균 회수율은 0.5 ppm과 2.5 ppm 수준에서 각각 $93.9{\pm}3.9%$$92.8{\pm}2.0%$이었다. 각 처리별 평균 잔류량은 수확전 2회 살포시 $1.50{\pm}0.04$ ppm, 수확전 3회 살포시 $1.86{\pm}0.04$ ppm, 수확전 4회 살포시 $2.11{\pm}0.12$ ppm으로 처리구 모두 thiodicarb의 국내 잠정 잔류허용량(maximum residue limit)인 5 mg/kg 미만이었으며, 단감의 감꼭지나방 방제를 위하여 thiodicarb 40% 수화제를 수확 14일전 4회 살포시 안전성에는 문제가 없을 것으로 판단되었다.

Neonicotinoide계 농약 dinotefuran과 thiacloprid의 오이 중 잔류특성 (Residual characteristics of Neonicotinoid Insecticide dinotefuran and thiacloprid in cucumber)

  • 이은영;노현호;박영순;강경원;이광헌;박호경;윤상순;진충우;한상국;경기성
    • 농약과학회지
    • /
    • 제13권2호
    • /
    • pp.98-104
    • /
    • 2009
  • 현재 오이에 등록되어 사용되고 있는 neonicotinoid계 살충제 dinotefuran과 thiacloprid를 시설재배 오이에 살포하여 생물학적 소실곡선식을 통한 수확 전 약제 살포 후 경과일수별 잔류량을 예측하였다. Dinotefuran의 검출한계는 0.01 mg/kg이고 thiacloprid의 검출한계는 0.005 mg/kg 이었다. 두 시험농약의 회수율은 dinotefuran과 thiacloprid에서 각각 85.78-89.52%와 85.71-95.31% 이었다. 회귀곡선식을 이용한 시험농약의 반감기는 dinotefuran의 경우 기준량 배량에서 모두 2.8일 이었고, thiacloprid의 경우 기준량 배량에서 각각 1,8일과 1.5일 이었다. 두 시험약제 초기 잔류량은 모두 잔류허용기준 이상이었으나 수확예정일의 시험농약의 잔류량은 모두 잔류허용기준 미만이었으며, 수확예정일의 잔류량으로 산출한 시험농약의 1일섭취허용량 대비 식이섭취량 비율은 모두 0.1% 미만이었다.

Residual Analysis of Insecticides (Lambda-cyhalothrin, Lufenuron, Thiamethoxam and Clothianidin) in Pomegranate Using GC-μECD or HPLC-UVD

  • Hem, Lina;Park, Jong-Hyouk;Shim, Jae-Han
    • 한국환경농학회지
    • /
    • 제29권3호
    • /
    • pp.257-265
    • /
    • 2010
  • In this study, the residual levels of four insecticidal compounds (lambda-cyhalothrin, lufenuron, thiamethoxam, and clothianidin) were monitored in the pomegranate, in order to assess the risk to consumers posed by the presence of such residues. The insecticides were applied at the recommended dose rates onto pomegranate trees. The samples were then collected at harvesting time after several treatments (two, three, and four treatments). After sample preparation progressed through the clean-up procedure, lufenuron, thiamethoxam, and clothianidin residues were analyzed via a HPCL-UVD, and the lambda-cyhalothrin residue was analyzed via a GC-${\mu}ECD$. The versatility of this method was evidenced by its excellent linearity (>0.9998 to 1) at broad concentration ranges. The mean recoveries evaluated from the untreated sample spiked with two different fortification levels ranged from 72.45 to 113.90%, and the repeatability (as a relative standard deviation) resulted from triplicate recovery tests was in a range from 0.80 to 11.75%. The residues of all insecticides determined from treated pomegranate samples and their LOD levels (lunfenuron, 0.01; lambda-cyhalothrin, 0.005; thiamethoxam, 0.01; clothianidin, 0.02 mg/kg) were much lower than their MRLs (0.5 mg/kg).

쑥갓 및 참나물 중 Lufenuron의 생산단계 잔류허용기준 설정을 위한 잔류 특성 연구 (Residual Characteristics of Lufenuron in Crown Daisy and Chamnamul for Establishing Pre-Harvest Residue Limit)

  • 오아연;반선우;장희라
    • 한국환경농학회지
    • /
    • 제42권1호
    • /
    • pp.21-27
    • /
    • 2023
  • Pre-harvest residue limits (PHRLs) have been proposed as criteria for a proactive role to exceed the maximum residue limit (MRL) of pesticides in agricultural products at harvest. However, PHRL numbers are significantly less than those of established MRLs. This study was performed to determine the dissipation constants and residual concentrations of lufenuron after application on crown daisy and chamnamul under green house conditions. Two residue field trials for each crown daisy and chamnamul were selected to consider a different geographical site at least 20 km far from one another. The pesticide was treated according to critical GAP. After samples were sprayed with lufenuron, they were collected at 0, 1, 3, 5, 7, 10, and 14 days and analyzed using HPLC-DAD. The mean recoveries of crown daisy and chamnamul were within the range of 70-120% with below 20% coefficient variation, which is within the acceptable limits specified by the manual of pre-harvest residue study for pesticides (MFDS, 2014). The biological half-lives in field I and field II were 7.0 and 4.6 days for crown daisy and 2.7 and 2.8 days for chamnamul, respectively. The lower bounds of 95% confidence intervals of dissipation rate constants of lufenuron in crown daisy were determined to be 0.0692 and 0.1298 for field I and field II, respectively, and in chamnamul were 0.2067 for both field I and field II. After applying lufenuron 5% EC, the lufenuron residues on crown daisy and chamnamul at the pre-harvest intervals (14 days for crown daisy and 7 days for chamnamul) were below the safe levels. The dissipation rates of lufenuron in crown daisy and chamnamul were evaluated for similarities with leafy vegetables based on a 95% confidence interval.