• Bulletin of the Korean Chemical Society
• /
• 제30권11호
• /
• pp.2669-2674
• /
• 2009

Controlled reduction of silver alkylcarbamate complexes with hydrogen gas was investigated as a facile synthetic method for high concentrations of silver nanocolloids in organic solvent. Polyvinylpyrrolidone (PVP) was used to stabilize the silver colloids obtained from the chemical reduction. To determine optimum conditions for preparation of the stable and controlled silver colloids with the narrowest particle size and distribution, a large number of experiments were carried out involving variations in the concentrations of the silver 2-ethylhexylcarbamate (Ag-EHCB) complex, PVP, and 2-propanol. The initial colloid had a mean particle diameter between 5$\sim$50 nm, as measured by transmission electron microscopy, and exhibited a sharp absorption band in the UV region with a maximum size near 420 nm. After treatment with a reducing agent, the colloids were characterized by ultraviolet-visible spectroscopy, X-ray diffraction, and high-resolution transmission electron microscopy.

• 천문학회지
• /
• 제47권6호
• /
• pp.255-258
• /
• 2014

Using sunspot number data from 270 historical stations for the period 1981-2013, we investigate their personal reduction coefficients (k) statistically. Chang & Oh (2012) perform a simulation showing that the k varies with the solar cycle. We try to verify their results using observational data. For this, a weighted mean and weighted standard deviation of monthly sunspot number are used to estimate the error from observed data. We find that the observed error (noise) is much smaller than that used in the simulation. Thus no distinct k-variation with the solar cycle is observed contrary to the simulation. In addition, the probability distribution of k is determined to be non-Gaussian with a fat-tail on the right side. This result implies that the relative sunspot number after 1981 might be overestimated since the mean value of k is less than that of the Gaussian distribution.

• Wind and Structures
• /
• 제33권6호
• /
• pp.423-435
• /
• 2021

Although existing algorithms can predict wind speed using historical observation data, for engineering feasibility, most use moment methods and probability density functions to estimate fitted parameters. However, extreme wind speed prediction accuracy for long-term return periods is not always dependent on how the optimized frequency distribution curves are obtained; long-term return periods emphasize general distribution effects rather than marginal distributions, which are closely related to potential extreme values. Moreover, there are different wind speed parent sample types; how to theoretically select the proper extreme value distribution is uncertain. The influence of different sampling time intervals has not been evaluated in the fitting process. To overcome these shortcomings, updated steps are introduced, involving parameter sensitivity analysis for different sampling time intervals. The extreme value prediction accuracy of unknown parent samples is also discussed. Probability analysis of mean wind is combined with estimation of the probability plot correlation coefficient and the maximum likelihood method; an iterative estimation algorithm is proposed. With the updated steps and comparison using a Monte Carlo simulation, a fitting policy suitable for different parent distributions is proposed; its feasibility is demonstrated in extreme wind speed evaluations at Longhua and Chuansha meteorological stations in Shanghai, China.

• Journal of Yeungnam Medical Science
• /
• 제20권2호
• /
• pp.177-186
• /
• 2003

교통사고의 증가로 심한 경골 고평부 골절이 점진적으로 증가되는 양상이며, 경골 고평부 골절 후 동반손상의 적절한 치료, 해부학적 정복 및 견고한 고정, 조기 관절운동이 좋은 예후를 보이며 외상성 관절염을 줄일 수 있을 것으로 사료된다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.836-840
• /
• 2006

Design optimization of layered plates bonding process is conducted to achieve high product quality by considering uncertainties in a manufacturing process. During the cooling process of the sequential sub-processes, different thermal expansion coefficients lead to residual stress and displacement. thus resulting in defects on the surface of the adherent. So robust process optimization is performed to minimize the residual stress mean and variation of the assembly while constraining the distortion as well as the instantaneous maximum stress to the allowable limits. In robust process optimization, the dimension reduction (DR) method is employed to quantify both reliability and quality of the layered plate bonding. Using this method. the average and standard deviation is estimated. Response surface is constructed using the statistical data obtained by the DRM for robust objectives and constraints. from which the optimum solution is obtained.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.229-230
• /
• 2007

카메라 시스템에서 일반적인 Noise Reduction방법은 Noise간에 서로 Correlation이 없고 Independent한 White Noise이며, Zero Mean Noise라는 가정 하에 설계된 것이다. 본 논문에서는, 실제 Non-zero Mean Noise 현상을 규명하고, 이에 의해 발생한 Low Level Signal의 Boost-up 및 High Level Signal의 Drag-down을 Correction하여 화질을 개선하기 위한 방안을 제안한다.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제20권11호
• /
• pp.573-578
• /
• 2014

자기 공명 영상에서 흔히 발생하는 잡음을 없애기 위해 비 지역적 평균과 유도 영상 필터링을 이용하는 새로운 방법을 제안한다. 제안된 방법은 두 가지 단계로 구성되어 있다. 첫 단계에서는 비 지역적 평균 필터를 이용하여 잡음 영상으로부터 유도 영상 구하는데, 필터의 커널을 적응적으로 제어하기 위해 경계도(edgeness) 개념을 사용하였다. 두 번째 단계에서는 유도 영상 필터링으로 잡음을 제거하는 과정으로 원래의 잡음 영상과 앞 단계에서 구한 유도 영상을 이용하여 잡음이 제거된 영상을 복원한다. 제안된 방법의 우수성을 확인하기 위해 다양한 표준 자기 공명 영상 데이터를 이용하여 실험을 하였는데, 실험 결과 제안된 방법이 기존의 방법들에 비해 우수한 성능을 나타내는 것을 확인할 수 있었다.

• 전자공학회논문지B
• /
• 제29B권2호
• /
• pp.18-26
• /
• 1992

MR(Model Reduction) is presented in order to estimate the frequency of multiple sinusoids from the finite noisy data with the white or colored noises. MR, using the reduced rank models, is designed, appling the approximation of linear system to LP(Linear Prediction). The MR method is analyzed. Monte-carlo simulations are conducted for MR and Lp. The results are compared with in terms of mean, root-mean square and relative bias. MR eliminates effectevely the extremeous and exceptional poles appearing in LP and improves the accuracy of LP. Especially, MR gives promising results in short noisy measurements, low SNR's and colored noises. Power spectral density and angular frequency position are showed by figures, for examples. Finally, the new method is utilized to the communication and biomedical systems estimating the characteristics of the signal and the system identification modelling the dynamic systems from experimental data.

• 대한전기학회논문지
• /
• 제36권8호
• /
• pp.584-593
• /
• 1987

A new combined approximation method using Routh stability array and mean-square error (MSE) method is proposed for deriving reduced-order z-transter functions for discrete time systems. The Routh stability array is used to obtain the reduced-order denominator polynomial, and the numerator polynomial is obtained by minimizing the mean-square error between the unit step responses of the original system and reduced model. The advantages of the new combined approximation method are that the reduced model is always stable provided the original model is stable and the initial and steady-state characteristics of the original model can be preserved in the reduced model.

• 응용통계연구
• /
• 제35권5호
• /
• pp.657-666
• /
• 2022

정보적 설명 변수 공간은 일반적인 충분차원축소 방법들이 요구하는 가정들이 만족하지 않을 때 중심부분공간을 추정하기 위해 유용하다. 최근 Ko와 Yoo (2022)는 다변량 회귀에서 Li 등 (2008)이 제시한 투영-재표본 방법론을 사용하여 정보적 설명 변수 공간이 아닌 투영-재표본 정보적 설명 변수 공간을 새로이 정의하였다. 이 공간은 기존의 정보적 설명 변수 공간에 포함되지만 중심 부분 공간을 포함한다. 본 논문에서는 다변량 회귀에서 정보적 설명 변수 공간을 직접적으로 추정할 수 있는 방법을 제안하고, 이를 Ko와 Yoo (2022)가 제시한 방법과 이론적으로 그리고 모의실험을 통해 비교하고자 한다. 모의실험에 따르면 Ko-Yoo 방법론이 본 논문에서 제시한 추정 방법보다 더 정확하게 중심 부분 공간을 추정하고, 추정값들의 변동이 적다는 측면에서 보다 더 효율적임을 알 수 있다.