• Design & Manufacturing
• /
• 제11권2호
• /
• pp.1-8
• /
• 2017

In this study, we applied microcellular foaming injection molding process to improve the performance of system air-conditioner drain fan which had been produced by injection molding process and studied the optimization of process conditions through 6-sigma process and response surface method (RSM) to reduce weight and deformation of products. Additive type, melt temperature, mold temperature, and injection screw shape were selected as the factor affecting the weight and deformation of the products by carrying out analysis of trivial many through ANOVA and design of experiment (DOE) method. Among the effect factor, we set the addictive type to Long G/F and screw shape to foaming screw which had the highest level of weight reduction and deformation reduction. The amount of foaming agent gas was set at 60 ml, which was the limit beyond which the weight of product did not decrease any more. For melt temperature and mold temperature, we studied the conditions where both weight and deformation were minimized using the RSM. As a result, we set the melt temperature to $250^{\circ}C$, fixed mold temperature to $20^{\circ}C$, and moving mold temperature to $40^{\circ}C$. The improvement effect was analyzed by appling the selected optimal conditions to the production process using the microcellular foaming injection molding. The results showed that the mean weight of product was measured to be 1,420g which was 19% lower than that measured in the current process. The standard deviations of the weights were found to be similar to those in the current process and it showed a low dispersion. The mean deformation was measured to be 0.9237mm, which represented a 57% reduction compared to the mean deformation in the current process, and the standard deviation decreased from 0.3298mm to 0.1398mm. Moreover, we analyzed the process capability for deformation, and the results showed that the short-term process capability increased from 2.73 to 6.60 which was even higher than targeted level of 6.0.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.551-554
• /
• 2005

The method of the reduction of the automotive induction noise can be classified by the method of passive control and the method of active control. However, the passive control method has a demerit to reduce the effect of noise reduction at low frequency (below 500Hz) range and to be limited by a space of the engine room. Whereas, the active control method can overcome the demerit of passive control method. The algorithm of active control is mostly used the LMS (Least-Mean-Square) algorithm because the LMS algorithm can easily obtain the complex transfer function in real-time. Especially, When the Filtered-X LMS (FXLMS) algorithm is applied to an ANC system. However, the convergence performance of LMS algorithm goes bad when the FXLMS algorithm is applied to an active control of the induction noise under rapidly accelerated driving conditions. Thus Normalized FXLMS algorithm was developed to improve the control performance under the rapid acceleration. The advantage of Normalized FXLMS algorithm is that the step size is no longer constant. Instead, it varies with time. But there is one additional practical difficulty that can arise when a nonstationary input is used. If the input is zero for consecutive samples, then the step size becomes unbounded. So, in order to solve this problem. the Correlation FXLMS algorithm was developed. The Correlation FXLMS algorithm is realized by using an estimate of the cross correlation between the adaptation error and the filtered input signal to control the step size. In this paper, the performance of the Correlation FXLMS Is presented in comparison with that of the other FXLMS algorithms based on computer simulations.

• 한국자기학회지
• /
• 제26권3호
• /
• pp.81-85
• /
• 2016

본 논문에서는 제작공차에 의해 전기기기 및 소자 관련 제품에서 발생하는 성능함수의 변동특성을 예측하기 위해서 성능 모멘트 적분법을 도입하였다. 성능함수의 확률론적 분포특성을 판단할 수 있는 평균과 분산을 효율적으로 계산하기 위해서 정규분포로 변환된 성능함수 공간과 혼합형 평균치 기법을 채용하였다. 제안된 기법의 수치적인 효율성과 정밀도를 검증하기 위해서 간단한 수학예제와 스피커 모델에 적용하여 예측된 성능함수의 확률분포 특성을 차원감소법과 몬테카를로 수치모사법의 결과와 비교하였다.

• Archives of Plastic Surgery
• /
• 제41권5호
• /
• pp.520-528
• /
• 2014

Background As the breast cancer incidence has increased, breast-conserving surgery has replaced total mastectomy as the predominant procedure. However, centrally located breast cancers pose significant challenges to successful breast-conserving surgeries. Therefore, we performed partial mastectomy and oncoplastic procedures on centrally located breast cancer as a means of partial breast reconstruction. The authors examined and evaluated the functional and aesthetic usefulness of this reconstruction method. Methods From January 2007 to June 2011, 35 patients with centrally located breast cancers who underwent various oncoplastic procedures based on the breast size and resection volume. The oncoplastic procedures performed included volume displacement surgical techniques such as purse-string suture, linear suture, and reduction mammaplasty. Other oncoplastic procedures included volume replacement procedures with an adipofascial, thoracoepigastric, intercostal artery perforator, thoracodorsal artery perforator, or latissimus dorsi flap. Results Mean patient age was 49 years, and mean follow-up period was 11 months. In cases of small to moderate-sized breasts and resection volumes <50 g, volume displacement procedures were performed. In cases of resection volumes >50 g, volume replacement procedures were performed. In cases of larger breasts and smaller resection volumes, glandular reshaping was performed. Finally, in cases of larger breasts and larger resection volumes, reduction mammaplasty was performed. This reconstruction method also elicits a high patient satisfaction rate with no significant complications. Conclusions In centrally located breast cancer, oncoplastic surgery considering breast size and resection volume is safe and provides appropriate aesthetic outcomes. Therefore, our method is advisable for breast cancer patients who elect to conserve their breasts and retain a natural breast shape.

• 한국환경과학회지
• /
• 제27권7호
• /
• pp.499-507
• /
• 2018

Agricultural meteorological information is an important resource that affects farmers' income, food security, and agricultural conditions. Thus, such data are used in various fields that are responsible for planning, enforcing, and evaluating agricultural policies. The meteorological information obtained from automatic weather observation systems operated by rural development agencies contains missing values owing to temporary mechanical or communication deficiencies. It is known that missing values lead to reduction in the reliability and validity of the model. In this study, the hierarchical Bayesian spatio-temporal model suggests replacements for missing values because the meteorological information includes spatio-temporal correlation. The prior distribution is very important in the Bayesian approach. However, we found a problem where the spatial decay parameter was not converged through the trace plot. A suitable spatial decay parameter, estimated on the bias of root-mean-square error (RMSE), which was determined to be the difference between the predicted and observed values. The latitude, longitude, and altitude were considered as covariates. The estimated spatial decay parameters were 0.041 and 0.039, for the spatio-temporal model with latitude and longitude and for latitude, longitude, and altitude, respectively. The posterior distributions were stable after the spatial decay parameter was fixed. root mean square error (RMSE), mean absolute error (MAE), mean absolute percentage error (MAPE), and bias were calculated for model validation. Finally, the missing values were generated using the independent Gaussian process model.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2003년도 추계학술대회 논문집
• /
• pp.31-34
• /
• 2003

The near wake behind a sinusoidal cylinder has been investigated quantitatively using hot-wire anemometer and qualitative. The mean velocity and turbulence intensity were measured in streamwise and spanwise direction. The results show that the wake in the saddle plane has a longer vortex formation region and rapid reversed flow than that in nodal plane. The elongated vortex formation region of sinusoidal cylinder is related with drag reduction. In addition, the flow visualized with particle tracing method support the flow characteristics of sinusoidal cylinder measured by hot-wire.

• Journal of Power Electronics
• /
• 제6권4호
• /
• pp.290-297
• /
• 2006

Various methods have been discussed to reduce detent force in a tubular permanent magnet type linear single phase AC generator. In particular, the proposed methods depend on variations of the permanent magnet construction. These methods include two approaches in the form of sloped magnets, and conical magnets in addition to the conventional method of optimizing the magnet length. The undesired detent force ripples were calculated by a two dimensional Finite Element Method (FEM). Moreover, the generated electromotive force in the stator coils was calculated for each configuration of the permanent magnet. The experimental results agreed well with those obtained from the FEM-based simulations. Sufficient reduction in the detent force was achieved over the range of 40% while the root mean square of the output voltage was maintained. It was found that sloping the permanent magnet decreased the detent force and at the same time increased the generated rms voltage of the AC generator. The performance of the designed linear AC generator was evaluated in terms of its efficiency, total weight, losses, and power to weight ratio.

• 한국통신학회논문지
• /
• 제32권4C호
• /
• pp.418-424
• /
• 2007

본 논문에서는 null 부반송파를 갖는 OFDM 시스템에서 단순화된 시간 영역 채널 추적(tracking) 방식을 제안하였다. 제안된 채널 추적 방식은 결정 귀환된 데이터를 이용하여 간단한 주파수 영역 채널 추정을 먼저 수행함으로써 시간 영역 채널 추정을 간략화한 방식이다. 제안된 방식은 기존의 시간영역 채널 추정 방식 보다 계산량 면에서 약 93% 정도 감소한다. 본 논문에서 성능 분석은 추정된 채널 응답의 MSE 성능과 수신기의 BER 성능면에서 이루어졌다. 시뮬레이션 결과 제안된 방식은 줄어든 계산량에도 불구하고 기존의 시간 영역 채널 추적 방식과 동일한 성능을 보였다.

• 대한치과기공학회지
• /
• 제41권2호
• /
• pp.81-86
• /
• 2019

Purpose: The purpose of the present study was to compare the internal fit of two different temporary restorations fabricated by dental CAD/CAM system and to evaluate clinical effectiveness. Methods: Composite resin tooth of the maxillary first molar was prepared as occlusal reduction(2.0mm), axial reduction(1mm offset), vertical angle(6 degree) and chamfer margin for a temporary crown and duplicated epoxy die was fabricated. The epoxy dies were used to fabricate provisional restorations by CAD/CAM milling technique or 3D-printing technique. The inner data from all crowns were superimposed on the master die file in the 'best-fit alignment' method using 3D analysis software. Statistical analysis was performed using a Wilcoxon's rank sum test for differences between groups. Results: It showed that the internal RMS(Root Mean Square) values of the additive group were significantly larger than those of other group. No significant differences in internal discrepancies were observed in the temporary crowns among the 2 groups with different manufacturing method. Conclusion: All the groups had the internal fit within the clinical acceptable range (< $50{\mu}m$). The continuous research in the future to be applied clinically for the adaptation of additive manufacturing technique are needed.

• Clinics in Shoulder and Elbow
• /
• 제13권2호
• /
• pp.194-201
• /
• 2010

목적: 오구 쇄골 인대를 봉합하지 않고 견봉 쇄골 관절의 관혈적 정복만 시행한 환자군에서의 임상적, 방사선학적 추시 결과를 확인하고자 하였다. 대상 및 방법: 1998년부터 2007년까지 변형 Phemister 술식과 갈고리 금속판 (AO hook 금속판, Wolter 금속판)을 사용하여 견봉 쇄골 관절 탈구로 수술 받은 환자 중 삽입물 제거한 53예를 대상으로 하였다. 변형 Phemister 술식을 사용한 군이 21명, 갈고리 금속판을 사용한 군이 32명 이였다. 임상적 평가는 Constant score를 이용하였으며, 양측 쇄골과 오구돌기 사이의 수직 거리를 비교하여 방사선적 평가를 하였다. 결과: Constant score는 변형 Phemister 술식을 사용한 군에서는 $87.59{\pm}7.8$, 갈고리 금속판을 사용한 군에서는 $89.35{\pm}5.3$로 통계학적 차이는 없었다. 두 군에서 수술 전 손상 부위의 쇄골 오구돌기의 평균 거리는 15.9 mm이였으며, 건측 견관절은 평균 8.0 mm이였다. 갈고리 금속판 환자군에서 건측과 비교하여 평균 1.0 mm, 변형 Phemister 환자군에서는 평균 1.2 mm의 수직 전위가 관찰되었으며 통계학적 차이는 없었다. 결론: 오구쇄골 인대를 복원 하지 않은 견봉 쇄골 관절 탈구의 관혈적 정복술 및 내고정술은 양호한 임상적, 방사선학적 결과를 보였다.