• Current Optics and Photonics
• /
• v.1 no.3
• /
• pp.233-238
• /
• 2017

In this paper we propose a freeform secondary lens for an LED fishing/working lamp (LFWL). This innovative LED lamp is used to replace the traditional HID fishing lamp, to satisfy the lighting demands of fishing and the on-board activities on fishing boats. To realize the freeform lens's geometry, Gaussian decomposition is involved in our optics-design process for approaching the targeted light intensity distribution curve (LIDC) of the LFWL lens. The simulated results show that the illumination on the deck, on the sea's surface, and underwater shows only small differences between LED fishing/working lamps and HID fishing lamps. Meanwhile, a lighting efficiency of 91% with just one third of the power consumption can be achieved, when the proposed LED fishing/working lamps are used instead of HID fishing lamps.

• Journal of Korean Society of Rural Planning
• /
• v.8 no.2 s.16
• /
• pp.3-16
• /
• 2002

의사결장지원시스템은 다양한 분야에 적용되어 왔으며, 그 중 수자원 및 수질 관련 분야에도 다각적으로 적용되어 왔다. 본 연구에서는 미 농무성의 자연자원보전국(NRCS, Natural Resources Conservation Service)에서 개발한 유출곡선법(Curve Number Method)과 EMC(Event Mean Concentration)을 사용한 L-THIA(Long-Term Hydrologic Impact Assessment) 수문/수질 모형을 강우자료 데이터베이스, 웹기반 지리정보시스템, 웹 사용자 편의 시스템과 통합한 수문/수질 L-THIA web 의사결정지원시스템을 개발하였다. L-THIA web은 도시계획가나 지방자치단체, 또는 지방의 공동체가 사용할 수 있도록 쉽고 단순한 사용자 편의 시스템을 제공하고 있으며, 미국의 50개 본토의 주와 카운티(County) 이름으로 기상자료와 수문토양분류(Hydrologic Soil Group)을 인터넷 지리정보시스템을 이용하여 제공하고 있다. 본 연구는 지방자치단체 및 지역공동체의 실무자를 사용자로 수문/수질 평가 및 관리를 위한 시스템으로 유용하게 활용될 수 있을 것으로 사료된다.

• Korean Journal of Veterinary Service
• /
• v.21 no.3
• /
• pp.261-266
• /
• 1998

A method for the determination of noboviocin in milk was presented by high performance liquid chromatography(HPLC). The novobiocin in the spiked sample was extracted with methanol and evaporated under vacuum. After evaporating, the residue was mixed with distilled water for 2$m\ell$, filtrates with 0.45$\mu\textrm{m}$ acrodisc was injected into HPLC. The results obtained were as follows ; 1. The calibration curve of novobiocin was showed constantly linear(r 0.999) in the range of 100~500ng/$m\ell$. 2. The mean recovery rate of novobiocin from the spiked milk sample were 88~98%. 3. The coefficients of variation were 2.6~5.8% 4. The lowest detectable limit of novobiocin was 25ppb.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.44.4-45
• /
• 2017

We report the first detection of RR Lyrae variable stars in the Crater II dwarf galaxy, a recently discovered ultra-faint satellite of the Milky Way. Based on B, V time series photometry obtained with the Korea Microlensing Telescope Network (KMTNet) at CTIO, Chile, we have identified ~45 fundamental-mode (ab-type) and ~2 first-overtone (c-type) RR Lyrae stars by adopting template light-curve fitting method. Our preliminary analysis suggests an Oosterhoff-intermediate classification of this galaxy from the mean period of the RRab stars, <$P_{ab}$> ${\simeq}0.63$ days, and the location of them on the period-amplitude diagram. We discuss the properties of the RR Lyare stars in this galaxy.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.5
• /
• pp.621-627
• /
• 1999

This paper presents Raman scattering of liquid water to obtain the characteristics with variation of temperature. Very clear Stokes-Raman signals were observed, which shows H-O vibration stretching and H-O-H vibration bending. The obtained spectrum were processed by FFT filter to extract the noise and base. The spectral shape of the H-O stretching provided a various sensitive signature which allowed temperature to be determined by a curve-fitting technique. Those are Maximum Intensity, Maximum Wave Length, FWHM(Full Width at Half Maximum), PMCR(Polymer Monomer Concentration Ratio) and TSIR(Temperature Sensitive Intensity Ratio). TSIR method shows the highest accuracy of $0.1^{\circ}C$ in mean error and $0.32^{\circ}C$ In maximum error.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.517-524
• /
• 2005

An aerodynamic design for centrifugal compressor which was applied to medium speed diesel engine has done. First of all, exact compressor specifications must be defined by accurate engine system matching. This matching program has been developed. Using the mean1ine prediction method, geometric design and performance curve for compressor was done and verified by comparing three dimensional viscous CFD results. The deviation at the design point was about 2.3%. Combustor has been designed and manufactured for the performance test of medium speed diesel engine turbocharger. Fuel nozzle of combustor was designed and performed by PIV and PDPA test equipment. Through these results, spray characteristics were studied and flow coefficient equation was deduced.

• Journal of Pharmaceutical Investigation
• /
• v.17 no.4
• /
• pp.183-188
• /
• 1987

A new cephalosporin derivative, cefoperazone phthalidyl ester, were synthesized and investigated in terms of dissolution and absorption properties. In comparison with cefoperazone, its phthalidyl ester showed the following characteristics. The mean dissolution time and variance of retention time were more significantly prolonged in simulated intestinal fluid than those in simulated gastric fluid. After a single oral dosing of both cefoperazone and its ester to rabbits, serum concentrations of cefoperazone were measured by bioassay, and the results showed that the ester exhibited much higher and more sustained blood level than the parent drug. The total area under the curve of cefoperazone phthalidyl ester were 10.8 times greater than that of cefoperazone.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.10
• /
• pp.87-93
• /
• 1999

To propose a useful modelling method for an actual muffler, the noise attenuation effects of muffler was investigated according to the flow condition and the hole shape of tubes. In this work, the finite element method was used to calculate the transmission loss of muffler, The noise attenuation characteristics of four different types of muffler in the hole shape of tubes were compared mutually to find a more simple equivalent model. Analytical results showed that the overall value of transmission loss increases and the peaks of transmission loss curve shift to the low frequency with mean flow for the given muffler, Also the noise attenuation characteristics of the equivalent model having the split holes is almost the same as those of the actual muffler having many circular holes.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.4
• /
• pp.181-190
• /
• 2004

The interest of the fatigue life of rubber components such as engine mounts is increasing according to the extension of warranty period of the automotive components. Automotive engine mounts get damaged due to thermal and mechanical loadings. This paper discusses a fatigue life prediction of the 3-dimensional dumbbell specimens for natural rubber compound considering the effects of maximum strain and heat aging temperature. Displacement controlled fatigue life tests were performed using specimens with different levels of maximum strain and various hardness. The basic mechanical properties test and the fatigue test of aged rubber specimen under normal and elevated temperature were executed. A procedure to predicted the fatigue life of vulcanized natural rubber material based on the maximum strain method was proposed, and then this curve was in good agreement with fatigue test data less than 200% error range.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.131-133
• /
• 2014

Vibration exposure of the KTX and ITX-saemaeulho on the Gyung-Bu line was evaluated and compared in terms of human health based on ISO 2631. RMS value of KTX was calculated as much lower than ITX-saemaeulho in all travel sections. When VDV result of the two trains drived return travel from Seoul to Busan in single day is compared on the health guidance caution zone of ISO 2631, vibration exposure of KTX is safer than ITX-saemaeulho which is marginally under the caution line.