• Journal of Biosystems Engineering
• /
• v.32 no.6
• /
• pp.395-402
• /
• 2007

This study was carried out as basic researches to develop the leaf vegetable harvester. This study was conducted to investigate physical and rheological properties of bundled leaf vegetables with stem (Chinese leek, Crown daisy and Chamnamul) as test materials held and picked-up by a machine. Stress-strain behavior, stress relaxation, and strain recovery for the bundled materials were analyzed using simple Maxwell model. Physical and rheological properties of the materials were investigated by measuring rupture load, deformation and stress experimentally. Also, strain recovery time when unloading was measured using super high speed camera. Recorded recovery time for stress-strain behavior was0.026 s for Chinese leek with liner strain recovery, 0.046 s for Crown daisy and 0.05 s for Chamnamul with non-linear strain recovery. Furthermore, the strain recovery time for permanent deformation was 0.026 s, 0.046 s, and 0.05 s for Chinese Leek, Crown daisy and Chamnamul, respectively. Finally, strain recovery time and strain recovery ratio for the test materials were 0.17 s, 60.4% in Chinese leek, 0.12 s, 55.3% in Crown daisy, 0.15 s, 58.7% in Chamnamul. Here strain recovery time means that how fast the test materials are recovered from initial deformation and strain recovery ratio means how much the test materials are recovered from initial deformation. The above results show that the test materials can be held enough and moved by the belts.

• Journal of the Korean Society of Visualization
• /
• v.10 no.1
• /
• pp.40-46
• /
• 2012

Recently micro shock tube is extensively being used in many diverse fields of engineering applications but the detailed flow physics involved in it is hardly known due to high Knudsen number and strong compressibility effects. Unlike the macro shock tube, the surface area to volume ratio for a micro shock tube is very large. This unique effect brings many complexities into the flow physics that makes the micro shock tube different compared with the macro shock tube. In micro shock tube, the inter- molecular forces of working gas can play an important role in specifying the flow characteristics of the unsteady shock wave flow which is essentially generated in all kinds of shock tubes. In the present study, a CFD method was used to predict and visualize the unsteady shock wave flows using the unsteady compressible Navier-Stokes equations, furnished with the no-slip and slip wall boundary conditions. Maxwell's slip equations were used to mathematically model the shock movement at high Knudsen number. The present CFD results show that the propagation speed of the shock wave is directly proportional to the initial pressure and diameter of micro shock tube.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.443-443
• /
• 2009

Cogging Torque is induced by the magnetic attraction between the rotor mounted permanent magnet(PM) and the stator teeth. This torque is an unwanted effect causing shaft vibration, noises, metal fatigues and increased stator length. A variety of techniques exist to reduce the cogging torque of PM generator. Even though the cogging torque can be vanished by skewing the stator slots by one slot pitch or rotor magnets, manufacturing cost becomes high due to the complicated structure and increased material costs. This paper introduces a new cogging torque reduction technique for PM generators that adjusts the azimuthal positions of the magnets along the circumference. A 900 kW class PMSG model is simulated using a three dimensional finite element method and the resulting cogging torques is analyzed using the Maxwell tensor stress tensor. Using the 3D simulation, the end contribution of the cogging torque is accurately calculated.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.5
• /
• pp.19-26
• /
• 2000

In this paper, to improve the mechanical response of the Moving Magnet Type LDM, the design of the LDM was optimized to achieve a large force to volume ratio without reduction the force. The model of the LDM and its optimization procedure were developed on the initial assumption that the magnetic circuit is linear. To analyze the magnetic flux distribution throughout the volume of the LDM and the slider back iron, a 2D finite element analysis of the LDM was performed.

• Journal of the Korean Home Economics Association
• /
• v.28 no.4
• /
• pp.41-50
• /
• 1990

Soy protein was isolated from Korean soy bean 'Chang ryub' and chemically modified with succinic anhydride. Functionality of the soy protein isolate(SPI), succinylated SPI(SPPI), and PP590(commercial) at various pH were investigated. The mechanical and sensory properties of soy bean curds made from several mixing ratio of succinylated soy bean milk were observed. The solubility of SPI significantly increased with succinylation. The solubility of PP590 was lower than that of SSPI. The solubility of SPPI increased significantly in 0.03M CaCl2 solution. The emulsifying activity of SSPI increased. On the range of pH above pI the emulsifying activity of PP590 was higher than that of SPI. There was no difference in emulsion stability among the groups. The foam expansion capacity of SPPI increased at higher pH than pI but the foam stability decreased significantly above pH 9. Mechanical texture profile analysis revealed the modified soy bean curds had the lower hardniss, chewiness and cohesiveness with increased modification. The mechanical characteristics of modified soy bean curds revealed generalized Maxwell Model of 7-elements or 5-elements. In sensory evaluation, the hardness, the springiness and acceptability of modified soy bean curds were lower significantly than those of control soy bean curd.

• 전기의세계
• /
• v.25 no.1
• /
• pp.95-100
• /
• 1976

The main purpose of this paper is to study on the transient current due to the change of environmental temperature under no external field in the arrangement of M$_{1}$(metal)-P(polyver)-M$_{2}$(metal). The specimer of polymeric insulator sandwiched by two metal electrodes composes a parallel-plate condenser represented by Maxwell-model. The behaviors of short circuit current flowing in M-P-M arrangement are very complex and the analysis of its conduction mechanism appears to be much complicated. In this paper we can suggest that a contact potential difference as an energetic state exists in the thin film specimen both sides of which are contacted by two different metals having different cook functions. Futhermore the contact potential difference appears to be constant through the course of temperature change, however, the dielectric constant and caparitance of the specimen must be temperature dependent. Accordingly the charge difference induced on both sides of electrodes may be a cause for the shory circuited transient current flowing through the external circuit. It is also suggestive that the results of the observation must be considered in cases of insulation design of electrical machines and D.C. cable for high voltage use.

• Journal of Magnetics
• /
• v.20 no.1
• /
• pp.79-85
• /
• 2015

This paper presents a comparative study of a Tubular Linear Machine (TLM) with an Axially Magnetized Single-sided Permanent Magnet (AMSPM) and an Axially Magnetized Double-sided Permanent Magnet (AMDPM) based on analytical field calculations. Using a two-dimensional (2-D) polar coordinate system and a magnetic vector potential, analytical solutions for the flux density produced by the stator windings are derived. This technique is significant for the design and control implementation of electromagnetic machines. The field solution is obtained by solving Maxwell's equations in the simplified boundary value problem consisting of the air gap and coil. These analytical solutions are then used to estimate the self and mutual inductances. Two different types of machine are used to verify the validity of these model simplifications, and the analytical results are compared to results obtained using the finite element method (FEM) and experimental measurement.

• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1657-1663
• /
• 2022

This study uses data from 1970 to 2016 to analyze the effect of nuclear energy use on CO₂ emissions and attempts to validate the EKC hypothesis using the Fourier Autoregressive Distributive Lag model in India for the first time. Because of India's rapidly rising population, the environment is being severely strained. However, with 22 operational nuclear reactors, India boasts tremendous nuclear energy potential to cut down on CO₂ emissions. The EKC is validated in India as the significant coefficients of GDP and GDP.² The short-run estimates also suggest that most environmental externalities are corrected within a year. Given the findings, some policy recommendations abound. The negative statistically significant coefficient of nuclear energy consumption is an indication that nuclear power expansion is essential to achieving clean and sustainable growth as a policy goal. Also, policymakers should enact new environmental laws that support the expansion and responsible use of nuclear energy as it is cleaner than fossil fuels and reduces the cost and over-dependence on oil, which ultimately leads to higher economic growth in the long run. Future research should consider studying the nonlinearities in the nuclear energy-CO₂ emissions nexus as the current study is examined in the linear sense.

• Steel and Composite Structures
• /
• v.46 no.6
• /
• pp.805-821
• /
• 2023

This study developed an evaluation system to explore the effect of the environmental temperature on the stress redistribution produced by cable stress relaxation of structural members in a steel cable-stayed bridge. The generalized Maxwell model is used to estimate stress relaxation at different temperatures. The environmental temperature is represented using the thermal coefficients and temperature loads. The fmincon optimization function is used to determine the set of stress relaxation parameters at different temperatures for all cables. The ABAQUS software is employed to investigate the stress redistribution of the steel cable-stayed bridge caused by the cable stress relaxation and the environmental temperature. All of these steps are set up as an evaluation system to save time and ensure the accuracy of the study results. The developed evaluation system is then employed to investigate the effect of environmental temperature and cable type on stress redistribution. These studies' findings show that as environmental temperatures increased up to 40 ℃, the redistribution rate increased by up to 34.9% in some girders. The results also show that the cable type with low relaxation rates should be used in high environmental temperature areas to minimize the effect of cable stress relaxation.

• Steel and Composite Structures
• /
• v.44 no.6
• /
• pp.753-768
• /
• 2022

In this study, a graphical automatic system is developed in order to investigate the stress redistribution of structural members in a steel cable-stayed bridge. The generalized Maxwell model is selected for stress relaxation estimation, and it is carefully verified and applied to all the cable members of a steel cable-stayed bridge to investigate its stress relaxation. A set of stress relaxation parameters in all cables is determined using the fmincon optimization function. The stress redistribution of the steel cable-stayed bridge is then analyzed using ABAQUS. To shorten the investigation time, all the aforementioned phases are built up to be an automatic system. The automatic system is then employed to investigate the effect of cable cross-section areas and girder spans on stress redistribution. The findings from these studies show that the initial tension in the cables of a steel cable-stayed bridge should be kept to less than 55% of the cable's ultimate strength to reduce the effect of cable stress relaxation. The cable space in a steel cable-stayed bridge should be limited to 15,000 mm to minimize the effect of cable stress relaxation. In comparison to other structural members of a steel cable-stayed bridge, the girders experience a significant stress redistribution.