• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.4
• /
• pp.294-302
• /
• 2019

As a series of fundamental researches on the development of an automatic identification monitoring system for fishing gear. Firstly, the study on the installation method of automated identification buoy for the coastal improvement net fishing net with many loss problems on the west coast was carried out. Secondly, the study was conducted find out how to install an automatic identification buoy for coastal gill net which has the highest loss rate among the fisheries. GPS for fishing was used six times in the coastal waters around Seogwipo city in Jeju Island to determine the developmental status and underwater behavior to conduct a field survey. Next, a questionnaire was administered in parallel on the type of loss and the quantity and location of fishing gear to be developed and the water transmitter. In the field experiment, the data collection was possible from a minimum of 13 hours, ten minutes to a maximum of 20 hours and ten minutes using GPS, identifying the development status and underwater behavior of the coastal gillnet fishing gear. The result of the survey showed that the loss of coastal net fishing gear was in the following order: net (27.3%), full fishing gear (24.2%), buoys, and anchors (18.2%). The causes were active algae (50.0%), fish catches (33.3%) and natural disasters (12.5%). To solve this problem, the installation method is to attach one and two electronic buoys to top of each end of the fishing gear, and one underwater transmitter at both ends of the float line connected to the anchor. By identifying and managing abnormal conditions such as damage or loss of fishing gear due to external factors such as potent algae and cutting of fishing gear, loss of fishing gear can be reduced. If the lost fishing gear is found, it will be efficiently collected.

• Korean Journal of Environmental Biology
• /
• v.17 no.3
• /
• pp.263-270
• /
• 1999

In order to identify the morphological changes of tissues in mouse after irradiation. We have observed the redistribution of LDH isozymes and the morphological changes of skeletal muscle, heart, kidney, liver and testis in mouse according to variation amount with the time after the 1 Gray and 3 Gray irradiation each. As a result of H-E (hematoxylin-eosin) stain, the apoptotic bodies were more easily observed in the liver than the other tissues and the quantity of the apoptotic bodies was proportionated to radiation amount. The number of apoptotic bodies was shown the highest at 1 day in most tissues and at 7 day in testis after irradiation. TUNEL (terminal deoxyribonucleodtidyl transferase-mediated dUTP-digoxigenin nick end labeling) staining was shown the same results as H-E staining. After the irradiation, the protein content was reduced in tissues except kidney. And protein content was reduced in all tissues at the initial period of 2 hours after 3 Gy irradiation. But it increased at 7 days after irradiation. LDH (EC 1.1.1.27, lactate dehydrogenase) activity was increased mostly in tissues at the early stage after 1 Gy irradiation. The maximum activity was detected earlier stage after 1 Gy irradiation than 3 Gy irradiation. The activity of LDH $A_4$ isozyme was decreased in the skeletal muscle, heart, kidney, and testis. The activity of $B_4$ and $A_2$$B_2$ sozyme was increased in the skeletal muscle and heart, and the activity of heterotetramer isozyme was increased in kidney The activity of $A_4$ isozyme in liver was detected high level and the activity of isozyme including subunit C elevated in testis. Therefore, LDH isozyme seems to play a role of lactate oxidase in most tissues except liver after irradiation. These data support that LDH isozyme is predomintly involved in the aerobic metabolism.

• Journal of Energy Engineering
• /
• v.10 no.3
• /
• pp.223-232
• /
• 2001

To study the stabilization characteristics of diffusion flame formed in the wake of a cylindrical bluff body with fuel injection, the flame stability limits, length and temperature of recirculation zone of flame, turbulence intensity distribution near the recirculation zone of flame were measured and analyzed. The length of recirculation zone is independent on main fuel injection quantity, but it is dependent on fuel injection angles, air stream velocity, and auxiliary fuel injection into recirculation zone. For diffusion flame, in general, the flame stabilization is deteriorated with increase of he length of recirculation zone, but if the turbulence generator is installed, the flame stabilization is improved with increase of the length of recirculation zone. The temperature of recirculation zone is dependent on fuel injection angles, auxiliary fuel injection into recirculation zone, turbulence generators, and it dependent on fuel injection angles, auxiliary fuel injection into recirculation zone, turbulence generators, and it has a maximum value at the condition of each theoretical mixture. In general, the more temperature of recirculation zone is low, the more flame is stable. But when the turbulence generator is installed, the more temperature of recirculation zone is low, the more flame is unstable. The turbulence intensity in the wake of bluff body is increased with increase of diameter or blockage ratio of grid. The more turbulence intensity is increased by installation of turbulence generator, the more flame is unstable. Finally, It is clear that the stabilization characteristics of diffuser flame can be controlled by some parameters such as fuel injection angles, auxiliary fuel injection into recirculation zone, turbulence generators.

• The Korean Journal of Pharmacology
• /
• v.32 no.2
• /
• pp.243-257
• /
• 1996

CCK and cholinergic agonist stimulate enzyme release from the pancreatic acini via G-protein-mediated activation of phospholipase C, In contrast secretin and related peptides increase the level of cAMP and activate cAMP-dependent protein kinase. Camostat, a synthetic protease inhibitor, causes pancreatic hypertrophy and hyperplasia by increasing the CCK release. In this study, the secretagogue-induced changes of intracellular proteins were examined in the dispersed pancreatic acini of rats with or without camostat treatment. Camostat(FOY-305, 200 mg/kg, p.o.) was given for 4 days twice daily and the dispersed acini were prepared at 12 bouts after last treatment. The profiles of Intracellular phosphoproteins were analyzed by two-dimensional gel electrophoresis after incubating the acini with $^{32}P$. The amylase release from the dispersed acini was measured. The pancreatic weight was increased to 126% of control, while amylase activity per mg acinar protein decreased to 41% of control, The maximum response of amylase release from dispersed acini to CCK-8 or carbachol was markedly decreased(65% or 46% of control, respectively). The group of intracellular proteins(24 kD, pI $4.5{\sim}8.5$) was increased in quantity by camostat. CCK-8 or secretin increased phosphorylation of a protein(34 kD, pI 4.7) in camostat-treated as well as control rats. CCK-8 increased tyrosine phosphoryiation in the acini of control rats. However, in camostat-treated rats, the basal level of tyrosine phosphorylation was increased and it was rather decreased by CCK-8. Secretin had no effect on the level of tyrosine phosphorylation in acini. These results indicate that both phospholipase C and adenylate cyclase induce phosphorylation of an intracellular acinar protein(34 kD, pI 4.7) and camostat treatment increases the basal level of tyrosine phosphorylation in acinar cells. And these results suggest that not only serine/threonine protein kinase but also protein tyrosine kinase/phosphatase are involved in the process of CCK receptor mediated stimulation-secrelion coupling.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.7
• /
• pp.884-891
• /
• 2016

A secondary injection system in a diesel engine has benefits: it can be controlled independently without interrupting engine control, it can be adapted to various layouts for exhaust systems, and it pose no reductant dilution problems compared to post injection systems in the combustion chamber or other supplemental reductant injections. In a secondary injection system, the efficiency of the catalyst depends on the method of reducing the supply. The reductant needs to be maintained and optimized with constant pressure, the positions and angles of injector is a very important factor. The concentration and amount of reductant can be changed by adjusting secondary injection conditions. However, secondary injection is highly dependent upon the type of injector, injection pressure, atomization, spray technology, etc. Therefore, it is necessary to establish injection conditions the spray characteristics must be well-understood, such as spray penetration, sauter mean diameter, spray angle, injection quantity, etc. Uniform distribution of the reductant corresponding to the maximum NOx reduction in the DeNOx catalyst system must also assured. With this goal in mind, the spray characteristics and impingement plate types of a secondary injector were analyzed using visualization and digital image processing techniques.

• Korean Chemical Engineering Research
• /
• v.57 no.5
• /
• pp.743-748
• /
• 2019

This study focuses on the simulation of wet flue gas desulfurization process for improving the production of gypsum by the utilization of low-grade limestone. At present, high-grade limestone with a $CaCO_3$ content of 94% is used for producing merchantable gypsum. In modeling process, a lot of reactions are considered to develop model. First, the limestone dissolution is simulated by RSTOIC model. Second, SOx absorption and crystallization is used by RCSTR model. Finally the gypsum is separated by using SEPERATORS model. Modeling steps make it easy to reflect further side reactions and physical disturbances. In optimization condition, constraints are set to 93% purity of gypsum, 94% desulfurization efficiency, and total use of limestone at 3710 kg/hr. Under these constraints, the mass flow of low-grade limestone was maximized. As a result, the maximum blending quantity of low-grade limestone for 2,100 kg of high-grade limestone that satisfies constraints is about 1,610 kg.

• Journal of Mushroom
• /
• v.17 no.1
• /
• pp.12-18
• /
• 2019

An auxin-producing bacterium Yangsong-1 was isolated from a button mushroom bed in Chung cheongnam-do. The strain Yangsong-1 was classified as a novel strain of Arthrobacter enclensis based on a chemotaxonomic and phylogenetic analysis. The isolated A. enclensis Yangsong-1 was confirmed to produce indole-3-acetic acid (IAA), which is one of the auxin hormones. When the concentration of IAA was assessed by HPLC quantity analysis, the maximum concentration of IAA, $152.903mg\;L^{-1}$, was detected from the culture broth incubated in R2A medium containing 0.2% L-tryptophan for 48 h at $35^{\circ}C$. A negative relationship between IAA production and pH was estimated to show that the increase in IAA caused pH acidification of the culture. The effect of the supplement on L-tryptophan, a known precursor of IAA production, appeared to be at maximal production at 0.2% concentration and was rather reduced at concentration above 0.4%. To investigate the growth-promoting effects on the crops, the culture broth of A. enclensis Yangsong-1 was placed in water cultures and seed pots of mung beans and lettuce. In consequence, the adventitious root induction and root growth of mung beans and lettuce were 1.5 and 1.9 times higher, respectively, than those of the control.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.23 no.1
• /
• pp.54-58
• /
• 2019

Purpose At now, there are many kind of dedicated heart SPECT machine in clinical nuclear medicine. Among those, the fixed focusing type SPECT can make a good quality, quantity image because a detectors of this SPECT arranged forward a special ROI and didn't rotate around of body. So, in this paper, we will evaluate a spatial uniformity about resolution and sensitivity at a same plane of a fixed focusing type SPECT. Materials and Methods We used D-SPECT as a fixed focusing type SPECT and Cario MD as a rotated parallel type SPECT to comparing each other. We injected $^{99m}Tc(14.8MBq/1cc)$ to 10 capillary tube (diameter=1mm), and we set those line sources a tfield of view of each SPECT. And then we acquired SPECT date, we applied are construction by recommended methods. By using two tomography images, we calculated a full width of half maximum as a resolution and total counts as a sensitivity, and we compared a CV (coefficientofvariation) values between two images as a spatial uniformity. Results In case of D-SPECT, a CV of resolution and sensitivity are 7.45%, 12.34%. In case of Cario MD, an CV of resolution and sensitivity are 12.49%, 21.84% Conclusion As a results, CV of resolution and sensitivity of a fixed focusing type SPECT is 67.75%, 77.00% higher than ones of a rotated parallel type SPECT. It means that a fixed focusing type SPECT is more uniformed, because this new SPECT can reduce a motion blur artifact by rotating detector around body, also all of detector that made by semiconductor arrange forward a special FOV like heart.

• Journal of Korea Water Resources Association
• /
• v.55 no.11
• /
• pp.941-953
• /
• 2022

In this study, monthly water use data were collected for 5 years from the 65 local governments included in the Han-river basin and a typical water usage ratios and patterns were calculated. The difference in water shortage was compared by considering the water usage patterns using the water balance and budget analysis model (MODSIM) and data base. As a result, it was confirmed that the change occurred in the range of -3.120% to +4.322% compared to the monthly constant ratio by period. In addition, when applying the patterns in the water balance model, 17 of the 28 middle watershed showed changes in the quantity of water shortage and the domestic and industrial water shortage would decrease about 8.0% during the maximum drought period. If it is applied in conjunction with predictive research on water usage patterns reflecting climate change, social and regional characteristics in the future, it will be possible to establish a more realistic water supply forecasts and a reliable national water resources plan.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.5
• /
• pp.393-402
• /
• 1990

Studies to obtain a fundamental data to improve the quantity and quality of wheat protein and to select the excellent breeding materials suitable for various uses of it were performed on the focuses of protein content, amino acid composition, and its related quality. The range of seed protein content of crossing block consisted with 319 varieties or lines was from 9.9% to 17.6% with the average of 13.2%. The minimum protein content was showed by Wonkwang, and the maximum by Chungnamjaerae and Suwon 210. Among the Korean native varieties or breeding lines of crossing block, at least twelve lines or varieties were selected as the high-protein wheats. In the effects of environmental conditions, the variations of protein content by cultivating locations and year were showed out to be up to 3.6%, and 3.3%, respectively. But the varietal characteristics of wheat protein were seemed to remain constantly. In the results of amino acid analysis, those related with bread quality, except proline were improved with the increase of seed protein. But the improvement of nutritional quality did not agree with the protein content increase of seed. The total content of amino acid essential to adults was very low with 266.6-273.3mg per one gram of protein compare to the 350mg (free from the amino acid of tryptophan) recommended by FAO/WHO. Especially the limiting amino acid such as methionine, lysine and threonine were critically deficient. The correlation between protein contents and sedimentation values was obtained r=0.656$\^$**/ of average notwithstanding widly different environmental conditions, and in some condition the value was obained about to r=0.956$\^$**/.