• Journal of Power Electronics
• /
• 제12권3호
• /
• pp.503-508
• /
• 2012

Tracking the Maximum Power Point (MPP) of a photovoltaic (PV) array is usually an essential part of a PV system. The problem addressed by Maximum Power Point Tracking (MPPT) techniques is to find the voltage $V_{MPP}$ or current $I_{MPP}$ at which a PV array should operate to generate the maximum power output $P_{MPP}$ under a given temperature and irradiance. MPPT control methods such as the perturb and observe method and the incremental conductance method require a microprocessor or DSP to determine if the duty cycle should be increased or not. This paper proposes a simple and fast analog MPPT method. The proposed control scheme tracks the MPP very quickly and its hardware implementation is simple when compared with the conventional techniques. The new algorithm can successfully track the MPP even in the case of rapidly changing atmospheric conditions. In addition, it has higher efficiency than ordinary algorithms.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권6호
• /
• pp.454-461
• /
• 2016

A maximum power point tracking (MPPT) system with fast-tracked time and high power efficiency is presented in this paper. The proposed MPPT system uses an unbounded binary search (UBS) algorithm that continuously tracks the maximum power point (MPP) with a binary system to follow the MPP under rapid-weather-change conditions. The proposed algorithm can decide the correct direction of the MPPT system while comparing the previous power point with the present power point. And then, by fixing the MPP until finding the next MPP, there is no oscillation of voltage MPP, which maximizes the overall power efficiency of the photovoltaic module. With these advantages, this proposed UBS is able to detect the MPP more effectively. This MPPT system is based on a boost converter with a micro-control unit to control analog-to-digital converters and pulse width modulation. Analysis of this work and experimental results show that the proposed UBS MPPT provides fast, accurate tracking with no oscillation in situations where weather rapidly changes and shadow is caused by all sorts of things. The tracking time is reduced by 87.3% and 66.1% under dynamic-state and steady-state operation, respectively, as compared with the conventional 7-bit perturb and observe technique.

• 전력전자학회논문지
• /
• 제14권2호
• /
• pp.89-95
• /
• 2009

태양광발전시스템에서 태양전지의 최대전력점 추적(MPPT, Maximum Power Point Tracking)은 중요한 부분이다. MPPT 알고리즘은 태양전지가 주어진 일사량 및 온도에 의해 최대전력점에서 동작할 수 있도록 전압($V_{MPP}$), 전류($I_{MPP}$)를 찾는다. 기존의 P&O, IncCond 알고리즘은 듀티를 증가 혹은 감소시키기 위하여 마이크로 프로세서나 DSP를 필요로 한다. 본 논문에서는 간단하면서 빠른 아날로그 MPPT 알고리즘을 제안한다. 이 방식은 기존 방식과 비교해서 매우 빠르게 MPP를 추적할 수 있으며 구현하기 쉽다. 또한 급격히 변하는 일사량에 기존 방식보다 대처가 빠르며 높은 효율을 보여준다.

• 전력전자학회논문지
• /
• 제25권1호
• /
• pp.29-36
• /
• 2020

In this study, a variable step algorithm is proposed on the basis of the perturb and observe method. The proposed algorithm can follow the maximum power point (MPP) quickly when solar irradiance changes rapidly. The proposed technique uses the voltage change characteristic at the MPP when the environment changes because of insolation or temperature. The MPP is tracked through the voltage control using a variable step method. This method determines the sudden change of solar irradiance by setting the threshold value and operates in fast tracking mode to track the MPP rapidly. When the operation point reaches the MPP, the mode switches to the variable step mode to minimize the steady state error. In addition, the output disturbance is decreased through the optimization of the control method design. The performance of the proposed MPPT algorithm is verified through simulation and experiment.

• 전력전자학회논문지
• /
• 제24권1호
• /
• pp.1-8
• /
• 2019

In this study, a maximum power point tracking (MPPT) algorithm based on the perturb and observe (P&O) method with variable step size is proposed to improve the dynamic response characteristic of MPPT, using the existing P&O method. The proposed algorithm, which we verified by simulation and experiment, can track the maximum power point (MPP) through duty control and consisted of three operation modes, namely, constant voltage mode, fast mode, and variable step mode. When the insolation is constant, the voltage variation of the operating point at the MPP is reduced through the step size reduction of the duty in the variable step mode. Consequently, the vibration of the operating point is reduced, and the power generation efficiency is increased. When the insolation changes, the duty and the photovoltaic (PV) voltage are kept constant through the constant voltage mode. The operating point then rapidly tracks the new MPP through the fast-mode operation at the end of the insolation change. When the MPP is reached, the operation is changed to the variable step mode to reduce the duty step size and track the MPP. The validity of the proposed algorithm is verified by simulation and experiment of a PV system composed of a PV panel and a boost converter.

• 한국정보통신학회논문지
• /
• 제16권3호
• /
• pp.549-557
• /
• 2012

본 논문에서는 CMOS 공정의 p-diff/n-well 다이오드만을 사용한 ISC(Integrated Solar Cell)를 이용하여 MPPT(Maximum Power Point Tracking) 제어 기능을 갖는 온칩 빛에너지 하베스팅 시스템을 제안하였다. MPPT 제어는 PV(Photovoltaic) 셀의 개방전압과 MPP(Maximum Power Point) 전압간의 비례관계를 이용하여, 작은 pilot PV 셀로 하여금 main PV 셀의 MPP를 실시간 추적할 수 있도록 설계하였다. 모의실험 결과 설계된 회로는 MPPT 제어기능을 적용했을 때 부하가 큰 경우에도 MPP 근처의 전압을 부하에 공급함으로써 부하에 연결된 회로가 정상적으로 동작하는 것을 확인하였다. 제안된 회로는 0.18um CMOS 공정으로 설계하였으며, main PV 셀과 pilot PV 셀의 면적은 각각 $8mm^2$와 $0.4mm^2$이다.

• 한국항행학회논문지
• /
• 제24권4호
• /
• pp.291-298
• /
• 2020

본 연구는 입자 무리 최적화 (PSO; particle swarm optimization) 알고리즘을 이용하여 기존의 MPPT 알고리즘보다 신속하게 MPP를 추적할 수 있는 모델을 제안하였다. 제안 모델은 PSO 알고리즘에서 gbest 및 pbest의 가속 상수를 높게 설정하여 신속하게 MPP 지점을 추적하고 이로 인한 전력 불안정 문제점을 제거하였다. 또한, 일사량의 급격한 변화에 따른 태양광 패널의 전력 변화를 감지하여 알고리즘을 다시 실행하였다. 실험결과, 일사량이 691.5W/m2에 대해서 MPPT 시간이 0.03초와 전력이 131.65로서 기존의 P&O와 INC 알고리즘보다 높은 전력과 빠른 속도로 MPP를 추적하였으며, 일사량 변화에 따라 신속하게 MPP를 추적하였다. 제안 모델은 태양광 패널이 병렬로 연결되어 있는 태양광 발전소에서 부분적인 음영에 의해 전력량의 변화를 감지하였을 경우에도 적용할 수 있다. 본 연구는 MPPT 알고리즘을 개선하기 위해 MFO (moth flame optimization) 및 WOA (whale optimization algorithm)와 같은 최적화 알고리즘에 대한 비교 연구가 필요하다.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.769-780
• /
• 2018

This paper presents an analysis of the power gain under partial shading conditions (PSC) when the partial shade loss is being compensated in photovoltaic(PV) system. To analyze the power gain, our study divides the mismatch loss into partial shade loss and operating point loss. Partial shade loss is defined as the power difference between a normal string and a partially shaded string at the maximum power point (MPP). Operating point loss is defined as the power loss due to the operating point shift while following the MPP of the PV array. Partial shading in a PV system affects the maximum power point tracking (MPPT) control by creating multiple MPPs, which causes mismatch losses. Several MPPT algorithms have been suggested to solve the multiple MPP problems. Among these, mismatch compensation algorithms require additional power to compensate for the mismatch loss; however, these algorithms do not consider the gain or loss between the input power required for compensation and the increased output power obtained after compensation. This paper analyzes the power gain resulting from the partial shade loss compensation under PSC, using the V-P curve of the PV system, and verifies that power gain existence by simulation and experiment.

• Journal of Power Electronics
• /
• 제11권2호
• /
• pp.218-227
• /
• 2011

The subject of variable step size maximum power point tracking (MPPT) algorithms has been addressed in the literature. However, most of the addressed algorithms tune the variable step size according to two variables: the photovoltaic (PV) array voltage ($V_{PV}$) and the PV array current ($I_{PV}$). Therefore, both the PV array current and voltage have to be measured. Recently, maximum power point trackers that arc based on a single variable ($I_{PV}$ or $V_{PV}$) have received a great deal of attention due to their simplicity and ease of implementation, when compared to other tracking techniques. In this paper, two methods have been proposed to design a variable step size MPPT algorithm using only a single current sensor for stand-alone battery storage PV systems. These methods utilize only the relationship between the PV array measured current and the converter duty cycle (D) to automatically adapt the step change in the duty cycle to reach the maximum power point (MPP) of the PV array. Detailed analyses and flowcharts of the proposed methods are included. Moreover, a comparison has been made between the proposed methods to investigate their performance in the transient and steady states. Finally, experimental results with field programmable gate arrays (FPGAs) are presented to verify the performance of the proposed methods.

• Journal of Power Electronics
• /
• 제15권6호
• /
• pp.1584-1592
• /
• 2015

This paper presents a nonlinear method to control a DC-DC converter and track the Maximum Power Point (MPP) of a Photovoltaic (PV) system. A backstepping controller is proposed to regulate the voltage at the input of a buck-boost converter by means of Lyapunov functions. To make the control initially faster and avoid local maximum, a regression plane is used to estimate the reference voltages that must be obtained to achieve the MPP and guarantee the maximum power extraction, modifying the conventional Perturb and Observe (P&O) method. An experimental platform has been designed to verify the validity and performance of the proposed control method. In this platform, a buck-boost converter has been built to extract the maximum power of commercial solar modules under different environmental conditions.