• Fisheries and Aquatic Sciences
• /
• 제8권4호
• /
• pp.220-227
• /
• 2005

The estrogenic phenolic compounds, nonylphenol (NP), octylphenol(OP), bisphenol A (BPA) and nonylphenol mono- and diethoxylate ($NP_{1-2}EO$) were analyzed in 24 surface water samples from six rivers flowing into Masan Bay. All of the phenolic compounds were detected in all six rivers in high concentrations. The most abundant compound was $NP_{1-2}EO$ (86.0%), followed by NP ($10.1 \%$), BPA ($3.6\%$) and OP ($0.3\%$). The levels of phenolic compounds were 1.42-22.70 ${\mu}g$/L for $NP_{1-2}EO$, 0.15-1.68 ${\mu}g$/L for NP, 0.024-0.610 ${\mu}g$/L for BPA and 0.003-0.067 ${\mu}g$/L for OP. Especially, high concentrations were recorded in the rivers that pass through industrial complexes. The concentrations of phenolic compounds observed in these river waters were 1-2 orders of magnitude lower than the reported acute toxicity levels (hundreds of micrograms per liter). However, they were only slightly lower than the chronic toxicity levels. Most of the water samples also exceeded the Canadian nonylphenolic compounds water quality guideline, 1 ${\mu}g$/L, for the protection of aquatic life and the maximum permissible concentrations (MPC), 0.33 ${\mu}g$/L for NP and 0.12 ${\mu}g$/L for $NP_{1-2}EO$.

• 대한화학회지
• /
• 제13권2호
• /
• pp.181-186
• /
• 1969

The concentration of Strontium-90 in liquid whole milk produced in Korea were measured during past four years. The samples of milk were purchased from dairies in Seoul. Strontium-90 was analysed radiochemically and the amount of stable calcium was also determined. Radioactivity of Yttrium-90 was counted in low background beta counter which has the background of 1.38 cpm. The concentrations of Strontium-90 in the milk are 25.1 PCi $^{90}Sr$/g.Ca in 1965, 26.8 PCi $^{90}Sr$/g. Ca in 1966, 13.7 PCi 90Sr/g.Ca in 1967 and 18.2 PCi $^{90}Sr$/g.Ca in 1968 in annual average. The concentrations of Strontium-90 in the milk of 1967 and of 1968 were decreased approximately compared with the values of 60% 1965 and 1966. From the results we can see that Strontium-90 concentrations in the milk vary roughly proportionally with the specific activity of fallout. Considering on the safety problems, the Strontium-90 levels in the milk produced in Korea were far below the maximum permissible level recommended by ICRP.

• 한국식품과학회지
• /
• 제20권1호
• /
• pp.23-27
• /
• 1988

Bacillus subtilis의 생육 억제에 미치는 보존료의 병용효과 및 식염과의 상승효과를 조사하기 위하여 tryptone glucose-yeast extract 액체배지에 potassium sorbate와 sodiun bnzoate를 각각 최고허용농도의 1/2인 0.1%, 0.03%로 처리하고 이에 미생물의 내염성 기준도인 2% 식염을 첨가하여 진탕배양(4시간) 또는 정치배양 (4일)하면서 생육 상태를 조사한 결과, 두 보존료의 상승효과가 정치 및 진탕배양에서 모두 나타나지 않았으나 potassium sorbate와 식염의 병용처리구에서는 상승효과가 현저하게 나타났다.

• 한국산업보건학회지
• /
• 제18권1호
• /
• pp.32-40
• /
• 2008

Methyl bromide has been used as a representative fumigant for quarantine, and several poisoning cases have occurred recently by this chemical in Korea. The purpose of this study is to evaluate workers' exposures to airborne methyl bromide in the importing and exporting plant products quarantine companies. Air samples were collected 400/200 mg Anasorb 747TM and were analyzed by gas chromatograph /flame ionization detector according to the Occupational Safety and Health Agency (OSHA) Method PV2040. Geometric mean (GM) and arithmetic mean (AM) of total 27 workers' exposure concentrations to airborne methyl bromide were 1.12 ppm and 0.24 ppm, respectively. Two exposures(12.1 ppm and 12 ppm as 8hr-TWA) of total 27 workers' exposures exceeded the Korean standard (5 ppm) of Ministry Labor, while 4 exposures (15%) exceeded the Threshold Limit Value (TLV) (1 ppm) of American Conference of Governmental Industrial Hygienists (ACGIH). Seven samples (11%) of total 63 short-term air samples exceeded the OSHA Permissible Exposure Limit (PEL) 20 ppm (Ceiling). The opening (management) task in wood fumigation by tent showed the highest short-term exposure concentrations (AM: 18.6 ppm, GM: 0.58 ppm, maximum: 340.7 ppm). The maximum level in treatment task of the same process was 2.01 ppm. Methyl bromide concentrations in opening operation was significantly higher than that in treatment operation (p<0.05). In conclusion, the GM of workers' 8hr-TWA exposures to airborne methyl chloride in the importing/exporting plant quarantine industry was estimated below the ACGIH TLV (1 ppm). However, opening task in the fumigation of wood being covered with tent or fumigation of pant products in container showed the levels exceeding ACGIH TLV (1 ppm), and opening task in the fumigation of wood being covered with tent showed the level exceeding the Korean standard of Ministry of Labor (5 ppm).

• Advances in concrete construction
• /
• 제3권4호
• /
• pp.253-268
• /
• 2015

This paper investigates the influence of various mix design parameters on the characteristics of concrete containing recycled coarse aggregates and Nano-Silica using Taguchi method. The present study adopts Water-cement ratio, Recycled Coarse Aggregate (%), Maximum cement content and Nano-Silica (%) as factors with each one having three different levels. Using the above mentioned control parameters with levels an Orthogonal Array (OA) matrix experiments of L9 (34) has selected and nine number of concrete mixes has been prepared. Compressive Strength, Split Tensile Strength, Flexural Tensile Strength, Modulus of Elasticity and Non-Destructive parameters are selected as responses. Experimental results are analyzed and the optimum level for each response is predicted. Analysis of 28 days CS depicts that NS (%) is the most significant factor among all factors. Analysis of the tensile strength results indicates that the effect of control factor W/C ratio is ranked one and then NS (%) is ranked two which suggests that W/C ratio and NS (%) have more influence as compared to other two factors. However, the factor that affects the modulus of elasticity most is found to be RCA (%). Finally, validation experiments have been carried out with the optimal mixture of concrete with Nano-Silica for the desired engineering properties of recycled aggregate concrete. Moreover, the comparative study of the predicted and experimental results concludes that errors between both experimental and predicted values are within the permissible limits. This present study highlights the application of Taguchi method as an efficient tool in determining the effects of constituent materials in mix proportioning of concrete.

• 대한핵의학회지
• /
• 제37권2호
• /
• pp.110-119
• /
• 2003

목적: 분화갑상선암 환자에 대한 방사성옥소(I-131) 치료는 재발율과 사망률을 감소시키는 효과적인 치료법이지만, 치료용량을 증가시킴으로써 치료율을 향상시킬 수 있는지에 대해서는 아직 논란이 있다. 본 연구에서는 최대허용선량 치료법의 효용성을 검증하고자 하였다. 대상 및 방법: 임상적 병기가 제3, 4병기이고, 6개월 이후에 I-131 전신스캔(이하 IWBS)과 혈중 thyroglobulin (이하 Tg), anti-thyroglobulin antibody (이하 ATA), 초음파검사(이하 US) 및 F-18 FDG PET 등을 통해 치료여부를 확인할 수 있었던 58명(남:여=9:49, 평균연령 $50{\pm}11$세)의 유두상갑상선암 환자를 대상으로 하였다. 이중 11명은 제4병기, 47명은 제3병기였으며, 43명(남:여=4:39, 평균연령 $50{\pm}11$세)은 7.4 GBq 이하의 고식적인 저용량치료법으로 치료하였고, 9.25 GBq 이상의 고용량 치료를 받은 환자는 15명(남:여=5:10, 평균연령 $50{\pm}12$세)으로 고용량군에서 남자가 더 많았으나 연령의 차이는 없었다. 고용량군 환자 모두에서 추적용량의 방사성옥소(평균 $77{\pm}3MBq$)를 경구 투여한 후 혈중 방사능소실곡선을 통해 최대허용선량(maximum permissible dose, 이하 MPD)을 계산하였으며, 7명에서는 말초혈액림프구의 중기염색 체분석법에 의해 생물학적으로 MPD를 계산하였다. 14명에서는 치료용량의 방사성옥소를 투여한 후 혈중 방사능소실곡선을 통해 MPD를 계산하였다. 완전치유(complete response, 이하 CR)는 IWBS에서 병소가 없어지고, 혈중 Tg치가 1 ng/mL 이하로 감소한 경우로 정의하였으며, 부분치유(partial response, 이하 PR)는 IWBS에서 병소가 없어졌더라도 혈중 Tg, ATA치가 높거나, US 또는 PET 검사에서 병소가 남아있는 경우로 정의하였다. 치료후 IWBS에서 병소가 오히려 증가하거나 변함없는 경우는 없었다. 방사성옥소 치료에 의한 부작용은 입원기간 중 타액선이 현저하게 붓고 통증이 있거나, 구토를 심하게 하는 경우, 그리고 퇴원후 1개월째 백혈구수가 20% 이상 감소한 경우로 정의하였다. 결과: 양 군간에 연속적인 수치변화를 비교하는 경우는 paired t-test를 이용하였으며, 대상군간 치료효과와 부작용의 비교는 chi-square test를 이용하였다. p값 0.05 미만을 통계적으로 유의한 차이로 인정하였다. 고용량군 환자 모두에서 추적용량과 치료용량의 방사성옥소 투여 후 혈액의 피폭선량은 각각 $0.012{\pm}0.3Gy,\;1.66{\pm}25Gy$였으며, 방사성옥소 투여 후 혈액에 전달되는 피폭선량은 추적용량보다 치료용량에서 더 많았고(1.21: 166 rad, p<0.0001), 방사성옥소 1 mCi당 혈액에 전달되는 피폭선량은 차이가 없었다($0.58{\pm}0.1\;vs.\;0.56{\pm}0.1$ rad/37 MBq, p=0.34). 추적용량 방사성옥소 투여 후 구한 MPD는 평균 $13.3{\pm}1.9GBq\;(9.7{\sim}16GBq)$ 이였고, 치료용량 방사성옥소 투여 후 구한 MPD는 평균 $13.8{\pm}2.1GBq(10.4{\sim}16.3GBq)$로 유의한 차이가 얻었으며 (p=0.20), 두 수치간에는 유의한 상관 관계가 있었다(r=0.8, p<0.0001). 7명의 환자에서 말초혈액림프구 중기염색체 분석법으로 MPD를 측정하였는데 혈액의 피폭선량은 $1.78{\pm}0.03Gy$였으며, 같은 환자에서 혈중 방사능소실곡선으로부터 구한 피폭선량은 $1.54{\pm}0.03Gy$로 유의하게 낮았으나 (p=0.01), 두 측 정치 간에는 유의한 상관관계(r=0.86, p=0.01)가 있었다. 저용량 치료군 43명 중 22명(51.2%)에서 완전치유를 보였고 21명(48.8%)에서는 부분치유를 보인 반면, 고용량 치료군 15명 중 12명(80%)에서 완전치유를 보였고 3명(20%)에서만 부분치유를 보여 고용량 치료군에서 유의하게 높은 완전치유를 얻을 수 있었다(p=0.05). 한편 부작용 발생빈도는 저용량 치료군 43명 중 13명(30.2%), 고용량 치료군 15명중 6명(40%)로 양군간에 유의한 차이가 없었다(p=0.46). 임상적인 병기, 연령 및 성별에 따라서는 치유의 차이가 없었다(모두 p>0.05). 결론: 혈중소실곡선으로부터 MPD를 결정하고 이를 토대로 환자 개개인별로 적절한 선량을 선택하여 치료하는 방법은 부작용을 최소화하면서도 치료효과를 높일 수 있는 매우 유용한 치료법이며, 고위험군 분화갑상선 암 환자에게 가장 적절한 치료법이라고 사료되었다.

• 자원환경지질
• /
• 제30권6호
• /
• pp.587-601
• /
• 1997

This study had three purposes: (1) to investigate the enrichment levels and dispersion patterns of potentially toxic elements in the rock-soil-plant system; (2) to evaluate the uptake ratios of heavy metals from soils into plants and (3) to assess the chemical speciation of heavy metals in soils. Rock, surface soil and plant samples were collected in the Boeun area underlain by black shales of the Okchon Zone. These samples were analyzed for multi-elements using INAA, ICP-AES and AAS. The maximum abundance of U in black shales is 16 mg/kg and radioactivity counts up to 300 cpm. In particular, Mo, V, Ba, Cd, Pb and U are enriched in black shales. Most of soils derived from black shales show high concentrations of U, As, Mo, Ba, Cu, Cd, Pb, Zn and mean concentrations of As and Mo in soils (20 mg/kg of As and 6.6 mg/kg of Mo) are higher than the permissible level suggested by Kloke (1979). Enrichment index values of soils are calculated and higher than 1.0 in the black shale area with the highest value of 6.4. Mean concentration of Cd in plants is higher than those of Cu, Pb and Zn. The concentration of Cd in plant species decreases in the order of Chinese cabbage > red pepper > soybean=sesame > rice stalk > com > rice grain. The biological absorption coefficients (BAC) in plants are in the order of Cd > Zn=Cu > Pb, which suggests that Cd is more bioavailable to plants than Cu, Pb and Zn. From the results of sequential extraction analysis of soils, relatively high proportion of Cu, Pb and Zn are present as residual fractions whereas that of Cd as non-residual fractions. Cadmuim occurs predominantly as exchangeable/water-acid soluble phase in soils, and Cd is more mobile and bioavailable than Cu, Pb and Zn.

• 한국식품과학회지
• /
• 제37권3호
• /
• pp.492-497
• /
• 2005

잔류농약과 관련된 포장시험 및 기준설정에는 데이터의 변이성이 뒤따르기 때문에 여러가지 허수(default value)를 채택하고 있다. 잔류농약 분석상의 오차는 $RSD\;{\pm}30-40%$에 이르고 있어 잔류허용기준(MRL)은 이것을 감안하여 geometric progression에 따르고 있다. 과거 5년간(1998-2002)의 JMPR 보고서에 의하면 포장시험에서의 변이계수(중앙치에 대한 최고치 비율)은 LOQ 이상에서의 486개 농약-작물 조합에서 평균 3.8배에 이르고 있고 기준설정시의 절상효과는 최고치의 1.5배로 나타났다. 한편 국내에서 기준설정시의 규제마진(최고잔류치에 대한 최대잔류기준의 비율)은 822개 농약-작물 조합에서 평균 4.8배로 나타났다. 이와 같은 규제마진을 적용하는 경우 국내의 잔류기준은 Codex보다 높게 설정될 것으로 예상된다. 앞으로 농약잔류 허용기준의 설정에서 Codex기준과 국내기준의 조화를 이루기 위한 검증작업이 이루어져야 할 것이다.

• 한국축산식품학회지
• /
• 제37권1호
• /
• pp.79-86
• /
• 2017

Aflatoxin $M_1$ ($AFM_1$) after its bioconversion from aflatoxin $B_1$ in animal liver becomes the part of milk while heavy metals get entry into milk and milk products during handling in the supply chain. Aflatoxin $M_1$ and heavy metals being toxic compounds are needed to be monitored continuously to avoid any ailments among consumers of foods contaminated with such toxicants. Thirteen commercially available infant formula milk (IFM) brands available in Pakistani markets were analyzed for the quantitative determination of $AFM_1$ and heavy metals through ELISA and atomic absorption spectrophotometer, respectively. $AFM_1$ was found positive in 53.84% samples while 30.76% samples were found exceeding the maximum EU limit i.e. $0.025 {\mu}g/kg$ for $AFM_1$ in IFM. Heavy metals lead (Pb) and cadmium (Cd) were found below the detection limits in any of the sample, whereas the concentrations of iron (Fe), zinc (Zn) and nickel (Ni) ranged between 45.40-97.10, 29.72-113.50 and <$0.001-50.90 {\mu}g/kg$, respectively. The concentration of Fe in all the tested brands was found in normal ranges while the concentrations of Zn and Ni were found exceeding the standard norms. Elevated levels of $AFM_1$, Zn and Ni in some of the tested IFM brands indicated that a diet completely based on these IFM brands might pose sever health implications in the most vulnerable community i.e., infants.

• 한국산업보건학회지
• /
• 제20권1호
• /
• pp.10-18
• /
• 2010

To provide necessary information for future environmental monitoring of smelting and litharge making industries in Korea, environmental monitoring dataset of air lead concentration of 4 lead industries(1 primary smelting, 2 secondary smelting and 1 litharge making industry) were analyzed from 1994 to 2007. Data were compared using geometric mean and standard deviation with minimum and maximum values according to year of measurement, type of lead industries and type of operation of lead industries. The geometric mean and standard deviation of air concentration for a total of 1140 samples in all lead industries for overall 14 years were 70.7${\mu}g/m^3$ and 5.51 with minimum of 1${\mu}g/m^3$ and maximum of 9,185 ${\mu}g/m^3$. The overall geometric means of air concentration were above the permissible exposure levels(PEL) until year of 2001 and thereafter they were remained at the level of half of PEL. The geometric means of primary smelting, secondary smelting and litharge making industry for overall 14 years were 21.7${\mu}g/m^3$(number of samples: 353), 82.5${\mu}g/m^3$(number of samples: 357) and 164.2 ${\mu}g/m^3$(number of samples: 430) respectively. In primary smelting industry, the highest geometric mean air concentration was 35.4 ${\mu}g/m^3$ in the secondary smelting operation; followed by casting operation (24.9 ${\mu}g/m^3$) and melting operation (14.9 ${\mu}g/m^3$), respectively. On the other hand, in secondary smelting industries, the highest geometric mean air concentration was 125.4${\mu}g/m^3$ in melting operation; followed by casting operation (90.5${\mu}g/m^3$) and pre-treatment operation (43.4${\mu}g/m^3$), respectively. However, in litharge making industries, there were no significant differences of geometric mean air concentrations between litharge operation and stabilizer operation. The proportion of over PEL (50${\mu}g/m^3$) was highest in litharge industry and followed by secondary smelting industries. However The proportions of over PEL(${\mu}g./m^3.$) were decreased by the years of environmental monitoring. The significant reduction of mean air lead concentration since year of 2000 was observed due to more active environmental engineering control and new introduction of new operation in manufacturing process, but may be also influenced by non-engineering method such as reduction of operation hours or reduction of exposure time during actual environmental measurement by industrial hygienist according to more strict enforcement of occupational and safety law by the government.