• Journal of Korean Society of Transportation
• /
• v.28 no.5
• /
• pp.43-54
• /
• 2010

In order to improve the existing evaluation system of bus services and gain more reasonable analysis outputs, the authors evaluate the efficiency of 113 arterial bus routes in Seoul in 2009 using a modified BCC model considering not only desirable outputs but also undesirable outputs. Each Decision Making Unit (DMU) is assumed to use inputs such as possession costs, operating costs, the ratios of median bus stops overlapped route lengths to produce estimates of desirable outputs (the number of passengers and service satisfaction score) and undesirable outputs (CO2 emissions). According to the analysis, the modified BCC model considering both desirable outputs and undesirable outputs shows more appropriate results. DMUs would be more efficient on average to reduce nearly 10% of the 3 inputs (possession costs, operating costs, and overlapped route lengths) and increase by about 160% the ratios of median bus stops. Also, a Tobit regression analysis is conducted to identify the most effective variables for maximum efficiency and discover that the variable of possession costs and the ratios of median bus stops are statistically significant.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4515-4521
• /
• 2010

A Yagi antenna, which is a typical directional antenna, has been designed and fabricated as a surveillance sensor. The proposed Yagi antenna satisfies the requirements as a surveillance sensor; impedance bandwidth of 7.2-8.2GHz, maximum gain of 7dBi, and 3dB beamwidth of $60^{\circ}$ in the azimuthal plane. The proposed Yagi antenna is designed with 3 directors and one driven element on a dielectric substrate. Also, a microstrip-to-CPS balun is designed and applied to the proposed antenna for balanced feeding of the dirven element. The performance of the proposed antenna has been verified by comparing the simulation and measurement results.

• Korean Journal of Materials Research
• /
• v.29 no.10
• /
• pp.586-591
• /
• 2019

This study describes the doping effect of $Yb_2O_3$ on microstructure, electrical and dielectric properties of $ZnO-V_2O_5-MnO_2-Nb_2O_5$ (ZVMN) ceramic semiconductors sintered at a temperature as low as $900^{\circ}C$. As the doping content of $Yb_2O_3$ increases, the ceramic density slightly increases from 5.50 to $5.54g/cm^3$; also, the average ZnO grain size is in the range of $5.3-5.6{\mu}m$. The switching voltage increases from 4,874 to 5,494 V/cm when the doping content of $Yb_2O_3$ is less than 0.1 mol%, whereas further doping decreases this value. The ZVMN ceramic semiconductors doped with 0.1 mol% $Yb_2O_3$ reveal an excellent nonohmic coefficient as high as 70. The donor density of ZnO gain increases in the range of $2.46-7.41{\times}10^{17}cm^{-3}$ with increasing doping content of $Yb_2O_3$ and the potential barrier height and surface state density at the grain boundaries exhibits a maximum value (1.25 eV) at 0.1 mol%. The dielectric constant (at 1 kHz) decreases from 592.7 to 501.4 until the doping content of $Yb_2O_3$ reaches 0.1 mol%, whereas further doping increases it. The value of $tan{\delta}$ increases from 0.209 to 0.268 with the doping content of $Yb_2O_3$.

• Korean Journal of Optics and Photonics
• /
• v.1 no.1
• /
• pp.22-27
• /
• 1990

The cavity-length detuning characteristics of the hybridly mode-locked dye laser have been studied with a collinear autocorrelator. In the optimum condition, the pulse width is 0.65 ps about three times as short as that of the synchronously mode-locked dye laser. As the cavity length is increased, the pulse width becomes broader than that at the optimum cavity length because of the effect of spontaneous emission. Also, the spectrum width becomes broad, therefore the time bandwidth product ($\Deltat\Deltav$) is increased. The peak power of autocorrelation is maximum at $\Deltat=5.0\umm$ longer than the optimum cavity length. On the other hand, as the cavity length is decreased, the pulse width becomes broader and the satellite pulses appear because of the gain recovery. Also the spectrum width becomes narrower than that at the optimum cavity length. In particular, at the mismatched cavity length the center of the lasing spectrum moves to shorter wavelengths. ngths.

• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.384-389
• /
• 2021

An optimal ground station (GS) antenna pattern design method for network-based UAV command and control communication systems considering complexity and performance is presented. The GS antenna consists of multiple side sectors and one upward sector. The antenna gain for each vertical/horizontal angle of the GS antenna according to the change of antenna design parameters such as the number of sectors, horizontal and vertical beam-width, and tilt-angle is modeled, and the effect of the parameter changes on the signal-to-noise ratio (SNR) distribution in the virtual three-dimensional space is analyzed. It is observed that the tilt-angle of the side sectors has the greatest effect on the performance, and the longer the distance between GSs, the higher the maximum altitude and the smaller the number of side sectors, the tilt-angle should be lower. In addition, it is observed that the wider vertical beam-width of the side sector is advantageous in maximizing the lowest SNR, but narrow vertical beam-width is advantageous in maximizing the average SNR.

• Animal Bioscience
• /
• v.34 no.12
• /
• pp.1987-1994
• /
• 2021

Objective: The present study aimed to evaluate the effects of varying standardized ileal digestible lysine:threonine (SID Lys:Thr) ratio in the diet on the performance and meat quality of finishing pigs. Methods: In total 192 crossbred pigs ([Landrace×Yorkshire]×Duroc, 17 weeks old), with an initial body weight (BW) of 70.6±3.9 kg were used in an 8-wk trial. Pigs were randomly allotted to one of six dietary treatments based on their initial BW and sex (8 replications; 4 pigs per pen, 2 barrows and 2 gilts). The pigs in the 6 treatments were fed diets having different SID Lys:Thr ratios such as 1:0.65, 1:0.66, 1:0.67, 1:0.68, 1:0.69, and 1:0.70. Results: A linear increment (p<0.05) in average daily gain (ADG) and trends in reduction in feed conversion ratio (FCR) were observed during day 29 to 56 of the experiment and the apparent total tract digestibility (ATTD) of dry matter tended to increase linearly (p = 0.094) at the end of the experiment (day 56) with the increase in the dietary SID Lys:Thr ratios. The backfat thickness and lean percentage increased (linear effect, p<0.05) on day 28. In addition, at day 56, a linear (p<0.05) increment in lean percentage was observed. Significant quadratic responses (p = 0.02) for pH and drip loss at day 7 (p = 0.02), a linear increase (p<0.05) in cooking loss and drip loss at day 7, and a trend in quadratic response (p = 0.07) in the lightness of meat color (L^*) were observed, whereas other meat quality indices were unaffected by varying the SID Lys:Thr ratios. Conclusion: The SID Lys:Thr ratio for maximum ADG, minimum FCR and enhanced digestibility was found to be 0.70. However, for carcass trait and meat quality, the SID Lys:Thr ratio of 0.65 was enough.

• Animal Bioscience
• /
• v.34 no.5
• /
• pp.824-832
• /
• 2021

Objective: This study aimed to estimate the genetic parameters and genetic correlations for related feed efficiency, growth, and carcass traits in Hanwoo cattle. Methods: Phenotypic data from 15,279 animals born between 1989 and 2015 were considered. The related feed efficiency traits considered were Kleiber ratio (KR) and relative growth rate (RGR). Carcass traits analyzed were backfat thickness (BT), carcass weight, eye muscle area, and marbling score. Growth traits were assessed by the average daily gain (ADG), metabolic body weight (MBW) at mid-test age from 6 to 24 months, and yearling weight (YW). Variance and covariance components were estimated using restricted maximum likelihood using nine multi-trait animal models. Results: The heritability estimates for related feed efficiency (0.28±0.04 for KR and RGR) and growth traits (0.26±0.02 to 0.33±0.04) were moderate, but the carcass traits tended to be higher (0.38±0.04 to 0.61±0.06). The related feed efficiency traits were positively genetically correlated with all the carcass traits (0.37±0.09 to 0.47±0.07 for KR, and 0.14±0.09 to 0.37±0.09 for RGR), except for BT, which showed null to weak correlation. Conversely, the genetic correlations of RGR with MBW (-0.36±0.08) and YW (-0.30±0.08) were negative, and those of KR with MBW and YW were close to zero, whereas the genetic correlations of ADG with RGR (0.40±0.08) and KR (0.70±0.05) were positive and relatively moderate to high. The genetic (0.92±0.02) correlations between KR and RGR were very high. Conclusion: Sufficient genetic variability and heritability were observed for traits of interest. Moreover, the inclusion of KR and/or RGR in Hanwoo cattle breeding programs could improve the feed efficiency without producing any unfavorable effects on the carcass traits.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.1
• /
• pp.8-11
• /
• 2019

In this paper, a Ku-band 50-W internally-matched power amplifier is designed and fabricated using a CGHV1J070D GaN HEMT from Wolfspeed. To obtain the same magnitudes and phases for the output signals of the unit transistor cells, which constitute a power transistor, a slit pattern and an asymmetric T-junction are used in the input and output matching circuits. The internally-matched power amplifier is fabricated on two different thin-film substrates with relative dielectric constants of 40 and 9.8, respectively, and is measured under pulsed conditions with a pulse period of $330{\mu}s$ and a duty cycle of 6%. The measured results show a maximum output power of 50~73 W, a drain efficiency of 35.4~46.4%, and a power gain of 4.5~6.5 dB from 16.2 to 16.8 GHz.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.425-430
• /
• 2019

This work describes the design and characterization of a X-band power amplifier (PA) monolithic microwave integrated circuit (MMIC) using a $0.25{\mu}m$ gate length gallium nitride (GaN) high electron mobility transistor (HEMT) technology. The developed X-band power amplifier MMIC has small signal gain of over 22.7 dB and saturated output power of 43.02 dBm (20.04 W) over the entire band of 9 to 10 GHz. Maximum saturated output power is a 43.84 dBm (24.21 W) at 9.5 GHz. Its power added efficiency (PAE) is 41.0~51.24% and the chip dimensions are $3.7mm{\times}2.3mm$, generating the output power density of $2.84W/mm^2$. The developed GaN power amplifier MMIC is expected to be applied in a variety of X-band radar applications.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.7
• /
• pp.930-938
• /
• 2019

Objective: Estimate genetic parameters, the rate of inbreeding, and the effect of inbreeding on growth and egg production traits of a Thai native chicken breed Lueng Hang Kao Kabinburi housed under intensive management under a tropical climate. Methods: Genetic parameters were estimated for weight measured at four weekly intervals from body weight at day 1 (BW1D) to body weight at 24 weeks (BW24) of age, as well as weight at first egg, age at first egg (AFE), egg weight at first egg, and total number of eggs (EN) produced during the first 17 weeks of lay using restricted maximum likelihood. Inbreeding depression was estimated using a linear regression of individual phenotype on inbreeding coefficient. Results: Direct additive genetic effect was significant for all traits. Maternal genetic effect and permanent environmental hen effects were significant for all early growth traits, expect for BW24. For BW24, maternal genetic effect was also significant. Permanent environmental hen effect was significant for AFE. Direct heritabilities ranged from 0.10 to 0.47 for growth traits and ranged from 0.15 to 0.16 for egg production traits. Early growth traits had high genetic correlations between them. The EN was lowly negatively correlated with other traits. The average rate of inbreeding for the population was 0.09% per year. Overall, the inbreeding had no effect on body weight traits, except for BW1D. An increase in inbreeding coefficient by 1% reduced BWID by 0.09 g (0.29% of the mean). Conclusion: Improvement in body weight gain can be achieved by selecting for early growth traits. Selection for higher body weight traits is expected to increase the weight of first egg. Due to low but unfavorable correlations with body weight traits, selection on EN needs to be combined with other traits via multi-trait index selection to improve body weight and EN simultaneously.