• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.7
• /
• pp.62-71
• /
• 1998

In this paper, we describe the object-oriented motioncompensation technique using the hierarchical grid interpolation(HGI). By noting that the HGI does not exploit effetively the rate-distortion (R-D) trade-off inherent in the quadtree decomposition, we propose an objectoriented HGI technique employing the greedy method. In the proposed technique, input image is decomposed in a quadtree basis using the greedy method, yielding maximum split gain in the R-D sense. Then, the motion compensation is performed using the HGI technique. The performance of the proposed technique is examined in simulation, and it will be show that the proposed technique provides better performance than the conventional object-oriented motion compensation techniques.

• Journal of Information Technology Applications and Management
• /
• v.25 no.2
• /
• pp.41-52
• /
• 2018

This paper presents a method for accurate camera self-calibration based on SIFT Feature Detection and image quality assessment. We performed image quality assessment to select high quality images for the camera self-calibration process. We defined high quality images as those that contain little or no blur, and have maximum contrast among images captured within a short period. The image quality assessment includes blur detection and contrast assessment. Blur detection is based on the statistical analysis of energy and standard deviation of high frequency components of the images using Discrete Cosine Transform. Contrast assessment is based on contrast measurement and selection of the high contrast images among some images captured in a short period. Experimental results show little or no distortion in the perspective view of the images. Thus, the suggested method achieves camera self-calibration accuracy of approximately 93%.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.4B no.3
• /
• pp.108-113
• /
• 2004

This paper presents methods to improve performance of the power supply system in a NASA deep space explorer. In the Stirling engine driven reciprocating Brushless DC (BLDC) generator, the accurate position information of the prime mover is important to diagnose the performance of the engine and prevent distortion of the output power. Since sensors to detect the position are fragile and unreliable, and conventional sensorless techniques have drawbacks in the low speed region, a novel sensorless position detection technique for the prime mover has been proposed and verified. Another major issue of the generator for the spacecraft is power density maximization. The mass of the power system is important to the mass of the satellite. Therefore, the components of the spacecraft should be lightweight. Conventional rectification methods cannot achieve the maximum power possible due to non-optimal current waveforms. The optimal current waveform for maximizing power density and minimizing machine size and weight in a nonsinusoidal power supply system has been derived, incorporated in a control system, and verified by simulation work.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.671-673
• /
• 2017

The maximum number of fiber spans is induced in disoersion-managed optical links with the non-midway optical phase conjugator (OPC) for the compensation of the distorted WDM signals due to the group velocity dispersion (GVD) are evaluated and compared.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.739-741
• /
• 1993

This paper deals with the Improvement of inverter output waveform with space vector modulation using the DSP-chip. The proposed scheme can be considered as a alternative of the conventional, subharmonic method. This scheme features a maximum output voltage that is 15% greater. The number of switchings is also 30% less than the one obtained by subharmonic modulation method(SHM) A performance function(PF) which is the time integral function of the inverter output voltage is introduced in this paper. An optimal PWM pattern is obtained by minimizing the distortion factor of performance function. The experiment was carried out with an TMS320C25.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.188-190
• /
• 1995

This paper describes a soft switching using discontinuous inductor current. The soft switching snubber circuit provides ZCS and ZVS for main switch. For high power applications, the input ractifier is fed from a three-phase ac source. The Conventional switching method is hard switching technics, because of the device turn off is ocurred in maximum reactor current. In this time, switching losses are maximised by the hard switching. In generally, soft switching technique has been adjusted with the snubber condenser in order to compensates for this losses. So, it was compared hard switching with soft switching which has proposed in this paper for switching losses, distortion factor by the simulation.

• Journal of Information Processing Systems
• /
• v.15 no.1
• /
• pp.22-33
• /
• 2019

This paper introduces an efficient fingerprint matching method based on multiple reference minutiae points. First, we attempt to effectively align two fingerprints by employing multiple reference minutiae points. However, the corresponding minutiae points between two fingerprints are ambiguous since a minutia of one fingerprint can be a match to any minutia of the other fingerprint. Therefore, we introduce a novel method based on linear classification concept to establish minutiae correspondences between two fingerprints. Each minutiae correspondence represents a possible alignment. For each possible alignment, a matching score is computed using minutiae and ridge orientation features and the maximum score is then selected to represent the similarity of the two fingerprints. The proposed method is evaluated using fingerprint databases, FVC2002 and FVC2004. In addition, we compare our approach with two existing methods and find that our approach outperforms them in term of matching accuracy, especially in the case of non-linear distorted fingerprints. Furthermore, the experiments show that our method provides additional advantages in low quality fingerprint images such as inaccurate position, missing minutiae, and spurious extracted minutiae.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.3
• /
• pp.241-246
• /
• 2021

Modern loudspeaker systems are changing an active loudspeaker system that have multiple input channels and power amplifier. So, we cannot measure these active loudspeakers with IEC 60268-5 standard. This paper introduces an IEC 60268-21 standard that can measure an active loudspeaker having many analog and digital and wireless or wired inputs and having various control parameters.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.1166-1169
• /
• 2011

In this paper, we design a Circle dot Code, In our scheme, we design a dot patterns for increasing maximum capacity and also for increasing robustness to Affine Transformation. Our code Can be extended according number of data circle. We use three data circle vision code. In this type code, after acquiring camera images for the Circle dot Codes, and perform error correction decoding using four position symbols and six CRC symbols. We perform graph based dot code analysis which determines the topological distance between dot pixels. Our code can be bridged the real world and ubiquitous computing environment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.763-767
• /
• 2008

In a speech coding system using excitation source of voiced and unvoiced, it would be involved a distortion of speech qualify in case coexist with a voiced and an unvoiced consonants in a frame. So, We proposed TS(Transition Segment) including unvoiced consonant searching and extraction method in order to uncoexistent with a voiced and unvoiced consonants in a frame. This research present a new method of TS approximate-synthesis by using Least Mean Square and frequency band division. As a result, this method obtain a high quality approximation-synthesis waveforms within TS by using frequency information of 0.547kHz below and 2.813kHz above. The important thing is that the maximum error signal can be made with low distortion approximation-synthesis waveform within TS. This method has the capability of being applied to a new speech coding of Voiced/Silence/TS, speech analysis and speech synthesis.