• 제목/요약/키워드: Maximum differential settlement

검색결과 30건 처리시간 0.025초

Soil-structure interaction analysis of beams resting on multilayered geosynthetic-reinforced soil

  • Deb, Kousik
    • Interaction and multiscale mechanics
    • /
    • 제5권4호
    • /
    • pp.369-383
    • /
    • 2012
  • In this paper, soil-structure interaction analysis has been presented for beams resting on multilayered geosynthetic-reinforced granular fill-soft soil system. The soft soil and geosynthetic reinforcements are idealized as nonlinear springs and elastic membranes, respectively. The governing differential equations are solved by finite difference technique and the results are presented in non-dimensional form. It is observed from the study that use of geosynthetic reinforcement is not very effective for maximum settlement reduction in case of very rigid beam. Similarly the reinforcements are not effective for shear force reduction if the granular fill has very high shear modulus value. However, multilayered reinforced system is very effective for bending moment and differential settlement reduction.

토공구간 성토체의 Wetting Collapse에 관한 연구 (Wetting-Induced Collapse in Rock Fill Materials for Embankment)

  • 이성진;이일화;임은상;신동훈
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2007년도 추계학술대회 논문집
    • /
    • pp.1287-1296
    • /
    • 2007
  • Recently, the high speed railway comes into the spotlight as the important and convenient traffic infrastructure. In Korea, Kyung-Bu high speed train service began in about 400km section at 2004, and the Ho-Nam high speed railway will be constructed by 2017. The high speed train will run with a design maximum speed of 300-350km/hr. Since the trains are operated at high speed, the differential settlement of subgrade under the rail is able to cause a fatal disaster. Therefore, the differential settlement of the embankment must be controlled with the greatest care. Furthermore, the characteristics and causes of settlements which occurred under construction and post-construction should be investigated. A considerable number of studies have been conducted on the settlement of the natural ground over the past several decades. But little attention has been given to the compression settlement of the embankment. The long-term settlement of compacted fills embankments is greatly influenced by the post-construction wetting. This is called 'hydro collapse' or 'wetting collapse'. In spite of little study for this wetting collapse problem, it has been recognized that the compressibility of compacted sands, gravels and rockfills exhibit low compressibility at low pressures, but there can be significant compression at high pressures due to grain crushing by several researchers(Marachi et al. 1969, Nobari and Duncan 1972, Noorany et al. 1994, Houston et al. 1993, Wu 2004). The characteristics of compression of fill materials depend on a number of factors such as soil/rock type, as-compacted moisture, density, stress level and wetting condition. Because of the complexity of these factors, it is not easy to predict quantitatively the amount of compression without extensive tests. Therefore, in this research I carried out the wetting collapse tests, with focusing in various soil/rock type, stress levels, wetting condition more closely.

  • PDF

Piled Raft 기초 적용사례 분석 (A Case Study of the Piled Raft Foundation)

  • 김홍택;강인규;최효범;박시삼
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2002년도 봄 학술발표회 논문집
    • /
    • pp.597-604
    • /
    • 2002
  • The piled raft foundation Is an innovative design concept to reduce both the maximum settlement and differential settlements caused by concentrated building loads and load eccentricities, and also to reduce the bending moments of the raft. The main concern given in the design of piled raft foundations is proper judgments both of relative proportions of loads carried by the raft and piles, and of the effect of the pile support on the maximum and differential settlements In the present study, the piled raft foundation used in the foundation system of Richensia Building at Youido, Seoul is introduced and is carried out analyzing the results of field tests such as plate load tests, large plate load test, pile load test, and piled raft load test.

  • PDF

Time dependent behavior of piled raft foundation in clayey soil

  • Fattah, Mohammed Y.;Al-Mosawi, Mosa J.;Al-Zayadi, Abbas A.O.
    • Geomechanics and Engineering
    • /
    • 제5권1호
    • /
    • pp.17-36
    • /
    • 2013
  • Settlement of the piled raft can be estimated even after years of completing the construction of any structure over the foundation. This study is devoted to carry out numerical analysis by the finite element method of the consolidation settlement of piled rafts over clayey soils and detecting the dissipation of excess pore water pressure and its effect on bearing capacity of piled raft foundations. The ABAQUS computer program is used as a finite element tool and the soil is represented by the modified Drucker-Prager/cap model. Five different configurations of pile groups are simulated in the finite element analysis. It was found that the settlement beneath the piled raft foundation resulted from the dissipation of excess pore water pressure considerably affects the final settlement of the foundation, and enough attention should be paid to settlement variation with time. The settlement behavior of unpiled raft shows bowl shaped settlement profile with maximum at the center. The degree of curvature of the raft under vertical load increases with the decrease of the raft thickness. For the same vertical load, the differential settlement of raft of ($10{\times}10m$) size decreases by more than 90% when the raft thickness increased from 0.75 m to 1.5 m. The average load carried by piles depends on the number of piles in the group. The groups of ($2{\times}1$, $3{\times}1$, $2{\times}2$, $3{\times}2$, and $3{\times}3$) piles were found to carry about 24%, 32%, 42%, 58%, and 79% of the total vertical load. The distribution of load between piles becomes more uniform with the increase of raft thickness.

연약지반 구간에서 지표투과레이더 활용한 교량 접속부 침하량 안전 평가 (Safety Evaluation of the Settlement Amount of the Bridge Earthwork Transition Area Using the Ground Penetrating Radar in the Soft Ground Section)

  • 정국영;조영균;김성래
    • 한국지반환경공학회 논문집
    • /
    • 제23권8호
    • /
    • pp.17-22
    • /
    • 2022
  • 공용 중에 연약지반의 침하로 발생된 교량 접속부의 단차 개선을 위해 도로관리기관에서는 지속적으로 덧씌우기를 실시하고 있다. 본 연구에서는 연약지반 내에 건설된 교량 9개소에 대해 접속부의 침하량을 추정하고자 1GHz 안테나를 차량에 탑재한 지표투과레이더 장비를 이용하였다. 포장 내부 조사가 가능한 지표투과레이더 기술로 아스팔트 도로에서 깊이 1m 수준까지 효과적으로 포장두께의 측정이 가능하였다. 노면 변형 조사결과와는 다르게, 9개 교량 접속부에서 측정된 포장두께 변화량은 최소 50mm에서 최대 600mm로 상당하였으며, 공동(空洞)의 발생 가능성도 높았다. 또한 각 교량 접속부의 부위별로는 증가된 포장두께의 차이가 50~250mm로 나타나 부등침하 위험이 존재하였다. 본 연구에서 지표투과레이더 결과에 근거하여 주행성 개선 및 침하부 유지관리 방안을 제시하였다.

도심지 터널 굴착에 따른 인접구조물의 손상평가에 관한 연구 (1) -지상 건물의 기하학적 및 위치적 특성을 중심으로- (A Study on the Safety Assessment of Adjacent Structures Caused by Tunnel Excavation in Urban Area -Focused on the Characteristics of Geometries and Locations for Nearby Building-)

  • 김창용;문현구;배규진
    • 한국지반공학회논문집
    • /
    • 제15권4호
    • /
    • pp.19-42
    • /
    • 1999
  • 도심지에 터널을 건설할 때는 설계ㆍ시공에 있어서 중요한 몇몇 고려 사항이 있다. 첫째는 특정한 지반조건과 시공조건에 대해서 지반변위의 크기와 분포를 예측하는 것이다. 두 번째는 예측된 지반거동에 상응하는 인접구조물들의 잠재적 손상을 평가하는 것이고, 셋째는 잠재적 손상이 예견되는 구조물에 대한 적절한 보강대책을 선정하는 것이다. 본 연구는 주로 첫 번째와 두 번째 단계의 문제를 해결하는데 주안점을 두고 있고 특히, 지상에 존재하는 건물의 기하학적 특성과 위치적 특성을 고려한 손상평가 방법에 연구의 초점을 두고 있다. 이를 위해서 도심지 터널 굴착 시 발생할 수 있는 지표침하 거동 예측 결과를 기반으로 예측할 수 있는 지상 건물의 손상평가 인자들(뒤틈각(angular distortion), 처짐비(deflection ratio), 건물의 최대침하량, 부등침하량, 수평변형률)을 도입하였고, 기존의 보수적인 해석 방법을 좀 더 발전시키기 위해서 지상에 존재하는 건물 벽체 각각에 대해서 분석할 수 있도록 이러한 인자들을 3차원적으로 표현할 수 있는 프로그램을 개발하였다. 또한, 건물의 기하학적, 위치적 특성 등의 변화에 대한 손상평가 인자들의 변화를 관찰하고, 실무에서 이러한 평가 결과를 활용할 수 있도록 가이드를 제시하고자 하였다. 한편, 국외의 몇몇 인접 건물에 대한 손상평가 사례와 본 연구에서 제안하고 있는 방법에 대한 비교 연구를 수행하여 현장에서 이를 활용할 수 있는 방법을 모색하였다.

  • PDF

도시폐기물의 강도특성 향상을 위한 현탁액 주입의 응용 (Application of Particulate Grouts for Improving Strength Characteristics of Municipal Wastes)

  • 천병식;박홍규;장연수
    • 한국지반공학회지:지반
    • /
    • 제13권1호
    • /
    • pp.59-74
    • /
    • 1997
  • 본 논문에는 사용종료된 쓰레기 매립장의 건설부지로의 개발가능성을 알아 보기 위하여 지반 조사와 침하해석을 수행한 결과를 나타내었다. 쓰레기 폐기물의 침하특성을 저감하고 강도특성을 향상하기 위하여 생석회와 시멘트 계통 그라우트재를 혼합 그 특성변화를 분석하였으며 대상 약액으로는 생석회, 보통시멘트, 슬래그시멘트, Geocrete시멘트의 4종류가 사용되었다. 현장지반조사 결과 쓰레기의 매립기간이 짧아 유기질 함량이 큰 쓰레기가 매립기간이 긴 쓰레기에 비교하여 최적함수비는 크고 최대건조밀도가 작은 것으로 나타났다. 매립쓰레기의 두께가 지점별로 큰 차이를 보였으며 침하량 분석 결과 위치에 따른 침하량의 차이가 크게 나타났다. 고결공법의 적용성을 검토한 결과 쓰레기 강도의 향상정도는 Geocrete시멘트, 슬래그시멘트, 보통 포틀랜드시멘트, 생석회의 순으로 우수한 것으로 나타났다.

  • PDF

상재하중 및 인발하중으로 인한 식중매설연성관의 거동 특성 (The Response of Buried Flexible pipe due to Surcharge Load and Uplifting Force.)

  • 권호진;정인준
    • 한국지반공학회지:지반
    • /
    • 제3권3호
    • /
    • pp.31-48
    • /
    • 1987
  • 지중에 매설된 관에는 관위의 흙무게나 지표면상재하중으로 인하여 연직견력이 작용하며, 지진이나 불등침하등으로 인하여 상향하중이 작용하는 경우도 있다. 본 연구에서는 Marston-Spangler이론을 새로운 방법으로 분석하여 관위의 흙무게로 인해 매설권에 작용하는 압력에 관하여 검토하였고, 매설연성관에 대한 재하실험을 실시하여 지표면상재하중으 로 인한 매설관의 거동특성을 연구하였다. 또 매설관의 인발저항(uplifting resistance)이론의 검토와 상향인발실험을 통하여 최대인발저항을 구하는 방법 등을 연구하였다.

  • PDF

모형챔버시험을 이용한 점성토 지반에 설치된 경량포장체용 기초의 하중전달 특성 (An Analysis of Pile Foundation Load Transfer for Lightweight Pavement System in Clay Soil using Lab Chamber Test)

  • 이관호;신광호
    • 대한토목학회논문집
    • /
    • 제36권3호
    • /
    • pp.545-550
    • /
    • 2016
  • 본 연구에서는 말뚝기초의 실내모형시험을 통해 연약지반상의 경량포장체용 기초로서의 적합성을 분석 및 평가를 목적으로 하고 있다. 안전성 평가를 위해 실내모형시험용 경량포장체용 말뚝기초모형을 실제 포장체 사이즈의 1/30으로 축소한 모형을 이용하여 시험을 실시하였다. 지반 조건은 연약지반을 모사하여 모델링하였고, 말뚝은 마찰군말뚝으로 실험하였다. 제한된 실험으로부터 측정된 모형포장체의 침하량은 Case A는 0.86 mm, Case B는 0.70 mm, Case C는 0.50 mm로 측정되었다. 측정된 말뚝기초 모형의 실험값을 실제 크기로 환산하였을 때의 최대침하량과 부등침하량은 각각 25.8 mm와 10.8 mm로 도로교 설계기준에 의거하여 최대부등변위량인 50 mm와 부등변위량 20 mm를 넘지 않는 것으로 보이며 침하량을 기준으로 안전성을 평가 할 경우 안전한 것으로 판정되었다.

Borehole radar survey to explore limestone cavities for the construction of a highway bridge

  • Kim Jung-Ho;Cho Seong-Jun;Yi Myeong-Jong
    • 지구물리와물리탐사
    • /
    • 제7권1호
    • /
    • pp.80-87
    • /
    • 2004
  • During excavation work for the construction of a highway bridge in a limestone area in Korea, several cavities were found, and construction work was stopped temporarily. Cavities under the bridge piers might seriously threaten the safety of the planned bridge, because they could lead to excessive subsidence and differential settlement of the pier foundations. In order to establish a method for reinforcement of the pier foundations, borehole radar reflection and tomography surveys were carried out, to locate cavities under the planned pier locations and to determine their sizes where they exist. Since travel time data from the crosshole radar survey showed anisotropy, we applied an anisotropic tomography inversion algorithm assuming heterogeneous elliptic anisotropy, in order to reconstruct three kinds of tomograms: tomograms of maximum and minimum velocities, and of the direction of the symmetry axis. The distribution of maximum velocity matched core logging results better than that of the minimum velocity. The degree of anisotropy, defined by the normalized difference between maximum and minimum velocities, was helpful in deciding whether an anomalous zone in a tomogram was a cavity or not. By careful examination of borehole radar reflection and tomography images, the spatial distributions of cavities were delineated, and most of them were interpreted as being filled with clay and/or water. All the interpretation results implied that two faults imaged clearly by a DC resistivity survey were among the most important factors controlling the groundwater movement in the survey area, and therefore were closely related to the development of cavities. The method of reinforcement of the pier foundations was based on the interpretation results, and the results were confirmed when construction work was resumed.