• Journal of Microbiology and Biotechnology
• /
• 제23권4호
• /
• pp.539-544
• /
• 2013

The effects of culture depth (2-10 cm) and cell density on the growth rate and biomass productivity of Chlorella sp. XQ-200419 were investigated through the use of a self-designed open circular pond photobioreactor-imitation system. With increases in culture depths from 2 to 10 cm, the growth rate decreased significantly from 1.08 /d to 0.39 /d. However, the biomass productivity only increased slightly from 8.41 to 11.22 $g/m^2/d$. The biomass productivity (11.08 $g/m^2/d$) achieved in 4 cm culture with an initial $OD_{540}$ of 0.95 was similar to that achieved in 10 cm culture with an initial $OD_{540}$ of 0.5. In addition, the duration of maximal areal productivity at a 4 cm depth was prolonged from 1 to 4 days, a finding that was also similar to that of the culture at a 10 cm depth. In both cases, the initial areal biomass densities were identical. Based on these results and previous studies, it can be concluded that the influence of culture depth and cell density on areal biomass productivity is actually due to different areal biomass densities. Under suitable conditions, there are a range of optimal biomass densities, and areal biomass productivity reaches its maximum when the biomass density is within these optimal ranges. Otherwise, biomass productivity will decrease. Therefore, a key factor for high biomass productivity is to maintain an optimal biomass density.

• 한국미생물생명공학회:학술대회논문집
• /
• 한국미생물생명공학회 1979년도 춘계학술대회
• /
• pp.115.2-115
• /
• 1979

By employing a two-stage continuous culture system, some of important physiological parameters involved in cellulase bicsynthesis have been evalua-ted with an ultimate objective of detigning an op-timally controlled tellulase process. Volumetric and specific cellulase productivities obtained were 90 IU/liter/hr and 8IU/g biomass/hr respectively. The maximum specific enzyme productivity observed was 14.8 IU/g hiomass/hr. The optimal dilution rate in the second stage which corresponded to the maximum enzyme productivity was 0.026-0.028 hr$^{-1}$ , and the specific growth rate in the second stage ihat suported maximum specific enzyme productivity was equal to orslightly less than zero. The maintenance coefficients deter-mined for oxygen and for carbon source are M$_{o}$=0.85mmmole/g biomass/hr and M$_{c}$=0.14 mmole hexose/g bio mass/hr respectively. The yield constants determined are; Y(x/o) =32.3g biomass/mole oxygen, Y (x/c) =1.1g bio-mass/g carbon or 0.44g biomass/g hexose, Y(x/n) = 19.6g biomass/g nitrogen for the enzyme produc-tion stage and 12.5g biomass/g nitrogen for the cell growth stage.e.e.

• 대한환경공학회지
• /
• 제39권6호
• /
• pp.332-338
• /
• 2017

본 연구는 혼합영양생물인 Scenedesmus acuminatus의 최적배양조건을 찾기 위한 연구로서 최적 공기주입량, 아세테이트 주입량, $CO_2$ 주입에 대해 실험을 진행하였다. 공기주입량은 0.72 vvm에서 최대 비성장속도와 최대바이오매스 생산량을 얻을 수 있었으며, 0.3 M의 아세테이트를 주입하였을 때 최대 비성장속도와 최대바이오매스 생산량을 얻었다. 반연속배양에서는 추가로 $CO_2$ 주입이 배양에 미치는 영향을 파악하였다. $CO_2$ 주입 실험에서는 아세테이트로 50% 치환한 후에 최대비성장속도($0.460d^{-1}$)와 최대바이오매스 생산성($0.936gL^{-1}d^{-1}$)을 얻을 수 있었으며 이후 치환이 계속될수록 최대비성장속도와 최대바이오매스 생산성은 지속적으로 감소하였다. 공기주입 실험에서는 JM 배지로 배양할 때 가장 높은 비성장속도($0.381d^{-1}$)와 최대바이오매스 생산성($0.253gL^{-1}d^{-1}$)을 보여주었지만 이후 아세테이트를 함유한 배지로 50% 치환하였을 때 오히려 초기값보다 감소하는 것을 관찰하였다.

• 한국물환경학회지
• /
• 제31권2호
• /
• pp.134-141
• /
• 2015

The focus of this study was to observe the growth of Chlorella vulgaris and Botryococcus braunii under mixotrophic conditions (i.e., added acorn) with the aim of increasing biomass and triacylglycerols (TAGs) content. The result of investigation indicated that the acorn contains a lot of carbonate (87.29%) and glucose (97.99 mg%). A significant growth of biomass was obtained when grown in acorn rich environment comparing to autotrophic conditions. 3 g/L acorn yielded the highest biomass concentration for these strains. Thus, the biomass productivity with 3 g/L acorn was obtained 2.31 times and 2.10 times higher than that of authotrophic conditions for Chlorella vulgaris and Botryococcus braunii, respectively. The maximum amount of TAGs was reached 14.35% and 18.41% for Chlorella vulgaris and Botryococcus braunii, respectively, in the growth medium with 5 g/L acorn. The effect of acorn could enhance the investigated microalgae growth, biomass productivity and TAGs content. This provides a feasible way to reduce the cost of bioenergy production from microalgae.

• ALGAE
• /
• 제28권2호
• /
• pp.193-202
• /
• 2013

Nitrogen availability and cell density each affects growth and cellular astaxanthin content of Haematococcus pluvialis, but possible combined effects of these two factors on the content and productivity of astaxanthin, especially under outdoor culture conditions, is less understood. In this study, the effects of the initial biomass densities IBDs of 0.1, 0.5, 0.8, 1.5, 2.7, 3.5, and 5.0 g $L^{-1}$ DW and initial nitrogen concentrations of 0, 4.4, 8.8, and 17.6 mM nitrate on growth and cellular astaxanthin content of H. pluvialis Flotow K-0084 were investigated in outdoor glass column photobioreactors in a batch culture mode. A low IBD of 0.1 g $L^{-1}$ DW led to photo-bleaching of the culture within 1-2 days. When the IBD was 0.5 g $L^{-1}$ and above, the rate at which the increase in biomass density and the astaxanthin content on a per cell basis was higher at lower IBD. When the IBD was optimal (i.e., 0.8 g $L^{-1}$), the maximum astaxanthin content of 3.8% of DW was obtained in the absence of nitrogen, whereas the maximum astaxanthin productivity of 16.0 mg $L^{-1}\;d^{-1}$ was obtained in the same IBD culture containing 4.4 mM nitrogen. The strategies for achieving maximum Haematococcus biomass productivity and for maximum cellular astaxanthin content are discussed.

• Mycobiology
• /
• 제30권3호
• /
• pp.166-169
• /
• 2002

Protein productivity by the cellulolytic fungi, Trichoderma viride(MTCC 800), Chaetomium globosum and Aspergillus terreus was compared in co-culture and mixed culture fermentations of cashewnut bran. Co-cultures were more effective in substrate saccharification, which ranged between $85{\sim}88%$ compared to the $62{\sim}67%$ saccharification shown by the monocultures. Maximum saccharification was induced by T. viride and C. globosum co-culture resulting in the highest 34% release of reducing sugars. The maximum 16.4% biomass protein and the highest protein productivity(0.58%) were shown by T. viride and A. terreus co-culture. A. terreus performed better in co-culture in the presence of T. viride rather than with C. globosum. Among the cellulolytic enzymes, FPase(Filter Paper Cellulase) activity was significantly higher in all the co-cultures and in the mixed culture than in their respective monocultures. Mixed culture fermentation involving all the three fungi was not effective in increasing the per cent saccharification or the biomass protein content over the co-cultures.

• Journal of the korean society of oceanography
• /
• 제35권1호
• /
• pp.34-45
• /
• 2000

Spatial distributions of phytoplankton biomass and nutrients were examined to investigate the magnitude of phytoplankton blooms along the marginal ice zone (MIZ) in the northwestern Weddell Sea during austral summer of 1995. High phytoplankton biomass was associated with the MIZ in the study area. Vertical stability induced by meltwater appears to be the most important factor controlling phytoplankton biomass distribution. Nitrate concentrations are significantly depleted within the upper water column at the phytoplankton biomass maximum. The time required to attain the observed nutrient depletion was calculated from phytoplankton biomass and nitrate depletion, which ranges from 27 to 68 days in transect 4 and from 33 to 145 days in transect 3. Phytoplankton production was also calculated from nitrate depletion and time-scales of nitrate depletion, which varies from 272 to 1752 mg C m$^{-2}$ day$^{-1}$ in transect 4 and from 327 to 2648 mg C m$^{-2}$ day$^{-1}$ in transect 3. In the Southern Ocean where primary productivity shows large temporal and spatial variations, the productivity measurement from nutrient depletion can provide an average rate of primary production during phytoplankton bloom.

• KSBB Journal
• /
• 제27권2호
• /
• pp.97-102
• /
• 2012

In the present study, the biomass productivity of two green microalgae (Chlorella sp. and Dunaliella salina DCCBC2) were assessed in a 12 L tubular photobioreactor under optimum culture conditions. In the batch culture optimization process, the Chlorella sp. biomass was obtained as 1.2 g/L under atmospheric air as a sole $CO_2$ source and other culture conditions as follows: light intensity, temperature, pH, $NH_4Cl$ and $K_2HPO_4$ were 100 ${\mu}E/m^2/s$, $27^{\circ}C$, 7.0, 20.0 mM and 2.0 mM, respectively. On the other hand, 2.9 g/L of D. salina DCCBC2 biomass production was observed under the following conditions: light intensity, temperature, pH, $KNO_3$ and $K_2HPO_4$were 80 ${\mu}E/m^2/s$, $27^{\circ}C$, 8.0, 3.0 mM and 0.025 mM, respectively. At 1% $CO_2$ supply to the reactor, the Chlorella sp. production was reached 1.53 g/L with 25% increment under the same operating conditions. In addition, the maximum D. salina DCCBC2 biomass was observed as 3.40 g/L at 3% $CO_2$ concentration. Based on the aforementioned optimized conditions, the dilution rate and maximal biomass productivity of Chlorella sp. and D. salina DCCBC2 in the continuous cultivation were 0.4/d and 0.6 g/L/d and 0.6/d and 1.5 g/L/d, respectively.

• Korean Chemical Engineering Research
• /
• 제56권1호
• /
• pp.73-78
• /
• 2018

본 연구는 혼합영양 배양 조건에서 acetate의 주입이 Anabena azollae의 성장에 미치는 영향을 파악하기 위해 수행되었다. 4가지 종류의 acetate 중 ethyle acetate가 Anabena azollae의 성장에 가장 효과적이라고 밝혀졌으며, 주입한 ethyle acetate의 농도가 증가할수록 성장속도는 증가하는 것을 확인하였다. 40 mM의 ethyl acetate의 경우 비성장속도는 $0.979day^{-1}$, 최대바이오매스 생산성은 $0.293g\;L^{-1}\;d^{-1}$로 본 연구에서 배양속도가 가장 빠른 것으로 판명되었다. Acetic acid와 butyl acetate의 경우 Anabena azollae 성장을 방해하는 것으로 나타났다. Aetration의 경우 0.54 vvm에서 성장속도가 가장 빨랐다. 반연속배양에서는 aeration 실험이 끝난 후 연속하여 ethyle acetate 주입을 하여 배양을 하였다. 회분식실험에 비해 반연속배양에서의 비성장속도와 최대바이오매스 생산성은 모두 감소하였지만 최대 농도는 5.91 g/L로 가장 큰 값을 나타내었다.

• 한국산림과학회지
• /
• 제106권1호
• /
• pp.54-62
• /
• 2017

산림바이오매스의 효율적인 수집 및 운반을 위하여 칩하베스터를 개발하고 작업 생산성 및 비용을 분석하였다. 칩하베스터의 주요 목표제원은 속도 8 km/hr, 최대등판능력 $30^{\circ}$, 최대적재량 2,000 kg 등이고, 차체구조는 회전반경을 줄이기 위하여 차체굴절식을 채택하고, 주행장치는 6륜 구동으로 후륜은 접지력을 높이기 위하여 탠덤보기방식을 채택하였다. 개발된 칩하베스터의 주행테스트 결과, 칩 적재시 ${\pm}10%$ 경사에서 각각 6.9 km/hr, 8.1 km/hr로 나타났다. 또한, 공차시 ${\pm}10%$ 경사에서 각각 7.3 km/hr, 7.9 km/hr로 나타났다. 따라서, 주행성능은 개발목표를 달성하였다고 판단된다. 작업생산성 및 비용을 분석한 결과, 파쇄 및 운반의 작업생산성은 약 $10m^3$/일이었으며, 작업비용은 393,126원/일로 나타났다.