• 제목/요약/키워드: Maximum Velocity Defect

검색결과 4건 처리시간 0.018초

톱니형 휜이 부착된 원주의 근접후류특성 연구 (II) - 시간평균 유동장 비교 - (Characteristics of Near Wake Behind a Circular Cylinder with Serrated Fins (II) - Comparison of Time Mean Flow Fields- -)

  • 류병남;김경천;부정숙
    • 대한기계학회논문집B
    • /
    • 제26권8호
    • /
    • pp.1191-1200
    • /
    • 2002
  • The measurements of velocity vectors are made in the near wake(X/d=5.0) of a circular cylinder with serrated fins. Velocity of fluid which flow through fins decreases as increasing fin height and freestream velocity and decreasing fin pitch. Therefore the velocity distribution at X/d=0.0 has lower gradient with increasing freestream velocity and fin height and decreasing fin pitch. The discontinuity of the streamwise velocity gradient is observed near the fin edge and causes significant changes in V-component velocity distribution in the near wake. This change attributes to the differences in Strouhal number and entraintment flow behavior. Increased turbulent intensity around a circular cylinder due to the serrated fins and entrainment flow are important factors for the recovery of velocity defect. The widths of velocity and turbulent intensity distribution of fin tubes are wider than those of a circular cylinder. The normalized velocity and turbulent intensity distributions with a hydraulic diameter which is proposed in this paper are in closer agreement with those of a circular cylinder.

Numerical Analyses on the Formation, Propagation, and Deformation of Landslide Tsunami Using LS-DYNA and NWT

  • Seo, Minjang;Yeom, Gyeong-Seon;Lee, Changmin;Lee, Woo-Dong
    • 한국해양공학회지
    • /
    • 제36권1호
    • /
    • pp.11-20
    • /
    • 2022
  • Generally, tsunamis are generated by the rapid crustal movements of the ocean floor. Other factors of tsunami generation include landslides on coastal and ocean floor slopes, glacier collapses, and meteorite collisions. In this study, two numerical analyses were conducted to examine the formation, propagation, and deformation properties of landslide tsunamis. First, LS-DYNA was adopted to simulate the formation and propagation processes of tsunamis generated by dropping rigid bodies. The generated tsunamis had smaller wave heights and wider waveforms during their propagation, and their waveforms and flow velocities resembled those of theoretical solitary waves after a certain distance. Second, after the formation of the landslide tsunami, a tsunami based on the solitary wave approximation theory was generated in a numerical wave tank (NWT) with a computational domain that considered the stability/steady phase. The comparison of two numerical analysis results over a certain distance indicated that the waveform and flow velocity were approximately equal, and the maximum wave pressures acting on the upright wall also exhibited similar distributions. Therefore, an effective numerical model such as LS-DYNA was necessary to analyze the formation and initial deformations of the landslide tsunami, while an NWT with the wave generation method based on the solitary wave approximation theory was sufficient above a certain distance.

하수오니에 왕겨 및 톱밥을 혼합한 호기성 퇴비화 (Aerobic Composting of sewage sludge Mixed Rice Hulls and Sawdusts)

  • 정봉수;강용태
    • 한국농공학회지
    • /
    • 제28권3호
    • /
    • pp.99-106
    • /
    • 1986
  • This study was carried out to investigate the effects of moisture content, temperature, C/N ratio and pH of the sewage sludge mixed with hulle and sawdusts for making compost under aerobic condition and to improve the defect of the structure of experimental equipment heat lose and handling method. and obtained results were as follows 1.The temperature was reached 73$^{\circ}$ C around 50 hours fermentation in the condition of 0.8 L/min. of air and 60.4% of moisture content. and favorable moisture content of initial condition ranged from 50 to 65% 2.The temperature near bottom of the batch composter was decreased due to evaporate water vapor and lose the heat produced during aeration. and it is required to be improved. 3.The temperature in the batch composter from the center to the inside wall surface was gradually decreased. the temperatures of the points located in r=9cm and the wall surface were 4$^{\circ}$ C and 6$^{\circ}$ C respectively. and therefore it is required to be insulated. 4. The maximum C02 production was obtained as 7.3% per volume in the temperature of 63$^{\circ}$C at the moisture content of 60% 5.The temperature range of active microbes growth was found to be as 20$^{\circ}$C to 40$^{\circ}$C in the case of mesophiles and 50$^{\circ}$C to 65$^{\circ}$C in the case of thermophiles due to increase and decrease C02 production. 6.C/N ratio after decomposition was 1.3 to 2.6 smaller than that of initial one due to increase the amount of nitrogen. The more C/N ratio increased. the less the reaction velocity decresed. The optimum of it as found to be 30. 7.pH values after decomposition were slightly increased than that of initial ones. The reaction velocity was decreased at acid and alkall condition. Therefore it is neseseary to neutralize the medium to improve the reaction.

  • PDF

수중 글라이더를 이용한 동해 횡단 사례 보고 (Report of East Sea Crossing by Underwater Glider)

  • 박요섭;이신제;이용국;정섬규;장남도;이하웅
    • 한국해양학회지:바다
    • /
    • 제17권2호
    • /
    • pp.130-137
    • /
    • 2012
  • 수중 글라이더는 해양의 수직 물성을 라그랑지안 방식으로 파악하기 위해 새롭게 고안된 관측 플랫폼이다. 한국해양연구원은 2011년 3월 국내 최초로 경북 후포와 울릉 서안까지 177 km의 수평거리를 총 6일(153시간)동안 경로 계획을 통해 자율 잠항관측을 성공하였다. 실험에 사용한 글라이더는 미국 ANT사의 Littoral Glider 였으며, 주관측 센서로는 Applied Microsystem사의 수온 및 음속 센서를 장착하였다. 시험 운항 동안 경로 대상 해역의 수심 5 m에서 200 m까지 매 5초마다의 수온 및 음속 프로파일 총 1408회 취득하였다. 또한 시험 운항 중에 수중 글라이더가 보유하고 있는 다양한 운동모드(정점 수직 관측 모드, 경로 추종 모드, 선수각 유지 모드, 정점 유지 모드, 특정 수심 유지 모드 등)를 시험하였고, 모든 운동모드가 정상적으로 운영됨을 확인하였다. 이번 실해역 조사를 통해, 수중 글라이더는 최대 2노트 이하의 해류 환경 하에서 사용자가 원하는 방향과 심도대로 관측을 수행할 수 있으며, 내부 부력 조절 없이 최대 5 kg의 센서 탑재가 가능함을 확인하였다.