• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.35-40
• /
• 2002

This paper presents a numerical study on the heat of hydration of reinforced concrete with different steel ratio. And this study intends to determine the effect of the steel on the variation of temperatures during hydration. In order to do this, the thermal analyses of the pier-foundation models were carried out using the finite element analysis program, ADINA. As the steel rate increased, the maximum temperature and the internal-external temperature difference decreased.

• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.66-68
• /
• 2004

Induction heating is a process that is accompanied with magnetic and thermal situation. When the high-frequency current flows in the coil, induced eddy current generates heat to conductor. To simulate an induction heating process, the finite element analysis program was developed. A coupling method between the magnetic and thermal routines was developed. In the process of magnetic analysis and thermal analysis, magnetic material properties and thermal material properties depending on temperature are taken into consideration. In this paper, to predict the angular deformation, temperature difference and the shape of heat affected zone were discussed. Also appropriate coil shape for maximum angular deformation were proposed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.409-426
• /
• 2001

Absorbed power of the human head radiated from a 900 MHz portable phone and temperature rise are computed using FDTD(Finite-Difference Time-Domain) method. For this computation the 5 layered media for the human head modeling and the monopole antenna attached to metallic box for the portable phone are used. To reflect the real circumstances typical sizes of human heads and portable phones are considered in the calculation. The length of monopole antenna is 8.15 cm, and the output power of a phone is 600 mW. Under the predetermined model the distribution of 1 g, 10 g averaged SAR and temperature rise rate over the human head are calculated, from which it was found that the position of maximum SAR is near at the head skin surface, not deep places far into the head. The position of the highest temperature is located far from the head skin more than that of the maximum SAR occured. The averaged SAR and temperature along the distance between the head and phone are calculated according to seperation distance between the head and phone.

• Journal of Environmental Science International
• /
• v.26 no.11
• /
• pp.1247-1253
• /
• 2017

The Fuji variety of apple, introduced in Japan, has excellent storage quality and good taste, such that it is the most commonly cultivated apple variety in Gunwi County, North Gyeongsang Province, Korean Peninsula. Accurate prediction of harvest maturity allows farmers to more efficiently manage their farm in important aspects such as working time, fruit storage, market shipment, and labor distribution. Temperature is one of the most important factors that determine plant growth, development, and yield. This paper reports on the beta distribution (function) model that can be used to simulate the the phenological response of plants to temperature. The beta function, commonly used as a skewed probability density in statistics, was introduced to estimate apple harvest maturity as a function of temperature in this study. The model parameters were daily maximum temperature, daily optimum temperature, and maximum growth rate. They were estimated from the input data of daily maximum and minimum temperature and apple harvest maturity. The difference in observed and predicted maturity day from 2009 to 2012, with optimal parameters, was from two days earlier to one day later.

• Journal of agriculture & life science
• /
• v.50 no.2
• /
• pp.187-194
• /
• 2016

The purpose of this study was to analyze temperature distribution characteristics using a model swine housing for temperature sensor adjustable positioning and developed a sensor and controller embedded exhaust fans utilizing ICT fusion technology for windowless swine housing. Temperature measured by the sensor attached on the exhaust fan was also determined that there is no problem, the temperature is located in the upper fan given the measured errors shown in the 1℃ temperature difference between the lower temperature than the other positions in the model swine housing. The performance of the exhaust fan at maximum output was found to be 1920rpm, air flow rate 125㎥/min. When the open area ratio of 70% one proper air volume of the exhaust fan was found to be 75㎥/min, 60pa. Maximum efficiency in all of the output of the exhaust fan is exhibited at about 70% open area ratio of the damper. The number of revolution of the exhaust fan was 1920rpm when the output was a maximum of 100%. AC output phase of the pulse duty ratio change of the controller was shown to change without delay. It was determined that the instant fan speed control is possible.

• Atmosphere
• /
• v.33 no.5
• /
• pp.477-492
• /
• 2023

Based on the new climate normals (1991~2020), annual mean, maximum and minimum temperature is 12.5℃, 18.2℃, and 7.7℃, respectively while annual precipitation is 1,331.7 mm, the annual mean wind speed is 2.0 m s^-1, and the relative humidity is 67.8% in the Republic of Korea. Compared to 1981~2010 normal, annual mean temperature increased by 0.2℃, maximum and minimum temperatures increased by 0.3℃, while the amount of precipitation (0.7%) and relative humidity (1.1%) decreased. There was no distinct change in annual mean wind speed. The spatial range of the annual mean temperature in the new normals is large from 7.1 to 16.9℃. Annual precipitation showed a high regional variability, ranging from 787.3 to 2,030.0 mm. The annual mean relative humidity decreased at most weather stations due to the rise in temperature, and the annual mean wind speed did not show any distinct difference between the new and old normals. With the addition of a warmer decade (2011~2020), temperatures all increased consistently and in particular, the increase in the maximum temperature, which had not significantly changed in previous decades, was evident. The increasing trend of annual and summer precipitation by the 2010s has disappeared in the new normals. Among extreme climate indices, MxT30 (Daily maximum temperature ≥ 33℃ days), MnT25 (Daily minimum temperature ≥ 25℃ days), and PH30 (1 hour maximum precipitation ≥ 30 mm days) increased while MnT-10 (Daily minimum temperature < -10℃ days) and W13.9 (Daily maximum wind speed ≥ 13.9 m/s days) decreased at a statistically significant level. It is thought that a detailed study on the different trends of climate elements and extreme climate indices by region should be conducted in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.611-619
• /
• 2021

Porous asphalt pavement (PAP) has many functions, such as reducing accidents and decreasing noise. On the other hand, vulnerability is inevitable because PAP contains approximately 20% porosity. This study evaluated the effects of the maximum aggregate size (MAS), temperature, and porosity on the PAP durability. The indirect tensile strength measures durability. This study tested the samples that stayed dry and were moisturized by freezing and thawing for mixtures having the same porosity of 20% and MAS of 13mm, 10mm, and 8mm. The same test was performed on a mixture of 20% and 22% voids made of the same material with a MAS of 10mm. As a result, for 20% porosity, significant differences in the changes in MAS and temperature were found. A clear difference was observed between 8mm and 13mm under dry conditions, but there were no other significant differences in the MAS change. Furthermore, there was a clear difference in temperature for the change in porosity and temperature, but the gap in 2% porosity at 20% did not show a clear difference. Therefore, it is necessary to develop a more durable PAP through quantitative evaluations of the factors affecting the PAP durability.

• Journal of Biosystems Engineering
• /
• v.43 no.4
• /
• pp.342-351
• /
• 2018

Purpose: Recently, an increasing number of farms have been cultivating shiitake mushrooms using a sawdust substrate and a cooler/heater. In this study, an attempt was made to develop an environmental control system using a heat pump for cultivating high-quality shiitake mushrooms. Methods: An environmental control system, consisting of an air-to-water type heat pump, a thermal storage tank, and a radiator in a variable opening chamber, was designed and fabricated. The system was also installed in the cultivation facility of a farm cultivating shiitake mushrooms so as to compare the proposed control system with a conventional environmental control system using a cooler-condensing unit and an electric hot water boiler. Results: The uniformity of the environment was analyzed through environment measurements taken at several positions inside the cultivation facility. It was determined that the developed environmental control system is able to control the variations in temperature and relative humidity to within 1% and 3%, respectively. In addition, a maximum temperature difference of $30^{\circ}C$ (maximum of $35^{\circ}C$, minimum of $5^{\circ}C$) and a maximum relative humidity difference of 30% (maximum of 90%, minimum of 60%) can be attained within 30 min inside the cultivation facility through the cooling of the heat pump and heating of the radiator in a variable opening chamber. Thus, the developed control system can be used to cultivate high-quality shiitake mushrooms more effectively than a conventional cooler and heater. Conclusions: In comparison with a conventional environmental control system, the developed system decreased the yield of ordinary mushrooms by 65%, and increased that of high-quality mushrooms by 217%. This corresponds to a 16% increase in gross farm income. Consequently, the developed system is expected to improve the income of shiitake mushroom cultivating farms.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.227-233
• /
• 2020

The demand for porous asphalt mixtures is increasing because it has a range of functions, such as reducing traffic accidents and traffic noise. On the other hand, its application is delayed due to concerns about durability. This study examined the effects of the maximum aggregate size, temperature, and porosity of an asphalt mixture on the durability. To this end, the durability measure was set to the Cantabro loss rate. Mixtures having the same porosity of 20% and the maximum aggregate diameters of 13 mm, 10 mm, and 8 mm were tested at 20℃ and -20℃. Mixtures containing 20% and 22% voids with the same material having the same diameter were tested. With 20% porosity, there was no significant difference in durability when there was a change in the maximum aggregate size. There was a significant difference between 20℃ and -20℃, but no significant difference in durability when there was a 2% difference between 20% and 22%. The significance of this study is that the durability was presented quantitatively by tests and statistical analysis. This research will help improve the durability of porous asphalt mixtures by evaluating the factors affecting the durability quantitatively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.1
• /
• pp.89-97
• /
• 1984

This study was carried out to investigate the effect of seasonal changes on some of the morphological and physiological characteristics, including the photosynthetic abilities and dark respiration, of young ginseng plants due to planting location under shading. The results obtained are as follows: 1. Seedlings and 2-year old plants planted in the back rows appeared to have broader leaf area, and their leaf weight greatly increased in September. Chlorophyll content was significantly reduced in September rather than in June and the plants in the back rows had more chlorophyll content than those in the front rows. 2. There was no difference in the light compensation point between the front and back rows in June, while in September the light compensation point of 2-year old ginseng leaves was much lower for plants in the back rows compared with those in the front rows. A difference in the light saturation point was not noticeable between plants in the front and back rows in June and September. But the light saturation point of 2-year old ginseng leaves at $15^{\circ}C$ was high in June, while it was high at $20^{\circ}C$ high in September. 3. Maximum photosynthetic ability was attained at $15^{\circ}C$ in June and at $20^{\circ}C$ in September. During June no significant difference in photosynthetic ability was found between plants in the front and back rows, but in September the amount of photosynthesis was significantly increased at the leaves of seedlings as well as 2-year old plants planted in the back rows. 4. The optimum temperature for maximum photosynthesis in 2-year old plants ranged from $14.0^{\circ}C$ to $14.5^{\circ}C$ in June and from $19.5^{\circ}C$ to $20.5^{\circ}C$ in September. However, the optimum temperature for maximum photosynthesis in the seedlings was from $21.2^{\circ}C$ to $21.6^{\circ}C$ in September, but a significant difference in the optimum temperature for the maximum photosynthesis in seedlings and 2-year old plants was not noticeable between the front and back rows. 5. The respiration rate was rather high in seedlings compared with 2-year old plants. During September the respiration rate in seedlings was much lower in the back rows than in the front rows. The rate of increase in the respiration of 2-year old plants was higher at September than June. The increase in respiration rate due to temperature was more significant in seedlings than 2-year old plants. 6. In September, the level of $Q_{10}$ in 2-year old plants was much lower than that found in seedlings. During June, 2-year old plants showed lower $Q_{10}$ levels at a temperature difference between $15^{\circ}C$ and $25^{\circ}C$; but in September this occurred at a temperature difference between $20^{\circ}C$ and $30^{\circ}C$.