• Journal of Korea Water Resources Association
• /
• v.32 no.3
• /
• pp.281-289
• /
• 1999

Small-scale hydropower projects at existing agricultural reservoirs can contribute to produce electric energy by maximizing the use of releases from the reservoirs. The irrigation water duration, the reservoir hydropower simulation, and the nonlinear programming model are employed to estimate potential hydroelectric energy at an existing reservoir. The nonlinear programming model consists of finding a maximum hydroelectric energy subject to irrigation water demand constraints. The sample reservoir given a set of inflow and irrigation water is considered. The optimal solutions by the optimization model yield the most hydroelectric energy for the analysis period in the three methods. Consequently, the nonlinear programming model uses the most water for hydropower generation with respect to the total inflow of the sample reservoir. It is also found that additional storage by increasing the normal water level of the sample reservoir does not significantly increase the annual hydroelectric energy for the given reservoir. It is expected that the optimization model and the proposed procedure for estimating potential hydroelectric energy can be applied to evaluate feasibility analysis for small scale hydropower additions at existing agricultural dams.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.5
• /
• pp.109-115
• /
• 2016

A demand of high bearing capacity of piles to resist heavy static loads has been increased. For this reason, the utilization of large diameter PHC piles including a range from 700 mm to 1,200 mm have been increased and applied to the construction sites in Korea recently. In this study, in order to increase the flexural strength capacity of the PHC pile, the large diameter composite PHC pile reinforced by in-filled concrete and reinforcement was developed and manufactured. All the specimens were tested under four-point bending setup and displacement control. From the strain behavior of transverse bar, it was found that the presence of transverse bar was effective against crack propagation and controlling crack width as well as prevented the web shear cracks. The flexural strength and mid-span deflection of LICPT specimens were increased by a maximum of 1.08 times and 1.19 times compared to the LICP specimens. This results indicated that the installed transverse bar is in an advantageous ductility performance of the PHC piles. A conventional layered sectional analysis for the pile specimens was performed to investigate the flexural strength according to the each used material. The calculated bending moment of conventional PHC pile and composite PHC pile, which was determined by P-M interaction curve, showed a safety factor 1.13 and 1.16 compared to the test results.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.6
• /
• pp.153-161
• /
• 2010

Numerous past studies have shown that safety and serviceability of many concrete infrastructures and buildings built in 1970's have far less strength capacities than their original intended design capacities, thereby requiring repair and strengthening. Currently, aged concrete structures are being repaired using various methods developed in the past. Unfortunately, these methods do not consider the specific conditions that these members are under, but they merely attach repairing materials on the external surface for random strength improvements. Therefore, in order to improve repair and strengthening methods by considering composite behavior between repairing material and structural member, enhanced construction methodologies are needed. Also, the enhanced repairing and strengthening methods must be able to be implemented on structural members constructed using high performance concrete to meet the present construction demand of building mammoth structures. Therefore, in this study, a repairing and strengthening method for retrofitting high strength concrete (HSC) columns that can effectively improve column performance is developed. A square HSC column's cross-sectional shape is converted to an octagonal shape by attaching precast members on the surface of the column. Then, the octagonal column surface is surface wrapped using Carbon Fiber Sheets (CFS). The method allows maximum usage of confinement effect from externally jacketing CFS to improve strength and ductility of repaired HSC columns. The research results are discussed in detail.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.67-73
• /
• 2017

Recently, the demand for large diameter piles has been rapidly increased in order to secure the allowable bearing capacity of pile foundation due to the increase of large structures such as high rise buildings. In this study, to improve the shear capacity of a conventional PHC pile, a large diameter composite PHC pile strengthened by in-filled concrete and shear reinforcement was manufactured. All the piles were tested according to the shear strength test method of Korean Standard. As a result of the shear test, the F-type piles which are produced without shear reinforcement occurred abrupt horizontal cracks after flexural and inclined shear cracks occurred. On the contrary, the FT-type piles which are produced with shear reinforcement exhibited stable flexural and inclined shear cracks uniformly over the entire pile without abrupt horizontal cracks. Furthermore, the maximum load of the large diameter composite PHC pile improved to 2.9 times in the F series, and more than 3.3 times in the FT series compared to the conventional PHC pile. This result indicated that FT-type piles had excellent composite behavior due to the shear reinforcement and effectively prevented the unstable growth of inclined shear cracks.

• Journal of the Korean Geographical Society
• /
• v.31 no.4
• /
• pp.648-661
• /
• 1996

The traditional von Thunen model has various shortcomings. Perhaps the greatest dificiency is the model's sole emphasis on the production side of the economy;that is, the agricultural markets are rarely closed for demand. In thes paoer a closed model for a three-activity, two-dimensional economy is developed. Equillibrium solutions are generated for prices, land areas, and outputs. Comparative static analysis then follows. Attention is next given to a maximum expected-return model under environmental uncertainty. Land uses for the traditional model and the closed model are then compared.

• Korean Journal of Social Welfare
• /
• v.66 no.1
• /
• pp.221-249
• /
• 2014

This paper has the objectives to define the concept of 'Good Care' which is the service goal we are aiming essentially for the improvement of long-term care service quality, to find out the components for 'Good Care', and to explore the conditions that create a good care. In addition, we tried to find the answer about what is the best way to measure the service quality. For this, I referred the advanced researches which explored the fundamental properties of care and tried to find the answer from the accumulated wisdom of service field through the 5-year long term care service experience. As a result of research, the good care can be defined as helping someone to be able to maintain his own life as maximum as possible with the goal to assure total quality life. The most important condition for good care is making 'a good care relationship'. Without damaging the relationship between care provider and care receiver, the individualized service focusing on the demand of care receiver based on mutual reliability, mutual respect and smooth communication should be provided. For the evaluation system, it is reasonable to set the standard according to the size of each institution for the core quality of facility service and establish the certification system of absolute standard to carry out the quantitative evaluation rather than the relative evaluation in the whole. For the part over the absolute certification standard, it is reasonable for each institution to characterize its own characteristics autonomously and carry out the qualitative evaluation for this. For the evaluation of home visit care service, it is recommended to contain the evaluation contents such as user satisfaction, satisfaction of care worker, how well the case management system of home care service center is operated etc.

• Korean journal of applied entomology
• /
• v.41 no.4
• /
• pp.293-298
• /
• 2002

Cadusafos and fosthiazate were applied at the rate of 1.8 g a.i./6$\m^2$ as pre-plant or pre-plant＋post-plant treatments on winter-grown oriental melon in a greenhouse soil infested with Meloidogyne arenaria. Nematicides reduced root-knot nematode population from 35 to 90% compared with control； fosthiazate was better than cadusafos (P ＝ 0.003) and fosthiazate pre-plant＋post-plant application reduced nematode population densities as much as 90%. Nematicides increased yield in an average of 23% (11-38%) in May, 39% (2-65%) in June, and 31% (12-46%) for the total (P ＝ 0.085). The residue in the fruit of oriental melon by post-plant treatment of fosthiazate exceeded maximum residue limit of 0.2ppm, while the Cadusafos residue was below the limit. It is concluded that fosthiazate cannot be used as a post-plant treatment in winer-grown oriental melon with overall consideration, i. e., danger of residue, value of melon, costs of nematicide, consumer demand on safer agricultural products, and effects of fallow.

• Journal of Korea Water Resources Association
• /
• v.46 no.4
• /
• pp.345-359
• /
• 2013

In order to manage water quality efficiently and systematically through TMDL (Total Maximum Daily Load), the demand for the construction of spatial data for stream networks has increased for use with GIS-based water quality modeling, data management and spatial analysis. The objective of this study was to present an improved KRF (Korean Reach File) design as framework data for domestic stream networks to be used for various purposes in relation to the TMDL. In order to achieve this goal, the US EPA's RF (River Reach File) was initially reviewed. The improved design of the graphic and attribute data for the KRF based on the design of the EPA's RF was presented. To verify the results, the KRF was created for the Han River Basin. In total, 2,047 stream reaches were divided and the relevant nodes were generated at 2,048 points in the study area. The unique identifiers for each spatial object were input into the KRF without redundancy. This approach can serve as a means of linking the KRF with related database. Also, the enhanced topological information was included as attributes of the KRF. Therefore, the KRF can be used in conjunction with various types of network analysis. The utilization of KRF for water quality modeling, data management and spatial analysis as they pertain to the applicability of the TMDL should be conducted.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.3
• /
• pp.36-51
• /
• 2012

The demand for a climatological dataset with a regular spaced grid is increasing in diverse fields such as ecological and hydrological modeling as well as regional climate impact studies. PRISM(Precipitation-Elevation Regressions on Independent Slopes Model) is a useful method to estimate high-altitude precipitation. However, it is not well discussed over the optimization of PRISM parameters and DEM(Digital Elevation Model) resolution in South Korea. This study developed the PRISM and then optimized parameters of the model and DEM resolution for producing a gridded annual average precipitation data of South Korea with 1km spatial resolution during the period 2000-2005. SCE-UA (Shuffled Complex Evolution-University of Arizona) method employed for the optimization. In addition, sensitivity analysis investigates the change in the model output with respect to the parameter and the DEM spatial resolution variations. The study result shows that maximum radius within which station search will be conducted is 67km. Minimum radius within which all stations are included is 31km. Minimum number of stations required for cell precipitation and elevation regression calculation is four. Optimizing DEM resolution is $1{\times}1km$. This study also shows that the PRISM output very sensitive to DEM spatial resolution variations. This study contributes to improving the accuracy of PRISM technique as it applies to South Korea.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.6
• /
• pp.899-903
• /
• 2005

One of the most important volatile aroma compounds responsible for mushroom flavor is 1-octen-3-ol. To meet the demand for natural mushroom flavor, a study was needed for the production of natural chiral specific (-)-1-octen-3-ol that has higher flavor intensity than synthetic chiral mixtures of (+), and (-)-1-octen-3-ol. The biosynthesis of (-)-1-octen-3-ol was achieved by an aerobic oxidation using lipoxygenase (LOX) and hydroperoxide lyase (HPOL) isolated from commercially available mushrooms in Korean market. Safflower oil from Uiseong, Gyeongsangbuk-do, that contains $\geq75\%$ of linoleic acid, was hydrolyzed using lipase. The recovered linoleic acid was biotransformed to stereo-specific 10-hydroperoxy linoleic acid by LOX. 10- hydroperoxy linoleic acid was further cleaved to (-)-1-octen-3-ol by HPOL. A commercial bioprocess for the production of (-)-1-octen-3-ol was developed using a 5-liter jar fermenter with fruiting bodies of Agaricus bisporus harvested from Buyeo, Chungcheongnam-do. The maximum production of (-)-1-octen-3-o1 was achieved at $4^{\circ}C$, pH 6.5 and 800 rpm yielding 748 mg/kg of mushroom.