• 대한구순구개열학회지
• /
• 제13권1호
• /
• pp.1-10
• /
• 2010

구순구개열은 선천성 악안면 기형중에서 발생률이 가장 높은 질환이며 특히 동양인에게 높은 빈도로 발생된다. 그리고 순구개열에서는 파열부 조직의 선천적 상실과 파열부 봉합 수술 후 형성된 반흔에 의한 상악골의 열성장과 상악궁의 협착, 코의 형태 이상, 등과 함께 치아의 수, 크기와 형태 및 맹출 이상도 높은 빈도로 동반된다. 선천성 치아 발육 이상이 구순열 또는 구개열 가진 환자에게서 종종 보고되고 있다. 이런 치아 이상은 과잉치, 결손치, 크기, 형태, 맹출시기, 법랑질 광화 등의 많은 특징을 포함한다. 이번 연구의 목적은 다음과 같다. 1. 구순열 또는 구개열을 가진 환자의 선천성 치아 결손 발병률을 결정하여 정상인과 비교하는 것이다. 2. 상하악에서 파열이 있는 부위와 없는 부위의 제2소구치 결손가능성을 비교 하는 것이다. 구강악안면외과에서 구순구개열로 진단한 환자 중 2005년 1월~2009년 8월까지 전북대학교 구강악안면외과에서 치조열부위 자가골이식수술을 받은 32명의 환자로 초진시의 교정 chart, 구강악안면외과 chart, x-ray(파노라마, 치근단사진, 교합사진(상악), 석고 모델, 구강내 외 임상사진을 사용하여 순구개열군 별로 매복치, 과잉치, 결손치, 왜소치의 유무와 위치를 조사하여 다음과 같은 결론을 얻었다. 1. 결손치는 비교적 높은 발생빈도(53.1%)를 보였으며, 치아별 발생빈도는 상악 측절치와 상악 제2소구치, 하악 제2소구치 순이었다. 구순구개열군이 구순치조열군에 비해 발생률이 높게 나타났다. 그리고 구순구개열군 내에서 양측성이 편측성에 비해 결손치의 발생률이 높게 나타났다. 2. 왜소치는 71.6%에서 발견되었으며, 치아별 발생빈도는 상악측절치에서 가장 많았다. 구순치조열군이 구순구개열군에 비해 발생률이 높게 나타났다. 3. 치조열을 가진 환자에 있어 상/하악간 제2소구치의 선천적 결손에 유의한 차이가 있었다. 4. 구순구개열이 인접한 상악측절치의 발생중인 미성숙 조직에 영향을 미치며 파열부위와 좀 더 떨어져 있는 상악 제2소구치에도 일정한 영향을 미침을 이번 연구를 통해 다시 확인할 수 있었다.

• 대한구강악안면병리학회지
• /
• 제42권5호
• /
• pp.111-118
• /
• 2018

Nicotine of tobacco component has a controversial impact in the clinical outcome of dental implants. Although numerous nicotine effects on bone healing around implants have been presented, it is rarely reported in vitro study about normal human osteoblast(NHost) from oral and maxillofacial area at the surface of implants. The purpose of the present study was to evaluate the effect of nicotine on the proliferation and differentiation response of NHost to plasmatic and salivary levels of nicotine reported in smokers at the surface of screw-type plasma-sprayed titanium implants. NHosts were seeded on the surface of titanium implants and cultured for 21 days in ${\alpha}-MEM$ supplemented with 10% FBS, 50mg/ml ascorbic acid, 5mM ${\beta}$-glycerophosphate and 100nM dexamethasone. Seeded implants were exposed to various nicotine concentration(0.05-0.5mg/ml) from 1 to 21 days, and characterized for cell morphology, proliferation, differentiation, alkaline phosphatase(ALP) activity and ionized calcium concentration(Cai) of medium. Continuous exposure to higher nicotine concentration(above 0.3mg/ml) induced a dose- and time-dependent vacuolation of the cytoplasm, and a tendency to detach from the implant surface. 0.05mg/ml(lower nicotine concentration) did not cause significant effects in the cell proliferation and ALP activity. 0.1-0.2mg/ml caused evident dose-dependent effects in increased cell proliferation, ALP activity and earlier onset of matrix mineralization at levels up to 0.2mg/ml, while a dose-dependent inhibitory effect at 0.3-0.5mg/ml. Cai concentration of control group was decreased at 14 days. Increased Cai concentration at 0.1-0.2mg/ml, decreased Cai concentration at 0.3mg/ml and no change at 0.5mg/ml during the culture period were seen. It suggested that nicotine concentration could paly an role in modulating NHost activity as a contributing factor associated with proliferation and differentiation of NHost at the surface of implants.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제34권6호
• /
• pp.616-621
• /
• 2008

Osseointegration is a result of bone formation and bone regeneration processes, which takes place at the interface between bone and implant, and it indicates a rigid fixation that can be stably maintained while functional loading is applied inside the oral cavity as well as after implant placement. Although many researches were carried out about osseointegration mechanism, but cellular and molecular events have not been clarified. With recent development of molecular biology, some researches have examined biological determinants, such as cytokine, growth factors, bone matrix proteins, during osseointegration between bone and implant surface, other researches attempted to study the ways to increase bone formation by adhering protein to implant surface or by inserting growth factors during implant placement. Cellular research on the reaction of osteoblast especially to surface morphology (e.g. increased roughness) has been carried out and found that the surface roughness of titanium implant affects the growth of osteoblast, cytokine formation and mineralization. While molecular biological research in dental implant is burgeoning. Yet, its results are insignificant. We have been studying the roles of growth factors during osseointegration, comparing different manifestations of growth factors by studying the effect of osseointegration that varied by implant surface. Of many growth factors, $TGF-{\beta}$, IGF-I, BMP2, and BMP4, which plays a significant role in bone formation, were selected, and examined if these growth factors are manifested during osseointegration. The purpose of this article is to present result of our researches and encourage molecular researches in dental implant.

• 대한치과교정학회지
• /
• 제46권6호
• /
• pp.395-408
• /
• 2016

We report a case involving a young female patient with severe mandibular retrognathism accompanied by mandibular condylar deformity that was effectively treated with Le Fort I osteotomy and two genioplasty procedures. At 9 years and 9 months of age, she was diagnosed with Angle Class III malocclusion, a skeletal Class II jaw relationship, an anterior crossbite, congenital absence of some teeth, and a left-sided cleft lip and palate. Although the anterior crossbite and narrow maxillary arch were corrected by interceptive orthodontic treatment, severe mandibular hypogrowth resulted in unexpectedly severe mandibular retrognathism after growth completion. Moreover, bilateral condylar deformities were observed, and we suspected progressive condylar resorption (PCR). There was a high risk of further condylar resorption with mandibular advancement surgery; therefore, Le Fort I osteotomy with two genioplasty procedures was performed to achieve counterclockwise rotation of the mandible and avoid ingravescence of the condylar deformities. The total duration of active treatment was 42 months. The maxilla was impacted by 7.0 mm and 5.0 mm in the incisor and molar regions, respectively, while the pogonion was advanced by 18.0 mm. This significantly resolved both skeletal disharmony and malocclusion. Furthermore, the hyoid bone was advanced, the pharyngeal airway space was increased, and the morphology of the mandibular condyle was maintained. At the 30-month follow-up examination, the patient exhibited a satisfactory facial profile. The findings from our case suggest that severe mandibular retrognathism with condylar deformities can be effectively treated without surgical mandibular advancement, thus decreasing the risk of PCR.

• 치과방사선
• /
• 제21권1호
• /
• pp.45-63
• /
• 1991

This comparative study was designed to ascertain whether any differences existed between skeletal class Ⅱ malocclusion (

• 치과방사선
• /
• 제14권1호
• /
• pp.99-107
• /
• 1984

The auther studied clinically and. radiologically 48 cases which had been diagnosed as TMJ ankylosis in SNUDH (1974-1984). The purpose of this study is to analyse clinical features of TMJ ankylosis and to evaluate the effect of TMJ ankylosis on the growth of the mandible. The obtained results were as follows: 1. Total 48 cases of TMJ ankylosis patients consist of 23 males and 25 females. 65 percent of all cases of TMJ ankylosis occurred in patients between 1 and 10 years of age. The awerage age at the onset of ankylosis was 11.7 and average duration at the time of examination was 11.7 years. 2. Unilateral akylosis (81.3%) was more frequent than bilateral ankylosis (18.7%). 3. Traum a (57.9%) and infection (21.2%) were main etiology. 4. Inability to open the mouth (78.3%) and facial asymmetry (17.4%) were main chief complaints. 5. Mandibular morphology through radiographic features. (a) In TMJ ankylosis patients the ramus length of the ankylosed side was shorter than that of the non-ankylosed side. Comparing with the centrol group, ramus length of the each side was shorter than normal value. (b) The partial body length of the ankylosed side was longer than that of the non-ankylosed side. Comparing with the control group, partial body length of the each side was longer than normal value. Partial body length was related with antegonial notch depth. (c) Ratio of upper and lower ramus length at the level of mandibular foramen was smaller in ankylosed side than in non-ankylosed side. (d) Antegonial notch depth and ramus posterior contour depth were deeper in ankylosed side than in non-ankylosed side and those of both sides were deeper than normal value. (e) Gonial angle in ankylosed side was larger than in non-ankylosed side and that in both sides was smaller than normal value.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제37권3호
• /
• pp.214-224
• /
• 2011

Objective: This study examined the potential of the in vitro osteogenesis of microtopographically modified surfaces, RBM (resorbable blasting media) surfaces, which generate hydroxyapatite grit-blasting. Methods: RBM surfaces were modified hydroxyapatite grit-blasting to produce microtopographically modified surfaces and the surface morphology, roughness or elements were examined. To investigate the potential of the in vitro osteogenesis, the osteoblastic cell adhesion, proliferation, and differentiation were examined using the human osteoblast-like cell line, MG-63 cells. Osteoblastic cell proliferation was examined as a function of time. In addition, osteoblastic cell differentiation was verified using four different methods of an ALP activity assay, a mineralization assay using alizarin red-s staining, and gene expression of osteoblastic differentiation marker using RT-PCR or ELISA. Results: Osteoblastic cell adhesion, proliferation and ALP activity was elevated on the RBM surfaces compared to the machined group. The cells exhibited a high level of gene expression of the osteoblastic differentiation makers (osteonectin, type I collagen, Runx-2, osterix). imilar data was represented in the ELISA produced similar results in that the RBM surface increased the level of osteocalcin, osteopontin, TGF-beta1 and PGE2 secretion, which was known to stimulate the osteogenesis. Moreover, alizarin red-s staining revealed significantly more mineralized nodules on the RBM surfaces than the machined discs. Conclusion: RBM surfaces modified with hydroxyapatite grit-blasting stimulate the in vitro osteogenesis of MG-63 cells and may accelerate bone formation and increase bone-implant contact.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제41권1호
• /
• pp.30-36
• /
• 2015

Objectives: The aim of this study is to determine the incidence, location, and orientation of maxillary sinus septa in formalin embalmed cadavers. Materials and Methods: The study was conducted on 210 cadaveric heads available in our department. After taking the mid-sagittal section the specimens were opened from the medial aspect and the sinus sinus septa, their anatomical plane, location and dimensions. Results: The mean linear distance between maxillary sinus floor and its anatomical ostium was $26.76{\pm}5.21mm$ and $26.91{\pm}4.96mm$ on right and left side, respectively. A total of 59 maxillary sinus septa (28.1%) were observed in 210 maxillary specimens. Septae were most common, 33 septa (55.9%), in the middle region (between first and second molar tooth) of the sinus cavity. The maxillary sinus membrane (Schneiderian membrane) adhered tightly to the maxillary sinus and over the septae. Significantly more maxillary sinus septa were observed in edentulous maxillae in comparison to the dentate upper jaw. Conclusion: Knowledge of location of maxillary sinus ostium is mandatory for the rhinologist for drainage of secretions in maxillary sinusitis. The morphological details of maxillary sinus septa, particularly their location and anatomical planes, will guide dentists in performance of safe implant surgeries. The maxillary antrum septa of category I and II may complicate the procedure of inversion of bone plate and elevation of sinus membrane during maxillary augmentation surgeries. The category III septa observed in the sagittal plane were embedded by one of the branches of the infraorbital nerve in it, and if accidentally cut will lead to infraorbital nerve palsy in maxillary sinus surgeries.

• Imaging Science in Dentistry
• /
• 제50권2호
• /
• pp.175-180
• /
• 2020

Purpose: In this study, we used ultrasonography to monitor the use of hyaluronic acid (HA) as a filler in the face for esthetic reasons. We monitored changes in the filler shape, distribution, and relationship with adjacent anatomical structures over a 180-day period. Materials and Methods: Two patients each received an ultrasound-guided injection of HA, with different products and application sites for each patient. In 1 patient, the injection was administered in the angle of the mandible, while in the other, it was administered in the zygomatic region. The injection sites were monitored via ultrasonography at 24 hours, 30 days, and 180 days, at which times the imaging characteristics of the filler were observed. All injections were performed by the same professional, as were the ultrasound exams, which were conducted using the same equipment. Results: In both cases, the HA fillers were visualized using ultrasound at all time points. Some differences were observed between the cases in the images and the distribution of the pockets of filler. In 1 case, the filler appeared as a dark hypoechoic region with well-defined contours, and the material was observed to have moved posteriorly by the 180-day mark. In the other case, the material appeared hyperechoic relative to the previous case and presented no noticeable changes in its anteroposterior distribution over time. Conclusion: Based on these 2 cases, ultrasonography can be a complementary tool used to monitor facial fillers over the long term, allowing for the dynamic observation of different fillers.

• Imaging Science in Dentistry
• /
• 제42권3호
• /
• pp.155-161
• /
• 2012

Purpose: This study was performed to investigate the prevalence, morphology, and calcification pattern of the elongated styloid process in the Mathura population and its relation to gender, age, and mandibular movements. Materials and Methods: The study analyzed digital panoramic radiographs of 2,706 adults. The elongated styloid process was classified with the radiographic appearance based on the morphology and calcification pattern. The limits of mandibular protrusion were evaluated for each subject. The data were analyzed by using a Student's t-test and chi-squared test with significance set at p=0.05. Results: Bilateral elongation having an "elongated" type styloid process with a "partially mineralized" pattern was the most frequent type of styloid process. No correlation was found between styloid process type and calcification pattern on the one hand and gender on the other, although elongated styloid was more prevalent in older and male populations (p<0.05). Further styloid process elongation showed no effect on mandibular protrusive movement (p>0.05). Conclusion: Dentists should recognize the existence of morphological variation in elongated styloid process or Eagle syndrome apparent on panoramic radiographs. We found higher prevalence of elongated styloid process in the population of the Mathura region when compared with other Indian populations. The calcification of the styloid process was more common in the older age group with no correlation to gender, mandibular movement and site. "Type I" with a "partially calcified" styloid process was observed more frequently in the population studied.