• 대한치과교정학회지
• /
• 제27권3호
• /
• pp.445-456
• /
• 1997

본 연구는 안면비대칭이 존재하는 사람에 있어서 상악치열궁의 좌우측 치아에서 전후방, 측방 그리고 수직 비대칭의 존재 유무와 상악 중절치의 치축경사 변화 정도및 이러한 비대칭 양상과 하악골의 편위 정도와의 상관성을 알아보고 정상군과의 비교를 통하여 상대적인 비대칭의 양상을 파악하고자 고안되어졌다. 부산대학교병원 교정과에 내원한 환자들 중 하악골의 편위를 동반한 골격성 비대칭을 가진 21명을 안면비대칭군으로 선정하고 임상적으로 양호한 안모를 가지고 골격성의 비대칭이 없는 20명을 정상군으로 선정한 후 상악치열궁모형과 정모두부방사선규격사진을 이용하여 상악치열궁을 이루는 좌우측 치아의 위치와 상악 중절치 치축경사, 그리고 상악 제1대구치의 수직위치를 계측하고 분석하여 다음과 같은 결과를 얻었다. 1. 안면비대칭군에서 치성 비대칭의 정도와 하악의 편위정도 사이에는 높은 상관성을 나타내지 않았다. 2. 안면비대칭군에서 악골이 편위된 측의 치아들이 더 측방으로 확장되어 있었다. 그리고 상악 제1대구치와 제2대구치의 전후방위치와 상악 중절치의 치축경사에서 차이가 있었다. 3. 안면비대칭군에서 측방 비대칭은 후방치아로 갈수록 증가되었으며 전후방 비대칭에 비해 더 크게 나타났다.

• 대한치과교정학회지
• /
• 제48권6호
• /
• pp.357-366
• /
• 2018

Objective: The purpose of this study was to analyze the transverse dental compensation in reference to the maxillary and mandibular basal bones using cone-beam computed tomography (CBCT) and evaluate the correlations between transverse dental compensation and skeletal asymmetry variables in patients with skeletal Class III malocclusion and facial asymmetry. Methods: Thirty patients with skeletal Class I (control group; 15 men, 15 women) and 30 patients with skeletal Class III with menton deviation (asymmetry group; 16 men, 14 women) were included. Skeletal and dental measurements were acquired from reconstructed CBCT images using OnDemand3D 1.0 software. All measurements were compared between groups and between the deviated and nondeviated sides of the asymmetry group. Correlation coefficients for the association between skeletal and dental measurements were calculated. Results: Differences in the ramus inclination (p < 0.001), maxillary canine and first molar inclinations (p < 0.001), and distances from the canine and first molar cusp tips to the midmaxillary or midmandibular planes (p < 0.01) between the right and left sides were significantly greater in the asymmetry group than in the control group. In the asymmetry group, the ramus inclination difference (p < 0.05) and mandibular canting (p < 0.05) were correlated with the amount of menton deviation. In addition, dental measurements were positively correlated with the amount of menton deviation (p < 0.05). Conclusions: Transverse dental compensation was correlated with the maxillary and mandibular asymmetry patterns. These results would be helpful in understanding the pattern of transverse dental compensation and planning surgical procedure for patients with skeletal Class III malocclusion and facial asymmetry.

• 대한치과의사협회지
• /
• 제44권2호통권441호
• /
• pp.133-138
• /
• 2006

This is a report of one case about facial asymmetry involving maxilla & mandible. Le Fort I Maxillary Osteotomy & BSSRO is usually used for facial asymmetry patient involving maxilla & mandible. But Le Fort I Maxillary Osteotomy has demerits about more aggressive technique, more operation times, more discomforts of post operation nasal breathing than Unilateral maxillary Segmental Osteotomy. So we treated one patient successfully using Unilateral Maxillary Segmental Osteotomy, BSSRO & Post - Operation Rapid Orthodontics instead of Le Fort I Maxillary Osteotomy.

• Journal of Korean Dental Science
• /
• 제16권1호
• /
• pp.87-98
• /
• 2023

This report presents a case of successful treatment of skeletal Class III malocclusion with transverse discrepancy in adult by surgery-first approach. Traditionally dental decompensation is necessary prior to surgery in 2-jaw surgery to correct transverse and rotational discrepancy. However, the hyrax-type palatal expansion appliance was used to improve maxillary expansion accuracy and postoperative stability in this surgery-first approach (segmental Le Fort I osteotomy and mandibular setback surgery). It was established to be an effective means of precisely predicting postoperative occlusion and achieving stable retention after surgery of skeletal Class III malocclusion with maxillary transverse discrepancy.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.48.1-48.7
• /
• 2019

Background: Soft tissue asymmetry such as lip canting or deviation of the philtrum is an important influencing factor for unbalanced facial appearance. Lip canting could be improved by the correction of the occlusal canting or positional change of the mentum. Although there are many studies about changes of lip canting, however, postoperative changes of philtrum deviation have not been yet reported. In this study, we investigate the positional change of the philtrum after orthognathic surgery and influencing factors. Methods: Positional change of the philtrum was evaluated in 41 patients with facial asymmetry who underwent bimaxillary surgery, in relation to other anatomical soft tissue landmarks using a frontal clinical photo. The surgical movement of the maxillary and mandibular dental midline and canting were measured in postero-anterior cephalogram before and 1 day after surgery. The same procedure was repeated in patients with more than 1.5 mm perioperative change of the mandibular dental midline after bimaxillary surgery. Results: Maxillary dental midline shifting and canting correction did not have a significant correlation with lateral movement of the philtrum midline. However, the mandibular shift had a statistically significant correlation with a lateral movement of the philtrum (p < 0.05) as well as other linear parameters and angle values. Conclusion: The horizontal change of the philtrum is influenced by lateral mandibular movement in patients with facial asymmetry, rather than maxillary lateral movement.

• 대한치과교정학회지
• /
• 제50권4호
• /
• pp.278-289
• /
• 2020

Orthodontic treatment of posterior bite collapse due to early loss of molars and the consequent drift of adjacent teeth is complicated. When the posterior bite collapse occurs in patients with facial asymmetry, both transverse and vertical compensation are necessary for camouflage orthodontic treatment. In such cases, posterior maxillary segmental osteotomy (PMSO) can be an effective alternative procedure that simplifies the orthodontic treatment and shows long-term stability through dental compensation within the alveolar bone housing. This case report aimed to describe the orthodontic treatment of maxillary occlusal plane canting caused by severely extruded maxillary teeth in a patient with skeletal facial asymmetry that was corrected with PMSO along with protraction of the lower second molar to replace the space of the extracted first molar. The treatment duration was 18 months, and stable results were obtained after 2 years of retention.

• Imaging Science in Dentistry
• /
• 제41권1호
• /
• pp.39-42
• /
• 2011

Facial asymmetry is not an uncommon occurrence in day to day dental practice. It can be caused by various etiologic factors ranging from facial trauma to serious hereditary conditions. Here, we report a rare case of non-syndromic facial asymmetry in a young female, who was born with this condition but was not aware of the progression of asymmetry. No relevant family history was recognized. She was also deficient in both deciduous and permanent teeth in the corresponding region of maxilla. Hence, the cause of this asymmetry was believed to be a segmental odontomaxillary hypoplasia of left maxilla accompanied by agenesis of left maxillary premolars and molars and disuse atrophy of corresponding facial musculature. This report briefly discussed the comparative features of segmental odontomaxillary hypoplasia, hemimaxillofacial dysplasia, and segmental odontomaxillary dysplasia and justified the differences between segmental odontomaxillary hypoplasia and the other two conditions.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제37권6호
• /
• pp.539-544
• /
• 2011

Maxillary canting and vertical shortening of the unilateral mandibular ramus height is common in cases of severe facial asymmetry. Normally, mandibular distraction osteogenesis (DO) with horizontal osteotomy at the ascending ramus is used for vertical lengthening of the mandibular ramus to correct facial asymmetry with an absolute shortened ascending ramus. In this case report, vertical lengthening of the ascending ramus was performed successfully with unilateral DO and sagittal split ramus osteotomy (SSRO), where the posterior part of the distal segment can be distracted simultaneously in an inferior direction with maxillary DO, resulting in a lengthening of the medial pterygoid muscle. This case describes the acquired unilateral mandibular hypoplasia caused by a condylar fracture at an early age, which resulted in abnormal mandibular development that ultimately caused severe facial trismus. The treatment of this case included two-stage surgery consisting of bimaxillary distraction osteogenesis for gradual lengthening of the unilateral facial height followed by secondary orthognathic surgery to correct the transverse asymmetry. At the one year follow-up after SSRO, the vertical length was maintained without complications.

• Journal of Korean Dental Science
• /
• 제3권1호
• /
• pp.39-42
• /
• 2010

This case report presents a case that underwent three-piece segmental maxillary osteotomy and sagittal split ramus osteotomy on a patient with severe facial asymmetry accompanied by maxillary prognathism, severe left scissor bite, and chin point deviation. The resulting facial appearance and occlusion were improved, thereby three-piece segmental maxillary osteotomy is regarded effective methed in treating severe facial asymmetry.

• 대한치과교정학회지
• /
• 제44권3호
• /
• pp.143-153
• /
• 2014

An 8-years old boy with facial asymmetry and unilateral posterior crossbite on the left side received orthopedic and orthodontic treatment. During the first phase of treatment, the narrow maxillary arch was expanded using an acrylic plate. Then, the acrylic plate was used as a bite block with occlusal indentations from the construction bite that was obtained with the incisors in a coincident dental midline. After the position of the mandible was stabilized, the second phase of orthodontic treatment was initiated using fixed appliances for detailing of the occlusion. Skeletal symmetry, ideal occlusion, and coincident dental midlines were thus achieved. Functionally, occlusal force balance and masticatory muscle activity were improved, and the chewing patterns were normalized.