• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.2067_2068
• /
• 2009

Resistivity changes and intermetallic growth after thermal aging of Matter tin-plated copper sheet for current collector in fuel cell were investigated to survey the diffusion of Cu into Sn in interface and surface. The results show that the intermetallic growth and resistivity depended on thermal aging temperature and dwell time. In Sn plate on a Cu substrate, $Cu_6Sn_5({\mu})$ and $Cu_3Sn({\varepsilon})$ intermetallics layer were formed at plate/substrate interface. $Cu_6Sn_5({\mu})$ intermetallics layer gradually changed $Cu_3Sn({\varepsilon})$. Moreover Cu get through Sn layer and it was diffused in the surface at $200^{\circ}C$. On the other hand, only $Cu_3Sn({\varepsilon})$ intermetallics layer were formed at plate/substrate interface at $300^{\circ}C$. Consequently, the intermetallics formation, thermal condition and oxidation of surface, causes increase in the resistivity of Tin-plated copper sheet.

• 한국인쇄학회지
• /
• 제25권1호
• /
• pp.81-94
• /
• 2007

Recently, the trend in the printing industry includes shorter run lengths and with fast turnaround times. As new markets have made it possible to produce small quantities of high-quality color products at affordable price, the general commercial printing meets the customer's diverse demand by using spot color besides process four colors. Especially, by using spot color for printing the enterprise's logo or specific color, we can see the effect of printing is getting better. With the combination of the right software, ink, media, and device can be treated as a digital proofer for spot color printing, providing significant time and cost savings compared to conventional procedures. The objective of this study is to investigate the quality of spot color proofs printed by ink-jet and dye sublimation proofer using ICC-based color management system. An Epson Stylus Color 3000 ink-jet proofer combined with Best Color Proof XXL RIP was tested for glossy and matte paper. 3M Rainbow dye sublimation proofer was examined using 3M Rainbow controller ver. 4.1 RIP on the manufacturer recommended proofing paper. ICC profiles were generated for each device using ECI 2002 visual target and evaluated for the accuracy of process 4 color reproduction. The test charts consisting of Pantone color 1140 was selected to test the quality of spot color reproduction.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.794-802
• /
• 2000

Since the examination of CTOD problem revealed that the discrepancy among CTOD's was a matte., of definition, the relationships among parameters based on different definitions have been studied Particularly, the relationship between $\sigma$BS R-curve based on BS 7448 and R-curve based on the recently introduced $\sigma$5 parameter was investigated in this research. For the comparison, compact tension specimens of used 1Cr-0.5Mo steel, heat treated 1Cr-0.5Mo steel to mimic the new one, A12024-T6, and A12024-T351 were prepared and tested. Consequently, the relationship between $\sigma$5 and $\sigma$BS R-curves for tested materials were established by shifting the rotational center which could determined by rotation factor and ligament size.

• Journal of Hydrospace Technology
• /
• 제2권1호
• /
• pp.1-9
• /
• 1996

We consider the following two questions mainly in this study. First one is how the free surface hayes affect the lift of a shallowly submerged moving body. For this matte., we reinterpret the theoretical results of Kochin(1936), and point out that the high Froude number approximation is not always on the safer side. Second one is what sort of dimensionless parameters determine the occurrence of wave breaking behind a moving submerged body. Temporarily before getting a better answer, we propose that the two-parameter-plane, namely, the plane of the Froude number and the square root of the ratio of the submerged depth and the body length, may be used for predicting the possibility of wave breaking behind the submerged body. A region in the parameter plane is put forth as that of wave breaking, and the validity of this proposal is shown by its agreement with the existing experimental data of Parkin et al(1955) and those of Duncan(1983). Finally, linear and nonlinear numerical results are compared with the existing experimental data to see in what range of the parameters the linear and nonlinear theory case predict the wave field and the pressure on the body with reasonable accuracy. However, since the experimental data, which offer both the pressure and wave elevation for a submerged moving body, are very scarce, much cannot be attained through this comparative study. Hence, it is strongly recommended to carry out well planned experiments to get such data.

• 대한통합의학회지
• /
• 제4권2호
• /
• pp.13-22
• /
• 2016

Purpose: The purpose of this study was to determine the effects of the swissball exercise in combination with core muscle in beginner golfer. In general, the swiss ball exercise was related in the core muscle ability. Methods: The experiment was conducted with a total of 10 beginner golfer, and they were dicide into two groups: comparison group(n=5) and experimental group(n=5). In this research, the subjects of the comparison group performed the general matte exercise three times a week, for four weeks. The subjects of the experimental group performed the swiss ball exercise in combination with core muscle three times a week, for four weeks. Use the 7-iron and driver were measured head speed and distance of the comparison group and the experimental group, respectively. The collected data were analyzed by using the paired t-test and ANCOVA Results: The results of this study were as follows: 1) Swiss ball exercise in combination with core muscle revealed the significant improvements after corresponding exercise in golf performance capability. 2) Mat exercise was seen less better than the swiss ball exercises. Conclusion: This results suggested that it was improved the golfer shot performance of beginner proposes to see the Swiss combined movement.

• 한국축산시설환경학회지
• /
• 제5권1호
• /
• pp.63-72
• /
• 1999

This study was carried out to improve utilization of fly ash. Each animal waste was mixed with fly ash and composted This compost used at forage crops with corn, rye and alfalfa to examine to examine the fertilized efficiency and investigated productivity of forage crops, composition of this copmost and effect of fly ash on soil characteristics and composition. Content of organic matte, P2O5, K2O, CaO, MgO, Mn and B at the soil, which is given fly ash, increased. After the test crops were harvested, pH of the soil was maintained about 7 and contents of organic matter, phosphoric aicd, K, Mg, and B was increased at the soil of used fly ash. As fly ash was mixed, each DM yield of corn and rye was increased 10∼13% and 14∼21% especially alfalfa was increased 35% at the soil which is mixed fly ash with cage layer manure. As fly ash was mixed, each Crude protein (CP) of corn and rye was increased 6∼17% and about 29%, especially, as fly and cage layer manure was mixed CP of alfalfa was increased 33%. In conclusion, as fly ash is mixed with anlmal waste and use at forage crops, It makes the soil good and improve the productivity of forage crops.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.780-785
• /
• 2003

Recently the trends in information storage devices need small size, mobility, high capacity, and low power consumption etc. To satisfy those, the development of high performance actuator is an important issue. Compared with general linear actuator for optical disk drive, swingarm type rotary actuator is suitable to design in small form factor and has fast access time for random access. Swingarm actuator is designed considering the structural problem and the actuating force of VCM(Voice Coil Motor). The increase of mass caused by optical components makes vibration problems of swing-arm, therefore resonance frequency should be increased and inertia has to be reduced. ANSYS FEM tool is employed in optimizing swingarm. The VCM is designed using 3-D electro-magnetic analysis, and parameters of magnetic circuit are determined to matte large flux density. The large flux density enables to achieve low power consumption. VCM holder is designed to get the mass balance of total actuator and this balance reduces the magnitude of critical mode relative to pivot bearing, It is expected that swingarm type rotary actuator designed by this method is available to variable type of micro optical disk drives.

• 문화기술의 융합
• /
• 제4권1호
• /
• pp.325-329
• /
• 2018

실내 거주공간에는 건축 자재, 환기, 조리 등으로 인하여 많은 오염물질이 발생한다. 이중 미세먼지는 1급 발암물질로 인체에 매우 유해한 물질이며, 주로 조리시에 가장 많이 발생한다. 따라서 실내공기질을 잘 관리하기 위해서는 조리시 발생하는 미세먼지의 농도와 환기방법과의 관계를 평가할 필요가 있다. 이에 본 연구에서는 음식물의 종류 및 환기방법에 따른 미세먼지(PM2.5)의 농도변화를 측정하고 분석하여, 주방 조리시 발생하는 미세먼지의 관리방안을 제시하고자 하였다.

• 펄프종이기술
• /
• 제45권6호
• /
• pp.36-43
• /
• 2013

Effects of blending of PCC manufactured with emission gas occurred at mill on the characteristics of coating color, optical and printing properties of coated paper were investigated in order to evaluate the possibility of its use as a raw material for producing environmentally friendly coated paper. Low shear viscosity and water retention value of ground PCC 1(d50 = $6.303{\mu}m$) were higher than those of ground PCC 2(d50 = $3.149{\mu}m$). Ink set properties of ground PCC 1 and ground PCC 2 were inferior to that of PCC 3. Thus, the reducing of particle size was required in order to overcome the inferior ink set properties. Ground PCC 1 had a similar properties to clay, and it showed the possibility that ground PCC 1 could be used to produce matte grade coated papers. However, it was required to improve the stability(particle shape, particle size, and compatibility with chemicals used in coating color formulation) in the case of blending with GCC in order to keep the qualities of coated paper.

• 인터넷정보학회논문지
• /
• 제7권2호
• /
• pp.1-8
• /
• 2006

본 논문은 포스트프로덕션부분에 해당되는 실무적인 영상제작 작업과정중의 하나로 효과적인 합성 기법에 대해 연구하였다. 영상합성의 전체적인 흐름을 인식하지 못하고 구체적인 합성방식에 대한 다양성과 복잡성에 대한 연구가 미비한 상태이다. 그러므로 영상의 흐름을 이해 할 수 있는 전체적인 패턴을 형상화하고 규격화의 필요성이 요구된다. 따라서 실제로 구현해 보기 위해서는 리소스라는 형식으로 자료화하여 작업의 효율성과 편이성을 높이는 것이 바람직 할 것이다. 영상작업을 하는데 있어 매트, 키, 모션, 스케일, 포지션, 불투명도(opacity)등등과 같은 여러 가지 속성 값들을 그래픽 이미지로 제시함으로써 이전에 개인의 몫으로 주어졌던 영상합성시의 어려움을 해결할 수 있는 방향을 제시하고 구체적인 사례들을 통해 입증하였다.