• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.12
• /
• pp.1928-1934
• /
• 1993

This paper presents a fast algorithm of integer discrete cosine transform(IDCT) allowing VLSI implementation by integer arithmetic. The proposed fast algorithm has been developed using Chen`s matrix decomposition in DCT, and requires less number of arithmetic operations compared to the IDCT. In the presented algorithm, the number of addition number is the same as the one of Chen`s algorithm if DCT, and the number of multiplication if the same as that in DCT at N=8 but drastically decreasing when N is above 8. In addition, the drawbacks of DCT such as performance degradation at the finite length arithmetic could be overcome by the IDCT.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1614-1616
• /
• 1999

Epoxy resin has been used as matrix resin of advanced composites owing to ideally suitable properties and inherent physical and chemical properties for electrical and electronic insulation. In this paper, in order to evaluate the performance of epoxy composites for out door insulation, variations of tracking resistance were investigated on the complex ageing parameter. Also, IPN methods were introduced in order to improve performance for out door use. As a result, it was confirmed that tracking resistance were degraded with complex ageing parameters. But, it was confirmed that specimen of IPN structure have the better tracking resistance properties than SIN structure by moisture absorption aging.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.4
• /
• pp.96-99
• /
• 1995

Under signal range mismatch, the LCMV beamformer has the performance degradation to cancel a desired signal. Using the eigenstructure properties of the array covariance matrix, we investigate the cause of this problem. From this investigation, a robust beamformer to source range mismatch is presented. The proposed beamformer has the maximum output signal-to-noise ration (SNR). When a desired signal is in a far field, the weight vector of the proposed beamformer is not biased.

• KSBB Journal
• /
• v.13 no.3
• /
• pp.223-230
• /
• 1998

Experiments for lignin peroxidase production have been conducted by aerobic fermentation of Phanerochaete chrysosporium under low shear rate and enriched oxygen environment. The result of flask cultures of white rot fungus indicated that high oxygen concentration and low shear force were essential for enhancement of lignin peroxidase production. Pentachlorophenol was readily degraded by lignin peroxidase produced in nutrient limited flask cultures. Polyurethane foam was fond to be an effective immobilization matrix of P. chrysosporium.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1991.10a
• /
• pp.29-32
• /
• 1991

It is well known that the fatigue damage process in composite materials is very complicated due to complex failure mechanisms that comprise debounding, matrix cracking, delamination and fiber splitting of laminates. Therefore, the residual strength, instead of a single dominant crack length, is chosen to describe the criticality of the damage accumulated in the sublaminate. In this study, two models for residual strength degradation established by Yang-Liu and Tanimoto-Ishikawa that are capable of predicting the statistical distribution of both fatigue life and residual strength have been investigated and compared. Statistical methodologies for fatigue life prediction of composite materials have frequently been adopted. However, these are usually based on a simplified probabilistic approach considering only the variation of fatigue test data. The main object of this work is to propose a fatigue reliability analysis model which accounts for the effect of all sources of variation such as fabrication and workmanship, error in the fatigue model, load itself, etc. The proposed model is examined using the previous experimental data of GFRP and it is shown that it can be practically applied for fatigue problems in composite materials.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.05a
• /
• pp.122-125
• /
• 2001

The objective of this research is to develop hybridized yarns for thermoplastic composites, and to examine tile effect of cooling rate on mechanical properties of the composites. The co-braided yarn utilizing carbon fibers as reinforcements and Nylon 66 fibers as matrix materials has been fabricated. Thermoplastic composites have been manufactured by the hot-press forming process. For the processing conditions, cooling rates of $-2.5^{\circ}C$/min and $-60^{\circ}C$/min have been considered. Three-point bending test and losipescu shear test were performed to investigate the effect of the cooling rate and the surface treatment of carbon fibers. SEM photographs were used to investigate the fracture surfaces of the tested samples. The cooling rate of $-60^{\circ}C$/min resulted in the higher strength and elastic modulus for bending and shear tests. The composites of the epoxy-sized carbon fibers showed the lowest strength due to the degradation of the sizing material during the thermoforming process.

• Korea-Australia Rheology Journal
• /
• v.13 no.2
• /
• pp.61-65
• /
• 2001

Thermoplastic nanocomposites based on the copolymers of polypropylene (PP)-polystyrene (PS) and organically modified montmorillonite (org-MMT) were produced by using power ultrasonic wave in an intensive mixer. Owing to the unique action of the ultrasonic wave, free radicals of styrene monomers and macroradicals of PP were generated, by which copolymers of PP and PS were formed. Another important aspect of using ultrasonic wave during the mixing process was to enhance nano-scale dispersion of org-MMT by destructing the agglomerates of org-MMT in the polymer matrix. Optimum conditions for the in-situ copolymerization and melt intercalation were studied with various concentrations of styrene monomer, sonication time and different kinds of clay. It was found that a novel attempt carried out in this study yielded further improvement in the mechanical performance of the nanocomposites compared to those produced by the conventional melt mixing process.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.3
• /
• pp.299-305
• /
• 1995

Visible photoluminescing (PL) silicon at room temperature has been prepared by a dry technique, that is, by spark processing, contrary to anodically etched porous silicon. PL peak maximum of photoluminescing spark processed Si was shifted to blue 520 nm. The stability of spark processed Si towards degradation upon UV radiation was found to be extremely high. Results from high resolution TEM, XRD and XPS studies suggest that spark processed silicon involves minute nanocrystalline (polycrystalline) particles which are imbedded in an amorphous matrix, preferably $SiO_2$.

• Rapid Communication in Photoscience
• /
• v.3 no.4
• /
• pp.64-66
• /
• 2014

Synthesis of a deuterium-labeled derivative of nitrospirobenzopyran (NSP), one of representative photochromic compounds, has been described. Four deuteriums were successfully introduced on 1-methyl and ${\alpha}$-methyne relative to spiro-carbon in the title compound with more than 95atom%D purity. Main photodegraded products of NSP were two oxindoles in acetonitrile, and additional products were formed in poly(isobutyl-methacrylate) films possibly due to restricted molecular motion in polymer matrix. Quantitative HPLC analysis revealed that partial introduction of deuterium to NSP brought a noticeable isotope effect, recognizable enhancement in photo-resistivity of NSP, i.e.,8.3% in solutions and 29% in polymeric films.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.245-252
• /
• 1996

$\lambda$/4 phase-shifted DFB lasers with nonideal grating structure have been studied by using an effective-index transfer matrix method where material dispersion, vwaveguide dispersion and waveguide-structuredependent loss are taken into consideration. Nonideal grating structure in the center phase-shift region does not incur serous degradation of laser characteristics. Phase-shift error from the ideal shift of $\pi$ causes a decrease in the threshold gain difference and lasing wavelength shift and should be less than $\pi$/4 when residual facet reflectivity is 0.7%. also, positional error of the phase-shift should be less than 9% of the cavity length in order for the threshold gain difference to be decreased less than 10%.