• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.361-365
• /
• 2002

Advancements in silicon phase control (SCR) technologies provide an arc welding power supply that has the capability to allow the alteration of the Alternating Current (AC) welding output. These technologies provide a square wave output involving sixteen frequency selections and multiple balance selections. While an AC out put is known to minimize magnetic disturbances associate with Direct Current (DC), the potentials of a non-sinusoidal waveform have not been explored. The focus of the paper is to determine the effects that the frequency and balance of an AC wave form output will have upon a high speed Submerge Arc (SAW) application. The test matrix of the project includes welding .250" steel plate. Joint type is square groove with a travel speed of 65 IPM. Each of the weld parameters was held constant, only the frequency and/or balance were altered between welds. Each frequency/balance combination involved three-gap spacing. Upon completion of the welds the bead profiles were measured and recorded. A relationships/trends were observed with various frequency and balance values. Optimum frequency and balance values were found for the .250" square groove application which permit consistent weld sizing, ease of slag removal, and minimal plate distortion.

• Journal of Biosystems Engineering
• /
• v.10 no.2
• /
• pp.19-26
• /
• 1985

This study was carried out to develop a versatile data acquisition/processing system for overall tractor performance utilizing a NEC PC-8001 microcomputer. The data acquisition system measures drawbar pull and power, wheel torque and axle power, ground speed, wheel slip, fuel flow, and engine speed. The system stores hexadecimal data for these variables in memory. Upon completion of each test run, all hexadecimal data stored in memory are recorded on floppy disc. The data processing system reads in the data collected on floppy disc and interprete them using several graphical and statistical techniques. The system uses the same microcomputer and a dot-matrix printer. The data acquisition system has been installed on a GOLDSTAR 500 tractor (2WD, 50 ps). A field study has shown that tractor performance data can be quickly and easily collected. It also appeared that the data processing system can be used to efficiently analyze the collected data. The data acquisition system has some troublesome in mounting and handling on tractor since it uses a general-purpose computer consisting of several components.

• Archives of Plastic Surgery
• /
• v.48 no.2
• /
• pp.179-184
• /
• 2021

Women attach great importance to the presence of a three-dimensional nipple upon completion of the breast reconstruction process. To meet patients' expectations, nipple-areolar complex reconstruction should achieve symmetry in position, size, shape, texture, and color, as well as minimizing donor-site morbidity. However, it is well known that regardless of the reconstructive technique, loss of nipple projection can be reasonably expected. We developed and evaluated a quick, simple, and innovative technique using injectable Integra Flowable Wound Matrix to increase nipple projection after reconstruction. Twenty breast cancer patients who underwent nipple reconstruction resulting in unsatisfactory projection were enrolled in our retrospective study. Nipple projection was measured at the time of surgery and after 6 and 12 months. A visual analogue scale was used to assess patients' satisfaction. Our technique yielded reliable results in terms of the long-lasting maintenance of nipple projection. This method is high-priced, but cost-effective, since one kit may suffice for three patients. Furthermore, our patients were very appreciative of this technique as a single-step, minimally invasive, painless procedure with no reported necessity of re-intervention.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.201-205
• /
• 2004

In these several years, as many people have been attracted by the functional cosmetics, there are a lot of study to enhance the stability of active ingredients for light, heat, oxygen, etc. in the academic and industrial field. Especially, catechin is well known as strong anti-oxidant, anti-inflammatory and reducing agent for oxidative stress but it is very unstable for light, heat, oxygen. etc. In this study, the stability and skin penetration of catechin are improved by 3-dimensional method. As I-dimension, porous silica is prepared using sol-gel method, and then catechin is adsorbed in pores of silica. As 2-dimension, solid lipid nanoparticles (SLN) are obtained using non-phospholipid vesicles. Finally 3-dimension is completion through lamellar phase self-organization that combines SLN catechin with skin lipid matrix. We used laser light scattering system, cyro-SEM, chromameter, HPLC and image analyzer to analyze our 3-dimentional systems. According to chromameter date, the color stability of 3-dimensional catechin is enhanced by 5-10 times compared with general liposome systems. We also confirmed through HPLC analysis that 3-dimensional catechin is more long lasting. The effect of skin penetration and wrinkle reduction are improved, too.

• Korean journal of applied entomology
• /
• v.50 no.3
• /
• pp.235-245
• /
• 2011

Temperature-related parameters of Panonychus citri (McGregor) (Acarina: Tetranychidae) development were estimated and a stage-structured matrix model was developed. The lower threshold temperatures were estimated as $8.4^{\circ}C$ for eggs, $9.9^{\circ}C$ for larvae, $9.2^{\circ}C$ for protonymphs, and $10.9^{\circ}C$ for deutonymphs. Thermal constants were 113.6, 29.1, 29.8, and 33.4 degree days for eggs, larvae, protonymphs, and deutonymphs, respectively. Non-linear development models were established for each stage of P. citri. In addition, temperature-dependent total fecundity, age-specific oviposition rate, and age-specific survival rate models were developed for the construction of an oviposition model. P. citri age was categorized into five stages to construct a matrix model: eggs, larvae, protonymphs, deutonymphs and adults. For the elements in the projection matrix, transition probabilities from an age class to the next age class or the probabilities of remaining in an age class were obtained from development rate function of each stage (age classes). Also, the fecundity coefficients of adult population were expressed as the products of adult longevity completion rate (1/longevity) by temperature-dependent total fecundity. To evaluate the predictability of the matrix model, model outputs were compared with actual field data in a cool early season and hot mid to late season in 2004. The model outputs closely matched the actual field patterns within 30 d after the model was run in both the early and mid to late seasons. Therefore, the developed matrix model can be used to estimate the population density of P. citri for a period of 30 d in citrus orchards.

• Journal of Korean Philosophical Society
• /
• v.147
• /
• pp.117-146
• /
• 2018

This paper discusses, whether religion is possible even in the age of artificial intelligence, and whether humans alone are the subject of religious faith or ultra intelligent machines with human minds can be also subjects of faith. In order for ultra intelligent machines to be subjects of faith in the same conditions as humans, they must be able to have unique characteristics such as emotion, will, and self-consciousness. With the advent of ultra intelligent machines with the same level of cognitive and emotional abilities as human beings, the religious actions of artificial intelligence will be inevitable. The ultra intelligent machines after 'singularity' will go beyond the subject of religious belief and reign as God who can rule humans, nature and the world. This is also the common view of Morabeck, Kurzweil and Harari. Leonhart also reminds us that technological advances should make us used to the fact that we are now 'gods'. But we fear we may face distopia despite the general affluence of the 'Star Trec' economy. For this reason, even if a man says he has learned the religious truth, one can't help but wonder if it is true. Kant and Bloch are thinkers who critically reflected on our religious ideals and highest concept in different world-view premises. Kant's concept of God as 'idea of pure reason' and 'postulate of practical reason', can seem like a 'god of gap' as Jesse Bering said earlier. Kant recognized the need for religious faith only on a strict basis of moral necessity. The subjects of religious faith should always strive to do the moral good, but such efforts themselves were not enough to reach perfection and so postulated immortality of the soul. But if an ultra intelligent machines that has emerged above a singularity is given a new status in an intellectual explosion, it can reach its morality by blocking evil tendencies and by the infinite evolution of super intelligence. So it will no longer need Kant's 'Postulate for continuous progress towards greater goodness', 'Postulate for divine grace' and 'Postulate for infinite expansion of the kingdom of God on earth.' Artificial intelligence robots would not necessarily consider religious performance in the Kant's meaning, and therefore religion will also have to be abolished. Ernst Bloch transforms Kant's postulate to be Persian dualism. Therefore, in Bloch, even though the ultra intelligent machines is a divine being, one must critically ask whether it is a wicked or a good God. Artificial intelligence experts warn that ultra intellectual machine as Pandora's gift will bring disaster to mankind. In the Kant's Matrix, a ultra intelligent machines, which is the completion of morality and God itself, may fall into a bad god in Bloch's Matrix. Therefore, despite the myth of singularity, we still believe that ultra intelligent machines, whether as God leads us to the completion of one of our only religious beliefs, or as bad god to the collapse of mankind through complete denial of existence.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.2 no.1
• /
• pp.102-131
• /
• 1974

The author's thesis is that the types used for the large-sized characters seen in the two metal type-printed books "Kyosik chubopop karyong"(交食推步法假令) and "Yok-hak kemong yohae"(易學啓蒙要解) both printed in 1458 belong to a new metal font hitherto unnamed. The former book was compiled by Yi Sun-ji(李純之) and Kim Sok-je(金石梯) in January of 1458 in accordance to King Sejo's order. A new font was created to be used for the large-sized characters of the book. Several. months after completion of the compilation, the book was printed with mixed use of the new font and the Kabin-ja(甲寅字) for medium- and small-sized characters. The latter book had been written by King Sejo before his accession to the throne. Ascending the throne the king had his scholar-subjects examine the writing to correct it where necessary. The examination was completed in July of 1458 and printing was immediately done with the two fonts the above-mentioned, new font for the large-sized letters and the Kabin-ja for the medium- and small-sized ones. The books were granted to the scholar-subjects and the students of the Sung Kyun Kwan Academy as a royal gift. The matrix seems to have been modeled after the calligraphy of King Sejo. Because the new font was created to print the large-sized letters of the two books in 1458, it may be proper to name it "Muin-ja" using the "kanji"(干支) of the year. The author is happy to identify and include another font in the list of Korean movable types as a result of the present study.

• Journal of Plant Biotechnology
• /
• v.37 no.2
• /
• pp.196-204
• /
• 2010

With the completion of genome sequencing of several organisms, attention has been focused to determine the function and functional network of proteins by proteome analysis. The recent techniques of proteomics have been advanced quickly so that the high-throughput and systematic analyses of cellular proteins are enabled in combination with bioinformatics tools. Furthermore, the development of proteomic techniques helps to elucidate the functions of proteins under stress or diseased condition, resulting in the discovery of biomarkers responsible for the biological stimuli. Ultimate goal of proteomics orients toward the entire proteome of life, subcellular localization, biochemical activities, and their regulation. Comprehensive analysis strategies of proteomics can be classified as three categories: (i) protein separation by 2-dimensional gel electrophoresis (2-DE) or liquid chromatography (LC), (ii) protein identification by either Edman sequencing or mass spectrometry (MS), and (iii) quanitation of proteome. Currently MS-based proteomics turns shiftly from qualitative proteome analysis by 2-DE or 2D-LC coupled with off-line matrix assisted laser desorption ionization (MALDI) and on-line electrospray ionization (ESI) MS, respectively, to quantitative proteome analysis. Some new techniques which include top-down mass spectrometry and tandem affinity purification have emerged. The in vitro quantitative proteomic techniques include differential gel electrophoresis with fluorescence dyes, protein-labeling tagging with isotope-coded affinity tag, and peptide-labeling tagging with isobaric tags for relative and absolute quantitation. In addition, stable isotope labeled amino acid can be in vivo labeled into live culture cells through metabolic incorporation. MS-based proteomics extends to detect the phosphopeptide mapping of biologically crucial protein known as one of post-translational modification. These complementary proteomic techniques contribute to not only the understanding of basic biological function but also the application to the applied sciences for industry.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2006.11a
• /
• pp.55-64
• /
• 2006

The fetal central nervous system (CNS) is sensitive to diverse environmental factors, such as alcohol, heavy metals, irradiation, mycotoxins, neurotransmitters, and DNA damage, because a large number of processes occur during an extended period of development. Fetal neural damage is an important issue affecting the completion of normal CNS development. As many concepts about the brain development have been recently revealed, it is necessary to compare the mechanism of developmental abnormalities induced by extrinsic factors with the normal brain development. To clarify the mechanism of fetal CNS damage, we used one experimental model in which 5-azacytidine (5AZC), a DNA damaging and demethylating agent, was injected to the dams of rodents to damage the fetal brain. 5AzC induced cell death (apoptosis)and cell cycle arrest in the fetal brain, and it lead to microencephaly in the neonatal brain. We investigated the mechanism of apoptosis and cell cycle arrest in the neural progenitor cells in detail, and demonstrated that various cell cycle regulators were changed in response to DNA damage. p53, the guardian of genome, played a main role in these processes. Further, using DNA microarray analysis, tile signal cascades of cell cycle regulation were clearly shown. Our results indicate that neural progenitor cells have the potential to repair the DNA damages via cell cyclearrest and to exclude highly affected cells through the apoptotic process. If the stimulus and subsequent DNA damage are high, brain development proceeds abnormally and results in malformation in the neonatal brain. Although the mechanisms of fetal brain injury and features of brain malformation afterbirth have been well studied, the process between those stages is largely unknown. We hypothesized that the fetal CNS has the ability to repair itself post-injuring, and investigated the repair process after 5AZC-induced damage. Wefound that the damages were repaired by 60 h after the treatment and developmental processes continued. During the repair process, amoeboid microglial cells infiltrated in the brain tissue, some of which ingested apoptotic cells. The expressions of genes categorized to glial cells, inflammation, extracellular matrix, glycolysis, and neurogenesis were upregulated in the DNA microarray analysis. We show here that the developing brain has a capacity to repair the damage induced by the extrinsic stresses, including changing the expression of numerous genes and the induction of microglia to aid the repair process.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.4
• /
• pp.3-11
• /
• 2010

Currently the quality of construction drawings is deteriorated due to restrictions on time costs allowed to the design phase. Moreover shop drawings are arbitrarily produced without the standard criteria, and cleared off after the completion of construction. As a result, the information of produced shop drawings is not feedback to the design phase, and the quality of the construction drawings become worse. This study proposes checklists that include information requested at construction sites and the shop drawings as well as the existing checklists for the construction drawings. The checklists integrate designer's check-items according to breakdown of drawings and contractor's check-items base don construction process. Index matrices of the integrated checklists is developed for practical application of the checklists, and validated through intensive interview with design and construction practitioners.