• The Journal of Korean Society for Radiation Therapy
• /
• v.11 no.1
• /
• pp.16-21
• /
• 1999

Purpose : The aim of this study is to conform the possibility of the liquid type EPID as a QC tools to clinical indication and of replacement of the film dosimetry. Aditional aim is to describe a procedure for the use of a EPID as a physics calibration tool in the measurements of radiation beam parameters which are typically carried out with film. Method & Materials : In this study we used the Clinac 2100c/d with EPID. This system contains 65536 liquid-filled ion chambers arranged in a $256{\times}256$ matrix and the imaging area is $32.5{\times}32.5cm$ with liquid layer thickness of 1mm. The EPID was tested for different field sizes under typical clinical conditions and pixel values were calibrated against dose by producing images using various thickness of lead attenuators(lead step wedge) using 6 & 10MV x-ray. We placed various thickness of lead on the table of linear accelerator and set the portal vision an SDD of 100cm. To acquire portal image we change the field size and energy, and we recorded the average pixel value in a $3{\times}3$ pixel region of interest(ROI) at field center was recorded. The pixel values were also measured for different field sizes in order to evaluate the dependence of pixel value on x-ray energy spectrum and various scatter components. Result : The EPID, as a whole, was useful as a QA tool and dosimetry device. In mechanical check, cross-hair centering was well matched and the error was less than ?2mm and light/radiation field coincidence was less than 1mm also. In portal dosimetry the wider the field size the the higher the pixel value and as the lead thickness increase, the pixel value was exponentially decreased. Conclusions : The EPID was very suitable for QA tools and it can be used to measure exit dose during patients treatment with reasonable accuracy. But when indicate the EPID to clincal study deep consideration required

• Journal of the Economic Geographical Society of Korea
• /
• v.13 no.3
• /
• pp.457-469
• /
• 2010

The study aims to estimate interregional trade coefficient of service industry using the gravity model. The gravity model has been widely used for prediction of the level of human interaction between two regions which is positively related to attraction of them and negatively related to the distance between them. To apply the gravity model for explaining the interregional trade flow of service industry, the choice of proper proxy variables which represent a dependent variable and independent variables is most important. However, the literature shows that there are few studies on this issue. Four models concerned to the choice of proxy variables are considered. Finally, this paper employs the least-squares regression analysis to test the model's goodness-of-fit, and suggests the most appropriate model based on the result from the analysis. The result shows that the interregional trade of service industry in regional input-output table developed by The Bank of Korea is desirable as a dependent variable, the service industry output of export region, the population of import region, and the spatial distance between regions are desirable as independent variables.

• Interaction and multiscale mechanics
• /
• v.2 no.1
• /
• pp.69-89
• /
• 2009

Reinforced and prestressed concrete (RC and PC) thin walls are crucial to the safety and serviceability of structures subjected to shear. The shear strengths of elements in walls depend strongly on the softening of concrete struts in the principal compression direction due to the principal tension in the perpendicular direction. The past three decades have seen a rapid development of knowledge in shear of reinforced concrete structures. Various rational models have been proposed that are based on the smeared-crack concept and can satisfy Navier's three principles of mechanics of materials (i.e., stress equilibrium, strain compatibility and constitutive laws). The Cyclic Softened Membrane Model (CSMM) is one such rational model developed at the University of Houston, which is being efficiently used to predict the behavior of RC/PC structures critical in shear. CSMM for RC has already been implemented into finite element framework of OpenSees (Fenves 2005) to come up with a finite element program called Simulation of Reinforced Concrete Structures (SRCS) (Zhong 2005, Mo et al. 2008). CSMM for PC is being currently implemented into SRCS to make the program applicable to reinforced as well as prestressed concrete. The generalized program is called Simulation of Concrete Structures (SCS). In this paper, the CSMM for RC/PC in material scale is first introduced. Basically, the constitutive relationships of the materials, including uniaxial constitutive relationship of concrete, uniaxial constitutive relationships of reinforcements embedded in concrete and constitutive relationship of concrete in shear, are determined by testing RC/PC full-scale panels in a Universal Panel Tester available at the University of Houston. The formulation in element scale is then derived, including equilibrium and compatibility equations, relationship between biaxial strains and uniaxial strains, material stiffness matrix and RC plane stress element. Finally the formulated results with RC/PC plane stress elements are implemented in structure scale into a finite element program based on the framework of OpenSees to predict the structural behavior of RC/PC thin-walled structures subjected to earthquake-type loading. The accuracy of the multiscale modeling technique is validated by comparing the simulated responses of RC shear walls subjected to reversed cyclic loading and shake table excitations with test data. The response of a post tensioned precast column under reversed cyclic loads has also been simulated to check the accuracy of SCS which is currently under development. This multiscale modeling technique greatly improves the simulation capability of RC thin-walled structures available to researchers and engineers.

• Journal of Technology Innovation
• /
• v.22 no.3
• /
• pp.1-35
• /
• 2014

This study analyzed convergence status among input technologies used in technology development with Technology I-O analysis. It was another version of industry input-output analysis which is used in technology planning. This case is an analysis of association between technology an product. The subjects of analysis were 401 tasks that applied to '2012 Convergence Technology Development Project for Small and Medium Businesses' promoted by Korea Technology & Information Promotion Agency for Small and Medium Enterprises. The process of analysis is as followed. First step, we made a matrix table as an input of technology input-output analysis. Input was defined by technology and output was defined by the product. Input technology was defined in a 3-digit code under National Science Technology Classification and output products were defined in a 5-digit under National Standard Industry Code. Second, the Spillover ratio among technologies were calculated and was used to make a picture of technology linkage. As a result of analysis, technology spillover of embedded S/W was the highest in IT convergence, mold product in ET convergence, and functional cosmetics development technology in BT convergence. In general, IT convergence had many element technologies with high technology spillover, and ET had a small number of element technologies with high technology spillover. Therefore, investment effect of element technology is expected to be large if investment on element technologies with high technology spillover is important for vitalizing convergence.

• Journal of Korean Society of Forest Science
• /
• v.59 no.1
• /
• pp.1-8
• /
• 1983

Classification on the group of Salix pseudo-lasiogyne growing in Korea, was conducted using cluster analysis, factor analysis, and principal component analysis. Thirty-six characters(Table 2) of the 5 basis species were measured. The phenograms and ordination plot showing the relationships between the species were made by applying the cluster analysis and principal component analysis. Five important factors, such as leaf blade width, number of right serration, angle of leaf apex, number of flowers in an ament, and the ratio of petiole length to width, were inferred from the rotated factor matrix, and their state values were presented in polygonal diagram. Salix pseduo-lasiogyne and S. babylonica were similarly correlated and linked in one group, S. dependens and S. matsudana for tortuosa were secondarily linked in the other group. S. koreensis appeared as an aliemated species from each of the two groups.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.3
• /
• pp.64-77
• /
• 2015

An effective method for produce munitions effectiveness data is to calculate weapon effectiveness indices in the US military's Joint Munitions Effectiveness Manuals (JMEM) and take advantage of the damage evaluation model (GFSM) and weapon Effectiveness Evaluation Model (Matrix Evaluator). However, a study about the Range Safety that can be applied in the live firing exercises is very insufficient in the case of ROK military. The Range Safety program is an element of the US Army Safety Program, and is the program responsible for developing policies and guidance to ensure the safe operation of live-fire ranges. The methodology of Weapon Danger Zone (WDZ) program is based on a combination of weapon modeling/simulation data and actual impact data. Also, each WDZ incorporates a probability distribution function which provides the information necessary to perform a quantitative risk assessment to evaluate the relative risk of an identified profile. A study of method to establish for K-Range Safety data is to develop manuals (pamphlet) will be a standard to ensure the effective and safe fire training at the ROK military education and training and environmental conditions. For example, WDZs are generated with the WDZ tool as part of the RMTK (Range Managers Tool Kit) package. The WDZ tool is a Geographic Information System-based application that is available to operational planners and range safety manager of Army and Marine Corps in both desktop and web-based versions. K-Range Safety Program based on US data is reflected in the Korean terrain by operating environments and training doctrine etc, and the range safety data are made. Thus, verification process on modified variables data is required. K-Range Safety rather than being produced by a single program, is an package safety activities and measures through weapon danger zone tool, SRP (The Sustainable Range Program), manuals, doctrine, terrain, climate, military defence M&S, weapon system development/operational test evaluation and analysis to continuously improving range safety zone. Distribution of this K-range safety pamphlet is available to Army users in electronic media only and is intended for the standing army and army reserve. Also publication and distribution to authorized users for marine corps commands are indicated in the table of allowances for publications. Therefore, this study proposes an efficient K-Range Safety Manual producing to calculate the danger zones that can be applied to the ROK military's live fire training by introducing of US Army weapons danger zone program and Range Safety Manual

• The Korean Journal of Applied Statistics
• /
• v.5 no.2
• /
• pp.243-254
• /
• 1992

In the present study two sets of unbalanced two-way cross-classification data with and without empty cell(s) were used to evaluate empirically the various sums of squares in the analysis of variance table. Searle(1977) and Searle et.al.(1981) developed a method of computing R($\alpha$\mid$\mu, \beta$) and R($\beta$\mid$\mu, \alpha$) by the use of partitioned matrix of X'X for the model of no interaction, interchanging the columns of X in order of $\alpha, \mu, \beta$ and accordingly the elements in b. An alternative way of computing R($\alpha$\mid$\mu, \beta$), R($\beta$\mid$\mu, \alpha$) and R($\gamma$\mid$\mu, \alpha, \beta$) without interchanging the columns of X has been found by means of,$(X'X)^-$ derived, using $W_2 = Z_2Z_2-Z_2Z_1(Z_1Z_1)^-Z_1Z_2$. It is true that $R(\alpha$\mid$\mu,\beta,\gamma)\Sigma = SSA_W and R(\beta$\mid$\mu,\alpha,\gamma)\Sigma = SSB_W$ where $SSA_W$ and means analysis and $R(\gamma$\mid$\mu,\alpha,\beta) = R(\gamma$\mid$\mu,\alpha,\beta)\Sigma$ for the data without empty cell, but not for the data with empty cell(s). It is also noticed that for the datd with empty cells under W - restrictions $R(\alpha$\mid$\mu,\beta,\gamma)_W = R(\mu,\alpha,\beta,\gamma)_W - R(\mu,\alpha,\beta,\gamma)_W = R(\alpha$\mid$\mu) and R(\beta$\mid$\mu,\alpha,\gamma)_W = R(\mu,\alpha,\beta,\gamma)_W - R(\mu,\alpha,\beta,\gamma)_W = R(\beta$\mid$\mu) but R(\gamma$\mid$\mu,\alpha,\beta)_W = R(\mu,\alpha,\beta,\gamma)_W - R(\mu,\alpha,\beta,\gamma)_W \neq R(\gamma$\mid$\mu,\alpha,\beta)$. The hypotheses $H_o : K' b = 0$ commonly tested were examined in the relation with the corresponding sums of squares for $R(\alpha$\mid$\mu), R(\beta$\mid$\mu), R(\alpha$\mid$\mu,\beta), R(\beta$\mid$\mu,\alpha), R(\alpha$\mid$\mu,\beta,\gamma), R(\beta$\mid$\mu,\alpha,\gamma), and R(\gamma$\mid$\mu,\alpha,\beta)$ under the restrictions.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.5
• /
• pp.1-14
• /
• 2021

Excessive development and urbanization have destroyed animal, plant, habitats and reduced biodiversity. In order to preserve species diversity, habitat prediction studies are have been conducted at home and overseas using various modeling techniques. This study was conducted to suggest optimal habitat modeling research by comparing HSI and MaxEnt, which are widely used among habitat modeling techniques. The study was targeted on the endangered species of Prionailurus bengalensis in nearby areas (5460.35km2) including Cheonan City, and the same data were used for analysis to compare those models. According to the HSI analysis, Prionailurus bengalensis's habitat probability was 74.65% for less than 0.5 and 25.34% for more than 0.5 and the top 30% were forest (99.07%). MaxEnt's analysis showed that 56.22% of those below 0.5 and 43.79% of those above 0.5 were found to have a high explanatory power of 78.3% of AUC. The Paired Wilcoxn test, which evaluated the significance of thoes models, confirmed that the mean difference between the two models was statistically significant (p<0.05). Analysis of the differences in the results of those models using the matrix table shows that score 24.43% HSI and MaxEnt was accordance,12.44% of the 0.0 to 0.2 section, 7.22% of the 0.2 to 0.4 section, 2.73% of the 0.4 to 0.6 section, 1.96% of the 0.6 to 0.8, and 0.08% of the 0.9 to 1.0. To verify where the score difference appears, the result values of those models were reset to values from 1 to 5 and overlaid. Overlapping analysis resulted in 30.26% of the Strongly agree values, 56.77% of the agree values, and 11.92% of the Disagree values. The places where the difference in scores occurs were analyzed in the order of forest (45.23%), agricultural land (34.57%), and urbanization area (7.65%). This confirmed that the analysis of the same target species within the same target site also has differences in forecasts depending on the modelling method. Therefore, a novel analysis method combining the advantages of each modeling in habitat prediction studies should be developed, and future study may be used to select Prionailurus bengalensis and species-protected areas and species protection areas in the future. Further research is judged to require higher accuracy studies through the use of various modeling techniques and on-site verification.

• Journal of Korean Society of Forest Science
• /
• v.82 no.4
• /
• pp.420-430
• /
• 1993

This study was conducted to investigate the effect of the forest environmental factors(5 items) and physico-chemical properties of soil(13 items) on the growth of Pinus thunbergii stands. The 218 plots were sampled over the coastal district of the whole country. In statistical analysis, the explanatory variables were soil and environmental factors(18 items), and the response variable was the site index of Pinus thunbergii stands. Data computation was processed in order of preparation of original data, computation of inner correlation matrix table by correlation analysis, calculation of partial correlation coefficients and coefficients of determination, estimation of regression equation by stepwise begression analysis, and stepwise regression analysis by factor score of factor analysis. The main results obtained were summarized as follows ; 1. The site index in Pinus thunbergii stands way highly correlated with effective soil depth(r=0.8668), slope percentage, organic matter, and total nitrogen. 2. According to the coefficients by partial correlation analysis, effective soil depth(r=0.6270), slope percentage (r=-0.5423) and base saturation(r=0.3278) among environmental factors had a great effect on tree growth. 3. With stepwise regression analysis, the factors effecting on the Pinus thunbergii stands growth were effective soil depth, slope percentage, organic matter, base saturation, soil pH, content of silt, exchangeable Ca, and etc. 4. Estimation equation for the site index of Pinus thunbergii stands was given by $Y=13.2691+0.0242\;X_2-1.2244\;X_4+0.6142\;X_5-0.3472\;X_{11}+0.0355\;X_{13}+0.1552\;X_{15}-0.1002\;X_{17}$. The coefficient of determination for the estimation model was 0.77, which was significant at the 1 percent level. 5. In result of factor analysis by the environmental factors, principal components were 6 factors, and communality contribution percentage was 71.1 percent. 6. By stepwise regression analysis between factor score and site index of Pinus thunbergii stands, the factor group effecting on site index was 5 principal components. The coefficients of determination was 85 percent, which was significant at the 1 percent level. In conclusion, on the occasion of analizing which factors to effect on the tree height growth in Pinus thunbergii stands the stepwise regression analysis proved to be greatly significant. Also the management of Pinus thunbergii stands should be working by the above selected growth factors.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.2
• /
• pp.97-104
• /
• 1979

According to Soil Taxonomy which has been developed over the past 20 years in the soil conservation service of the U. S. D. A, Soils in Korea are classified. This system is well suited for the classification of the most of soils. But paddy field soils have some difficulties in classification because Soil Taxonomy states no proposals have yet been developed for classifying artificially irrigated soils. This paper discusses some problems in the application of Taxonomy and suggestes the classification of paddy field soils in Korea. Following is the summary of the paper. 1. Anthro aquic, Aquic Udipsamments : The top soils of these soils are saturated with irrigated water at some time of year and have mottles of low chroma(2 or less) more than 50cm of the soil surface. (Ex. Sadu, Geumcheon series) 2. Anthroaquic Udipsamments : These sails are like Anthroaquic, Aquic Udipsamments except for the mottles of low chroma within 50cm of the soil surface. (Ex. Baegsu series) 3. Halic Psammaquents : These soils contain enough salts as distributed in the profile that they interfere with the growth of most crop plants and located on the coastal dunes. The water table fluctuates with the tides. (Ex. Nagcheon series) 4. Anthroaquic, Aquic Udifluvents : They have some mottles that have chroma of 2 or less in more than 50cm of the surface. The upper horizon is saturated with irrigated water at sometime. (Ex. Maryeong series) 5. Anthro aquic Udifluvents : These soils are saturated with irrigated water at some time of year and have mottles of low chroma(2 or less) within 50cm of the surface soils. (Ex. Haenggog series) 6. Fluventic Haplaquepts : These soils have a content of organic carbon that decreases irregularly with depth and do not have an argillic horizon in any part of the pedon. Since ground water occur on the surface or near the surface, they are dominantly gray soils in a thick mineral regolith. (Ex Baeggu, Hagseong series) 7. Fluventic Thapto-Histic Haplaquepts : These soils have a buried organic matter layer and the upper boundary is within 1m of the surface. Other properties are same as Fluventic Haplaquepts. (Ex. Gongdeog, Seotan series) 8. Fluventic Aeric Haplaquepts : These soils have a horizon that has chroma too high for Fluventic Haplaquepts. The higher chroma is thought to indicate either a shorter period of saturation of the whole soils with water or some what deeper ground water than in the Fluventic Haplaquepts. The correlation of color with soil drainage classes is imperfect. (Ex. Mangyeong, Jeonbug series) 9. Fluventic Thapto-Histic Aeric Haplaquepts : These soils are similar to Fluventic Thapto Histic Haplaquepts except for the deeper ground water. (Ex. Bongnam series) 10. Fluventic Aeric Sulfic Haplaquepts : These soils are similar to Fluventic Aeric Haplaquepts except for the yellow mottles and low pH (<4.0) in some part between 50 and 150cm of the surface. (Ex. Deunggu series) 11. Fluventic Sulfaquepts : These soils are extremely acid and toxic to most plant. Their horizons are mostly dark gray and have yellow mottles of iron sulfate with in 50cm of the soil surface. They occur mainly in coastal marshes near the mouth of rivers. (Ex. Bongrim, Haecheog series) 12. Fluventic Aeric Sulfaquepts : They have a horizon that has chroma too high for Fluventic Sulfaquepts. Other properties are same as Fluventic Sulfaquepts. (Ex. Gimhae series) 13. Anthroaquic Fluvaquentic Eutrochrepts : These soils have mottles of low chroma in more than 50cm of the surface due to irrigated water. The base saturation is 60 percent or more in some subhroizon that is between depth of 25 and 75cm below the surface. (Ex. Jangyu, Chilgog series) 14. Anthroaquic Dystric Fluventic Eutrochrepts : These soils are similar to Anthroaquic Fluvaquentic Eutrochrepts except for the low chroma within 50cm of the surface. (Ex. Weolgog, Gyeongsan series) 15. Anthroaquic Fluventic Dystrochrepts : These soils have mottles that have chroma of 2 or less within 50cm of the soil surface due to artificial irrigation. They have lower base saturation (<60 percert) in all subhorizons between depths of 25 and 75cm below the soil surface. (Ex. Gocheon, Bigog series) 16. Anthro aquic Eutrandepts : These soils are similar to Anthroaquic Dystric Fluventic Eutrochrepts except for lower bulk density in the horizon. (Ex. Daejeong series) 17. Anthroaquic Hapludalfs : These soils' have a surface that is saturated with irrigated water at some time and have chroma of 2 or less in the matrix and higher chroma of mottles within 50cm of the surface. (Ex. Hwadong, Yongsu series) 18. Anthro aquic, Aquic Hapludalfs : These soils are similar to Anthro aquic Hapludalfs except for the matrix that has chroma 2 or less and higher chroma of mottles in more than 50cm of the surface. (Ex. Geugrag, Deogpyeong se ries)