• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.4
• /
• pp.324-332
• /
• 2011

Purpose: The purpose of this study was to compare the stress distribution of teeth and jaw on load by differentiating property of materials according to each layer of widely used mouthguard. Materials and methods: A Korean adult having normal cranium and mandible was selected to examine. A customized mouthguard was constructed by use of DRUFOMAT plate and DRUFOMAT-TE/-SQ of Dreve Co. according to Signature Mouthguard system. The cranium was scanned by means of computed tomography with 1mm interval. It was modeled with CANTIBio BIONIX/Body Builder program and simulated and interpreted using Alter HyperMesh program. The mouthguard was classified as follows according to the layers. (1) soft guard (Bioplast)(SG) (2) hard guard (Duran)(HG) (3) medium guard (Drufomat)(MG) (4) soft layer + hard layer (SG + HG) (5) hard layer + soft layer (HG + SG) (6) soft layer + hard layer + soft layer (SG + HG + SG) (7) hard layer + soft layer + hard layer (HG + SG + HG) The impact locations on mandible were gnathion, the center of inferior border, and the anterior edge of gonial angle. And the impact directions were oblique ($45^{\circ}$). The impact load was 800 N for 0.1 sec. The stress distribution was measured at maxillary teeth, TMJ and maxilla. The statistics were conducted using Repeated ANOVA and in case of difference, Duncan test was used as post analysis. Results: In teeth and maxilla, the mouthguard contacting soft layer of mandibular teeth presented lowest stress measure and, in contrast, in condyle, the mouthguard contacting hard layer of mandibular teeth presented lowest stress measure. Conclusion: For all impact directions, soft layer + hard layer + soft layer, the mouthguard with three layers which the hard layer is sandwiched between two soft layers, showed relatively even distribution of stress in impact.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.120-127
• /
• 2011

Purpose: The purpose of this study was to examine the effects of chromium chloride addition on coloration, mechanical property and microstructure of 3Y-TZP. Materials and methods: Chromium chloride was weighed as 0.06, 0.12, and 0.25 wt% and each measured amount was dissolved in alcohol. $ZrO_2$ powder was mixed with each of the individual slurry to prepare chromium doped zirconia specimen. The color, physical properties and microstructure were observed after the zirconia specimen were sintered at $1450^{\circ}C$. In order to evaluate the color, spectrophotometer was used to analyze the value of $L^*$, $C^*$, $a^*$ and $b^*$, after placing the specimen on a white plate, and measured according to the International Commission on Illumination (CIE) standard, Illuminant D65 and SCE system. The density was measured in the Archimedes method, while microstructures were evaluated by using the scanning electron microscopy (SEM) and XRD. Fracture toughness was calculated Vickers indentation method and indentation size was measured by using the optical microscope. The data were analyzed with 1-way ANOVA test (${\alpha}$ = 0.05). The Tukey multiple comparison test was used for post hocanalysis. Results: 1. Chromium chloride rendered zirconia a brownish color. While chromium chloride content was increased, the color of zirconia was changed from brownish to brownish-red. 2. Chromium chloride content was increased; density of the specimen was decreased. 3. More chromium chloride in the ratio showed increase size of grains. 4. But the addition of chromium chloride did not affect the crystal phase of zirconia, and all specimens showed tetragonal phase. 5. The chromium chloride in zirconia did not showed statistically significant difference in fracture toughness, but addition of 0.25 wt% showed a statistically significant difference (P<.05). Conclusion: Based on the above results, this study suggests that chromium chlorides can make colored zirconia while adding in a liquid form. The new colored zirconia showed a slight difference in color to that of the natural tooth, nevertheless this material can be used as an all ceramic core material.

• Journal of the Korean Vacuum Society
• /
• v.17 no.6
• /
• pp.538-543
• /
• 2008

Recently a nano-scale diamond is possible to manufacture forms of powder(below 100 nm) by new processing of explosion or deposition method. Using a sintering of nano-scale diamond is possible to manufacture of grinding tools. We have need of a processing development of coated uniformly inorganic to prevent an abnormal grain growth of nano-crystal and bonding obstacle caused by sintering process. This paper, in order to improve the sintering property of nano-scale diamond, we coated ZnO thin films(thickness: $20{\sim}30\;nm$) in a vacuum by ALD(atomic layer deposition) Economically, in order to deposit ZnO all over the surface of nano-scale diamond powder, we used a new modified fluidized bed processing replaced mechanical vibration effect or fluidized bed reactor which utilized diamond floating owing to pressure of pulse(or purge) processing after inserted diamond powders in quartz tube(L: 20 mm) then closed quartz tube by porosity glass filter. We deposited ZnO thin films by ALD in closed both sides of quartz tube by porosity glass filter by ALD(precursor: DEZn($C_4H_{10}Zn$), reaction gas: $H_2O$) at $10^{\circ}C$(in canister). Processing procedure and injection time of reaction materials set up DEZn pulse-0.1 sec, DEZn purge-20 sec, $H_2O$ pulse-0.1 sec, $H_2O$ purge-40 sec and we put in operation repetitive 100 cycles(1 cycle is 4 steps) We confirmed microstructure of diamond powder and diamond powder doped ZnO thin film by TEM(transmission electron microscope) Through TEM analysis, we confirmed that diamond powder diameter was some $70{\sim}120\;nm$ and shape was tetragonal, hexagonal, etc before ALD. We confirmed that diameter of diamond powders doped ZnO thin film was some $70{\sim}120\;nm$ and uniform ZnO(thickness: $20{\sim}30\;nm$) thin film was successfully deposited on diamond powder surface according to brightness difference between diamond powder and ZnO.

• Fashion & Textile Research Journal
• /
• v.24 no.6
• /
• pp.667-685
• /
• 2022

This paper aims to investigate 4D printing materials for soft robots. 4D printing is a targeted evolution of the 3D printed structure in shape, property, and functionality. It is capable of self-assembly, multi-functionality, and self-repair. In addition, it is time-dependent, printer-independent, and predictable. The shape-shifting behaviors considered in 4D printing include folding, bending, twisting, linear or nonlinear expansion/contraction, surface curling, and generating surface topographical features. The shapes can shift from 1D to 1D, 1D to 2D, 2D to 2D, 1D to 3D, 2D to 3D, and 3D to 3D. In the 4D printing auxetic structure, the kinetiX is a cellular-based material design composed of rigid plates and elastic hinges. In pneumatic auxetics based on the kirigami structure, an inverse optimization method for designing and fabricating morphs three-dimensional shapes out of patterns laid out flat. When 4D printing material is molded into a deformable 3D structure, it can be applied to the exoskeleton material of soft robots such as upper and lower limbs, fingers, hands, toes, and feet. Research on 4D printing materials for soft robots is essential in developing smart clothing for healthcare in the textile and fashion industry.

• Korean Security Journal
• /
• no.1
• /
• pp.351-370
• /
• 1997

This study concerns possible measures to prevent separatists' terrorist acts against overseas Korean businessmen. Of late, many Korean enterprises are helping a number of foreign countries develop their economy, by building factories and manning regional offices in those countries. But recent development of terrorism especially against Korean businessmen is alarming. This report discusses the need for Korean enterprises heading overseas to prepare themselves with awareness of terrorism and possible protective measures against it, besides their routine pursuance of profits; and for the government and prospective enterprises to refrain from investing in those countries having active separatist movements. If an investment has become inevitable, a careful survey of the region in conflict should be conducted and self-protective measures should be put in place through security information exchange, emergency coordination and training of personnel, etc. This study will first review the past terrorist incidents involving employees of overseas Korean enterprises, and then will focuss on seeking effective measures on the basis of the reported incidents. In carrying out the study, related literature from both home and abroad have been used along with the preliminary materials reported and known on the Internet from recent incidents. 1. The separatist movements of minority groups Lately, minority separatist groups are increasingly resorting to terrorism to draw international attention with the political aim of gaining extended self rule or independence. 2. The state of terrorism against overseas Korean enterprises and Koreans Korean enterprises are now operating businesses, and having their own personnel stationed, in 85 countries including those in South East Asia and Middle East regions. In Sri Lanka, where a Korean enterprise recently became a target of terrorist bombing, there are 75 business firms from Korea and some 700 Korean employees are stationed as of August 1996. A total of 19 different terrorist incidents have taken place against Koreans abroad since 1990. 3. Terrorism preventive measures Terrorism preventive measures are discussed in two ways: measures by the government and by the enterprises. ${\blacktriangleleft}$ Measures by the government - Possible measures at governmental level can include collection and dissemination of terrorist activity information. Emphasis should be given to the information on North Korean activities in particular. ${\blacktriangleleft}$ Measures by individual enterprises - Organizational security plan must be established by individual enterprises and there should also be an increase of security budget. A reason for reluctant effort toward positive security plan is the perception that the security budget is not immediately linked to an increment of profit gain. Ensuring safety for overseas personnel is a fundamental obligation of an enterprise. Consultation and information exchange on security plan, and an emergency support system at a threat to security must be sought after and implemented. 4. Conclusion Today's terrorism varies widely depending on reasons and causes, and its means has become increasingly informationalized and scientific as well while its method is becoming more clandestine and violent. Terrorist organizations are increasingly aiming at enterprises for acquisition of budgets needed for their activities. Korean enterprises have extended their business realm to foreign countries since 1970, exposing themselves to terrorism. Enterprises and their employees, therefore, should establish their own security measures on the one hand while the government must provide general measures, on the other, for the protection of the life and property of Korean residents abroad from terrorist attacks. In this regard, set-up of a counter terrorist organization that coordinates the efforts of government authorities in various levels in planning and executing counter terrorist measures is desired. Since 1965, when the hostile North Korea began to step up its terrorist activities against South Koreans, there have been 7 different occasions of assassination attempt on South Korean presidents and some 500 cases of various kidnappings and attempted kidnappings. North Korea, nervous over the continued economic growth and social stabilization of South Korea, is now concentrating its efforts in the destruction and deterioration of the national power of South Korea for its earlier realization of reunification by force. The possibility of North Korean terrorism can be divided into external terrorist acts and internal terrorist acts depending on the nationality of the terrorists it uses. The external terrorist acts include those committed directly by North Korean agents in South Korea and abroad and those committed by dissident Koreans, hired Korean residents, or international professionals or independent international terrorists bought or instigated by North Korea. To protect the life and property of Korean enterprises and their employees abroad from the threat of terrorism, the government's administrative support and the organizational efforts of enterprises should necessarily be directed toward the planning of proper security measures and training of employees. Also, proper actions should be taken against possible terrorist acts toward Korean business employees abroad as long as there are ongoing hostilities from minority groups against their governments.

• Korean Journal of Food Science and Technology
• /
• v.37 no.6
• /
• pp.873-881
• /
• 2005

This study was conducted to improve the properties of frozen dough foods (buns and noodles etc.) on the quality deterioration with microwave oven cooking. Microwave is a useful cooking method, but it quickly takes moisture from food surface and makes lowering food quality abruptly. For improvement of these problems, mixing doughs with addition of various additives of 34 types manufactured respectively; starches, modified starches, gums and emulsifiers etc. Each mixing dough produced in sheet type $(30{\times}30{\times}1mm)$ and steamed them, was quickly froze at $-70^{\circ}C$ and packed with polyethylene. Packed samples kept at $-20^{\circ}C$ for 48 hours. After they were steam or microwave treatment packed or non-packed with polyethylene, studied for improvement effects of quality as sensory evaluation and selected 6 type additives; modified starches (TA, ST), gums (AR, GA) and emulsifiers (E, S1) as improvement agent. Because moisture loss from microwave oven cooking leads to quality deterioration of frozen dough foods, additive, such as including starches, modified starch, gums, and emusifiers were added to improve dough properties. Amylogram, scanning electron microscopy, textural analysis, and differential scanning calorimetry revealed addition of additives improved textural properties including surface-hardening of frozen dough foods compared to the control.

• Restorative Dentistry and Endodontics
• /
• v.34 no.2
• /
• pp.130-136
• /
• 2009

The aim of this study was to develop a method for measuring the slumping resistance of flowable resin composites and to evaluate the efficacy using rheological methodology. Five commercial flowable composites (Aelitefil flow:AF, Filtek flow:FF, DenFil flow:DF, Tetric flow:TF and Revolution:RV) were used. Same volume of composites in a syringe was extruded on a glass slide using a custom-made loading device. The resin composites were allowed to slump for 10 seconds at $25^{\circ}C$ and light cured. The aspect ratio (height/diameter) of cone or dome shaped specimen was measured for estimating the slumping tendency of composites. The complex viscosity of each composite was measured by a dynamic oscillatory shear test as a function of angular frequency using a rheometer. To compare the slumping tendency of composites, one way-ANOVA and Turkey's post hoc test was performed for the aspect ratio at 95% confidence level. Regression analysis was performed to investigate the relationship between the complex viscosity and the aspect ratio. The results were as follows. 1. Slumping tendency based on the aspect ratio varied among the five materials (AF

• Korean Journal of Heritage: History & Science
• /
• v.44 no.4
• /
• pp.18-41
• /
• 2011

The Safeguarding of Intangible Cultural Heritage in Korea has begun since1962 when the Cultural Properties Protection Act was established. Korean ICH Safeguarding system is initially derived from Cultural Properties Protection Act in Japan. Japan has started Important ICH Designation System in 1954 to concede the skills and artistic talents holders, thus it could implement the multilateral system management for adopting different ICH protection systems such as Important Intangible Folklore Properties, Selection and Preservation Techniques, and Documenting Records. However, Korea has solely adopted Important ICH Designation System since Cultural Properties Protection Act was introduced. Korean ICH Safeguarding System represented by the Certification System of ICH Skill Holders is to ensure skills and artistic holders who perform the elements of Intangible Cultural Heritage, and manage the safeguarding of intangible cultural heritage in order to let the skills and artistic holders instruct inheritors. As a result, it could build up the internal foundation for the diffusion of inheritors and established the related organizations. However, the inheritor-centered protection system has caused many problems as it is being lasted for more than fifty years. Fragmented designation measures, the cultural power of skill holders, and the research and evaluation methods have pointed out the difficulties of safeguarding and preservation measures of ICH. Moreover,the legitimacy of safeguarding system related in the authenticity of transmission in ICH has emerged to review the safeguarding system of ICH with diverse viewpoints. Therefore, this paper will review the implementation process and achievement of ICH safeguarding system to examine the problem and causes of the safeguarding system. The conference records of Cultural Property Association and articles of cultural properties policies directors, Cultural Property Association members, and professional experts are being used for the initial materials of this paper, and it is examined for the contents of designation system of Important Cultural Heritage, rather than overall cases. Thus such problems the limitation of expansion in ICH lists as inheritor-centered designation system, hierarchical and exclusive transmission system, inappropriate concept of archetype as the principle of ICH transmission are derived from the root of Important ICH designation system. Thus this paper demonstrates that this system must be revised for the expansion of ICH safeguarding system in Korea and points out multilateral protection system should be established as well as Certification System of Important ICH skill holders.

• International Journal of Highway Engineering
• /
• v.10 no.1
• /
• pp.87-95
• /
• 2008

One way to shield an atypical structure to secure the occupant safety of an impact vehicle is to stack energy absorbing material modules around the structure. To be applicable to a cushion module, material must have enough energy absorbing capabilities while satisfying the safety requirements of the vehicle occupant. Static compression test of the potential materials gives a good indication which material is good for a slacking module. This paper presents the mechanical properties that a cushion material must have to satisfy the safety requirements. Static tests are performed for Quard-Guard system module, sand bag, recycled tires, Geo-Container, Geo-Cell and Expanded Polystyren (EPS) Blocks. Static test results are discussed and EPS block of $30kg/m^{3}$ density showed good potential for a cushion module. To check the dynamic effect of EPS block, drop tests have been made up to 35.6km/h impact speed. Drop test results are compared with static test results and no appreciable difference was found. To improve the EPS module property, making holes to the block is suggested and drop test are performed for the modified blocks. From the drop test results, design values are suggested.

• Nuclear Engineering and Technology
• /
• v.18 no.3
• /
• pp.218-227
• /
• 1986

Studies were conducted to determine the extent of oxidation and same of the mechanical property changes of Zircaloy-4 fuel cladding after it was exposed to hot steam environment. The purpose of these tests was to provide some informations on the embrittlement behavior of CANDU type fuel cladding, which could be experienced under the loss-of-coolant accident conditions. The Zircaloy fuel cladding tubes were exposed in a steam environment at the temperature of 90$0^{\circ}C$, 1,00$0^{\circ}C$. The growth of the ZrO$_2$ layer combined with an oxygen rich $\alpha$-phase layer into the Zircaloy tube material was found as a function of time t and temperature of steam exposure, E=1.1√Dt+0.002 where D is a temperature dependent diffusion coefficient. The tensile strength of the specimens exposed for a short period increased but decreased continuously with further exposure. The circumferential elongation was drastically changed with the exposure time while the hoop strength did't decrease greatly. The X-ray measurement of preferred orientation of the Zircaloy tube material indicated that grains in the as received tube were oriented such that the poles of the basal (0001) planes were predominantly radial, while the poles of the basal plane in the tube materials heattreated at 1,00$0^{\circ}C$ were oriented tangentially. It appears that this reoriented texture may contribute to lessening the decrease of the hoop strength of the heat treated Zircaloy tube material.