• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.298-298
• /
• 2007

Influence of $TiO_2$ on the dielectric properties of the $Bi(Nb_{0.7}Ta_{0.3})O_4$ ceramic with 7 wt% zinc borosilicate(ZBS) glass was investigated as a function of the $TiO_2$ contents with a view to applying this system to LTCC technology. The $Bi(Nb_{0.7}Ta_{0.3})O_4$ ceramic addition of 7 wt% ZBS glass ensured successful sintering below $900^{\circ}C$. But, TCF of $Bi(Nb_{0.7}Ta_{0.3})O_4$ ceramic is large negative values, respectively, it is necessary to adjust to zero TCF for practical applications Therefore, the addition of materials having positive TCF, such as $TiO_2$, might be an effective method for the improvement. In general, increasing addition of $TiO_2$ increased dielectric constant and TCF but it decreased the sinterability and $Q{\tiems}f$ value significantly due to the dielectric property and high sintering temperature of $TiO_2$. $Bi(Nb_{0.7}Ta_{0.3})O_4$ ceramic with 7 wt% ZBS glass and then addition 0.5 wt% $TiO_2$ sintered at $900^{\circ}C$ demonstrated 42 in the dielectric constant(${\varepsilon}_r$), 1,000 GHz in the $Q{\times}f$ value, and $10{\pm}5\;ppm/^{\circ}C$ in the temperature coefficient of resonant frequency(${\tau}_f$).

• 한국지반신소재학회논문집
• /
• 제5권2호
• /
• pp.31-37
• /
• 2006

본 논문에서 고함수비 슬러지와 퇴적물 탈수에 지오텍스타일 튜브의 이용가능성과 이에 영향을 미치는 요인들에 대한 평가를 수행하였다. 네 가지 고함수비물질을 사용하여 두 가지 지오텍스타일에 대해 다른 두 여과압력으로 실험을 실시하였다. 실험결과, 직포지오텍스타일 튜브는 일반적인 토사보유성기준을 만족하지 않지만 상류측의 필터케익 형성에 의해 세립자의 많은 부분을 유지하였고, 필터케익 형성 후, 투수성은 급속하게 감소하였다. 높은 여과압력은 탈수율을 증가시키는 경향이 있지만 여과효율에는 매우 적은 영향을 미치고, 탈수능력은 지오텍스타일에 관계된 여러 요인에 의해 영향을 받는데 슬러지 재료 자체의 특성이 탈수효율에 지배적인 요소로 나타남을 알 수 있었다.

• Transactions on Electrical and Electronic Materials
• /
• 제12권6호
• /
• pp.253-257
• /
• 2011

This study was carried out to solve problems such as radio frequency band depletion, confusion risk, and security loss in existing visible wireless communication systems, and to determine the applicability of next-generation networks. A light-emitting diode (LED) light communication system was implemented with a controlling switching light module using the ATmega16 micro-controller. To solve the existing modulation effect and disturbance in visible light communication, an integrated interface was evaluated with a driving light module and analyzes its reception property. A transmitter/receiver using the ATmel's micro-controller, high-intensity white LED-6 modules, and infrared sensor KSM60WLM and visible sensor TSL250RD were designed. An experiment from the initial value of distance to 2.5 m showed 0.46 V of the voltage loss, and if in long distance, external light interference occurred and light intensity was lost by external impact and thus data had to be modified or reset repeatedly. Additionally, when we used 6 modules through the remote controller's lighting dimming, data could be transmitted up to 1.76 m without any errors during the day and up to 2.29 m at night with around 2~3% communication error. If a special optical filter can reduce as much external light as possible in the integrated interface, the LED for lighting communication systems may be applied in next generation networks.

• Nuclear Engineering and Technology
• /
• 제50권3호
• /
• pp.470-477
• /
• 2018

With a highly functional methyl vinyl silicone rubber (VMQ) matrix and filler materials of $B_4C$, PbO, and benzophenone (BP) and through powder surface modification, silicone rubber mixing, and vulcanized molding, a flexible radiation shielding and resistant composite was prepared in the study. The dispersion property of the powder in the matrix filler was improved by powder surface modification. BP was added into the matrix to enhance the radiation resistance performance of the composites. After irradiation, the tensile strength, elongation, and tear strength of the composites decreased, while the Shore hardness of the composites and the crosslinking density of the VMQ matrix increased. Moreover, the composites with BP showed better mechanical properties and smaller crosslinking density than those without BP after irradiation. The initial degradation temperatures of the composites containing BP before and after irradiation were $323.6^{\circ}C$ and $335.3^{\circ}C$, respectively. The transmission of neutrons for a 2-mm thick sample was only 0.12 for an Am-Be neutron source. The transmission of ${\gamma}$-rays with energies of 0.662, 1.173, and 1.332 MeV for 2-cm thick samples were 0.7, 0.782, and 0.795, respectively.

• 기술혁신연구
• /
• 제7권1호
• /
• pp.151-175
• /
• 1999

This study develops principles for determining and managing costs applicable to grants and cooperative agreements for basic research. We investigated financial management policies of funding agencies and foundations in the United States, United Kingdom, Canada, Germany, Japan and Korea. Also we surveyed opinions of researchers and research fund administrators in Korean universities. Based on our review of funding agencies and our survey, the recommended management policies for grants and cooperative agreements are as follows: (1) Cost Structure. Cost of a sponsored agreement is comprised of the allowable direct costs and allocable portion of the allowable indirect costs. Direct costs can be further divided into salaries and wages, equipment, and other direct costs. (2) Salaries and Wages. Salaries and wages applied to a grant are paid for services rendered to the project during the period of performance of the particular agreement. In order to give researchers financial incentive, researcher allowance can be paid up to 30% of his/her regular salary. (3) Equipment. Any property purchased with grants which has an acquisition cost of 5,000,000 won or more per item and a normal life expectancy of two years or more is defined as equipment. Expenditures for special purpose equipment are allowable provided the acquisition of items is necessary for the research supported by the grant. (4) Other Direct Costs. Other direct costs are comprised of travel (both domestic and foreign), materials, other costs. Other costs may not exceed 30% of total other direct costs. (5) Indirect Costs. Since there is no clear consensus on indirect costs and additional budget is necessary to support actual indirect costs, the practical policy at the moment is to give a research support expense in lieu of indirect costs. In the future, however, some form of actual indirect costs should be supported. This study develops principles for determining and managing costs applicable to grants and cooperative agreements funded by the Ministry of Science and Technology. This research can be applied to other governmental agencies to give consistency and uniformity in administration of grants and cooperative agreements.

• Tribology and Lubricants
• /
• 제30권6호
• /
• pp.343-349
• /
• 2014

Currently, in order to resist the scratching of the fuel rod surface while fabricating the fuel assembly of the light-water nuclear reactor, we use a solution of nitrocellulose, an explosive material, as a dry lubricant along with its solvent. However, the demand for developing safe and harmless aqueous alternative materials for environment-conservation and field-worker safety has increased. In this study, we demonstrate the preparation of a novel aqueous resin composite using a formulation of aqueous polymeric resin, alcoholic solvent, and water. Subsequently, we characterize this composite on the basis of hardness, adhesive property, and water solubility using plates similar to the fuel rod material. The insertion test of a fuel rod coated with the YS-3 composite shows load values of $18.8-20.5kg/cm^2$, which is comparable with $18.8-20.5kg/cm^2$ of the nitrocellulose coating agent. In addition, the depth and width of longitudinal scratches caused by the YS-3 composite test are 50% higher than those of the standard. We can develop a harmless and safe aqueous dry lubricant to replace the existing NC products through field testing of 264 pieces of fuel rods, after producing 350 kg of the YS-3 prototype. The scratch test for the rod surface showed that weight of chip of YS-3 prototype was smaller than that of NC before and after solvent treatment, indicating the properties of YS-3 prototype was comparable to the counterpart.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.287.1-287.1
• /
• 2013

The Isolation of few-layered transition metal dichalcogenides has mainly been performed by mechanical and chemical exfoliation with very low yields. in particular, the two-dimensional layer of molybdenum disulfide (MoS2) has recently attracted much interest due to its direct-gap property and potential application in optoelectronics and energy harvesting. However, the synthetic approach to obtain high-quality and large-area MoS2 atomic thin layers is still rare. In this account, a controlled thermal reductionsulfurization method is used to synthesize large-MoOx thin films are first deposited on Si/SiO2 substrates, which are then sulfurized (under vacuum) at high temperatures. Samples with different thicknesses have been analyzed by Raman spectroscopy and TEM, and their photoluminescence properties have been evaluated. We demonstrated the presence of single-, bi-, and few-layered MoS2 on as-grown samples. It is well known that the electronic structure of these materials is very sensitive to the number of layer, ranging from indirect band gap semiconductor in the bulk phase to direct band gap semiconductor in monolayers. This synthetic approach is simple, scalable, and applicable to other transition metal dichalcogenides. Meanwhile, the obtained MoS2 films are transferable to arbitrary substrates, providing great opportunities to make layered composites by stacking various atomically thin layers.

• 대한기계학회논문집A
• /
• 제36권9호
• /
• pp.1059-1064
• /
• 2012

본 연구에서는 냉간 굽힘 후 잔류응력 제거 열처리된 곡관에서 기계적물성치를 파악하기 위해서, 냉간 굽힘과 잔류응력 제거 열처리를 모사한 모사시편을 이용하여 인장시험을 수행하였다. 시험 결과로부터 냉간 가공 후 잔류응력 제거 열처리를 수행할지라도 재료의 강도는 냉간 가공 전에 비해 증가하고 연성은 감소되는 것을 확인하였다. 또한, 강도 증가와 연성 감소는 냉간 가공시 적용된 변형률이 클수록 심화되었다. 따라서, 냉간 굽힘시 변형이 크게 발생하는 곡관의 외호부와 내호부는 직관에 비해 강도는 높고 연성은 낮을 것으로 예측되며, 곡관의 측면은 굽힘 가공 전의 직관과 유사한 기계적물성치를 보일 것으로 예측되었다.

• 한국측량학회지
• /
• 제32권4_1호
• /
• pp.327-333
• /
• 2014

도시 열 환경 개선을 위해서는 무엇보다도 특정지역의 열 환경에 대한 구조적 특성분석이 선행되어져 문제점을 분석하고 보완되어야 한다. 본 연구에서는 Landsat 위성을 활용하여 대구광역시의 1월과 8월의 열 환경의 중심성 측정, 분포도 작성, 공간통계 분석 등을 활용하여 공간적 특성에 따른 열 환경구조를 분석하였다. 분석을 위해 위성영상의 열적외밴드를 활용하여 표준정규분포화하여 점수로 중심성을 추출하였고, 국지적 공간에서의 자기 상관성을 파악하기 위한 국지적 모란지수(Local Local Moran's I)를 기초로 한 Cluster Map를 작성하여 환경공간구조의 분포 특성을 파악하였다. 따라서 위성영상을 활용한 열 환경 분포 특성과 중심지의 파악은 도시의 열 환경 개선 계획 및 관리방안을 모색하는데 필요한 중요한 기초자료로서 정부의 다양한 열환경 정책이나 계획에 우선시 되어야 할 참고자료를 제공하고자 한다.

• 패션비즈니스
• /
• 제14권6호
• /
• pp.39-52
• /
• 2010

Interests in creating three-dimensionally designed fabric materials are growing rapidly in the sectors of the fashionable textiles with the creativity, new functions, and aesthetics. A number of finishing methods have been developed and proposed to add or create new functions and designs for silk fabrics. Due to the strong hydrogen bonds between the molecules of silk fibroins, the thermal treatment methods used in thermoplastic fiber processing, which can easily deform the synthetic filament fabrics to endow three-dimensional appearance to the fabrics, are not applicable to the silk fabric treatment. In order to modify the fine structure of silk fiber, neutral salt solution treatment methods have been suggested. In this study, the effect of the calcium nitrate solution on the physical and mechanical properties of silk fabrics was investigated by using the KES(Kawabata Evaluation System) equipment. Based on these findings, relationships between parameters, for example, the thickness and the compressional energy, the thickness and the compressional linearity, and the air permeability and the pore area statistical analysis were investigated. The relationships between the process parameters such as treatment temperature/time and the resulting fabric property parameters were also analyzed by using several SAS procedures.