• Journal of Animal Science and Technology
• /
• v.65 no.3
• /
• pp.490-510
• /
• 2023

Feed safety is needed to produce and provide safe animal feeds for consumers, animals, and the environment. Although feed safety regulations have been set for each country, there is a lack of clear feed safety regulations for each livestock. Feed safety regulations are mainly focused on heavy metals, mycotoxins, and pesticides. Each country has different safe levels of hazardous materials in diets. Safe levels of hazardous materials in diets are mostly set for mixed diets of general livestock. Although there is a difference in the metabolism of toxic materials among animals, the safe level of feed is not specific for individual animals. Therefore, standardized animal testing methods and toxicity studies for each animal are needed to determine the correct safe and toxic levels of hazardous materials in diets. If this goal is achieved, it will be possible to improve livestock productivity, health, and product safety by establishing appropriate feed safety regulations. It will also provide an opportunity to secure consumer confidence in feed and livestock products. Therefore, it is necessary to establish a scientific feed safety evaluation system suitable for each country's environment. The chance of outbreaks of new hazardous materials is increasing. Thus, to set up appropriate toxic levels or safe levels in feed, various toxicity methods have been used to determine toxic levels of hazardous materials for humans and animals. Appropriate toxic testing methods should be developed and used to accurately set up and identify toxicity and safe levels in food and feed.

• KIEAE Journal
• /
• v.16 no.1
• /
• pp.81-87
• /
• 2016

Purpose: Heat transfers phenomena are described by the second order partial differential equation and its boundary conditions. In a three-dimensional structure of a building, the heat transfer phenomena generally include more than one material, and thus, become complicate. The analytic solutions are useful to understand heat transfer phenomena, but they can hardly be applied in engineering or design problems. Engineers and designers have generally been forced to use numerical methods providing reliable results. Finite volume methods with the unstructured grid system is only the suitable means of the analysis for the complex and arbitrary domains. Method: To obtain an numerical solution, a discretization method, which approximates the differential equations, and the interpolation methods for temperature and heat flux between two or more materials are required. The discretization methods are applied to small domains in space and time, and these numerical solutions form the descretized equations provide approximated solutions in both space and time. The accuracy of numerical solutions is dependent on the quality of discretizations and size of cells used. The higher accuracy, the higher numerical resources are required. The balance between the accuracy and difficulty of the numerical methods is critical for the success of the numerical analysis. A simple and easy interpolation methods among multiple materials are developed. The linear equations are solved with the BiCGSTAB being a effective matrix solver. Result: This study provides an overview of discretization methods, boundary interface, and matrix solver for the 3-dimensional numerical heat transfer including two materials.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.2
• /
• pp.91-100
• /
• 2017

The primary goal of most clothing-related textbooks currently used in colleges in Korea is to determine how to plan and develop basic patterns. Therefore, they are limited in understanding the patterns and sewing methods of practical, ready-made clothes that are continuously being upgraded. According to previous studies regarding sewing methods in clothing construction textbooks, tight skirt, tailored jacket, and shirt sewing methods have been explained. However, there has been no study on the sewing methods of slacks. Therefore, this study attempted to suggest basic data needed for making slacks through a comparative analysis of their sewing methods for educational purposes. In addition, this paper is meaningful in that it complements clothing construction-related textbooks according to the current trends of diverse clothing design and materials and develops learning materials for the construction of clothes, which are applicable to practice. In this study, the sewing methods and construction procedures of slacks stated in clothing construction textbooks that are currently used in colleges and fashion-related educational institutes were analyzed. Among a total of 47 textbooks on the market, 15 books that cover the cutting and sewing methods of slacks and are suitable to slacks design were used. According to the analysis, most textbooks described the production methods only, without explanation of materials, which can affect clothing construction methods. Because there is a large difference in pocket and slacks procedures by textbook, there is a need for a standardized construction method with changes in clothing materials and design.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1226-1228
• /
• 1995

This paper introduced foreign standard testing methods on composite insulators(for transmission, distribution) and mentioned on (1)evaluation of material property (2)short-term test of prototype (3)insulation efficiency on use to evaluation property of insulators made of composite insulating materials.

• Applied Microscopy
• /
• v.47 no.1
• /
• pp.19-28
• /
• 2017

Since graphene was discovered in 2004, two-dimensional (2D) materials have been actively studied. Especially, 2D transition metal dichalcogenides (TMDs), such as $MoS_2$ and $WS_2$, have been the subject of significant research because of their exceptional optical, electrical, magnetic, catalytic, and morphological properties. Therefore, these materials are expected to be used in a variety of applications. Furthermore, tuning the properties of TMDs is essential to improve their performance and expand their applications. This review classifies the various doping methods of 2D TMDs, and it summarizes how the dopants interact with the materials and how the performance of the materials improves depending on the synthesis methods and the species of the dopants.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.6
• /
• pp.1185-1189
• /
• 2008

Two HPLC methods such as cefadroxil and cefalexin methods were compared in their performance for the quantitative analysis of the content and purity of $\beta$ -lactamic antibiotic, cefradine, for six bulk drug samples. Between the two methods, the cefadroxil method prescribed by the European Pharmacopoeia (EP) for the determination of impurities in cefradoxil was superior to the cefalexin method prescribed by the EP and by the United States Pharmacopeia (USP) for the determination of cefalexin impurity in cefradine in terms of the greater stability of the chromatogram baselines and the higher precision, i.e., the lower % relative standard deviation (RSD). Based on the comparison of the two HPLC methods, the cefadroxil method was recommended to replace the TLC method, which has been prescribed by the EP as the official method for determination of extraneous impurities in cefradine.

• Journal of the Korean Ceramic Society
• /
• v.54 no.4
• /
• pp.272-277
• /
• 2017

Organic-inorganic hybrid thermoelectric materials have obtained increasing attention because it opens the possibility of enhancing thermoelectric performance by utilizing the low thermal conductivity of organic thermoelectric materials and the high Seebeck coefficient of inorganic thermoelectric materials. Moreover, the organic-inorganic hybrid thermoelectric materials possess numerous advantages, including functional aspects such as flexibility or transparency, low cost raw materials, and simplified fabrication processes, thus, allowing for a wide range of potential applications. In this study, the types and synthesis methods of organic-inorganic thermoelectric hybrid materials were discussed along with the methods used to enhance their thermoelectric properties. As a key factor to maximize the thermoelectric performances of hybrid thermoelectric materials, the nanoengineering to control the nanostructure of the inorganic materials as well as the modification of the organic material structure and doping level are considered, respectively. Meanwhile, the interface between the inorganic and organic phase is also important to develop the hybrid thermoelectric module with excellent reliability and high thermoelectric efficiency in addition to its performance in various electronic devices.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.42-45
• /
• 2005

Accurate prediction of the fate and transport of contaminants in soils and sediments is very Important to environmental risk assessment and effective remediation of contaminated soils and sediments. The fate and transport of contaminants in subsurface are affected by geosorbents, especially carbonaceous materials including black carbon. Various physical and chemical treatment methods have been developed to separate different kinds of carbonaceous materials from soils and sediments. However, the effects of these separation methods on the properties of remaining carbonaceous materials including sorption capacity and linearity are unclear. The objective of this study is to determine if the chemical and thermal treatment methods previously used to separate different carbonaceous material fractions affect the properties of carbonaceous materials including longer term sorption capacity of hydrophobic organic contaminants. The results indicate that treatments with hydrochloric acid (HCl)/hydrofluoric acid (HF), trifluoroacetic acid (TFA), sodium hydroxide (NaOH) may not affect the sorption capacity of black carbon reference materials such as char and soot, however, treatments with acid dichromate $(K_2Cr_2O_7/H_2SO_4)$ and heat $(375^{\circ}C)$ for 24 hours in sufficient of oxygen) decrease the sorption capacity of them. The results of longer term sorption isotherm indicate that 2 days might be enough for trichloroethene (TCE) to equilibrate apparently with treated black carbon reference materials. The results suggest that acid dichromate and heat treatments may not appropriate method to investigate sorption properties of black carbon in soils and sediments.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.2
• /
• pp.116-125
• /
• 2007

This article is concerned with synthesis, characterisation and electrochemical application of the mixed conducting perovskite type oxide to electrode materials for solid oxide fuel cell. First, this review provides a comprehensive survey of the various synthetic methods such as solid state reaction, Pechini, glycine nitrate process and sol-gel methods for the preparation of perovskite type oxide powders. Subsequently, the electrical and microstructural properties of the mixed conducting oxides were discussed in detail. Finally, as electrochemical applications of the mixed conducting perovskite type oxides to electrode materials for solid oxide fuel cell, fundamentals of theoretical ac-impedance model for porous mixed conducting electrodes were introduced. Furthermore, the ac-impedance behaviour of porous and dense mixed conducting electrodes prepared by various synthetic methods was discussed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.4
• /
• pp.378-385
• /
• 1995

The growth processes of improved methods for MBE, LPE and $\mu$ - PD methods are discussed taking the oxide materials, especially those of Bi - Sr - Ca - Cu family $LiNbO_3$ and $K_3Li_2Nb_5O_{15}$ family as examples. It is suggested that the crystal growth far from equilibr iu m including composition homogeneity has been achieved to satisfy in understanding and controlling the atomic interfaces.