• Journal of Korea Technology Innovation Society
• /
• v.8 no.2
• /
• pp.732-756
• /
• 2005

This paper attempts to find the sources of materials technology innovation and to analyze the relationships between the sources and materials technology innovation. Starting from the traditional hypothesis on the innovation sources (e.g. technology-push, demand-pull and user-supplier), materials scientific knowledges, materials processing technologies and users' needs are found as three main sources of innovation in materials technology. There are not only close interactions between the sources and materials innovation, but also the interactions among the sources of innovations play important roles for materials technology innovation. This paper discusses the characteristics of interactions between sources of innovation in materials technology. This study on the sources and interactions among sources may provide important information for policymaking in materials technology

• Journal of Korea Technology Innovation Society
• /
• v.9 no.1
• /
• pp.103-130
• /
• 2006

This paper is to categorize the innovation patterns of advanced materials technologies Many existing taxonomies of innovation pattern consider the whole of industries and the system sector rather than a specific sector. On the basis of the interactions between materials sector and user sectors, this paper suggests four innovation patterns, push-type material innovation, needs-type materials innovation, push-type process innovation and needs-type process innovation. This categorization of innovation pattern not only provides a new approach to the analysis of materials technology innovation processes but also has many useful implications for policymaking. Suggestions for policymakers of the materials technology are presented.

• Journal of Korea Technology Innovation Society
• /
• v.6 no.4
• /
• pp.492-507
• /
• 2003

Material is enabling technology that creates the product performance and the service of most industrial sectors and fields of technology. However, compared to the other fields such as IT, BT, and NT etc., relatively little attention has been paid to the research on strategy and innovation of materials technology. This bias should have resulted in the misfit of policy and less than enough investment in materials innovation. This paper discusses the characteristics, process, and future of the materials innovation. The process and status of materials technology in Korea are analyzed based on the discussions above. Finally, some suggestions for R＆D strategies of Korea are presented on the basis of the nature, trend and barriers of materials innovation.

• Journal of Korea Technology Innovation Society
• /
• v.8 no.3
• /
• pp.1027-1059
• /
• 2005

The purpose of this paper is to analyze the dynamic characteristics of innovation sources such as scientific knowledges, processing technologies and user's needs in advanced metals technology. The journal articles data of four advanced materials are analyzed; amorphous metals, superplastic materials, shape memory alloys and aluminum-lithium alloy. Some regularities are found from the analysis of the four materials. The innovation proceeds through close interactions among the innovation sources. As the innovation proceeds, the relative importance of each source changes: scientific knowledge initiates the innovation and becomes the most important source in the first phase, then the processing technologies increase importance in the second phase, and then scientific knowledge, again, becomes the leading factor of innovation. Scientific knowledge and processing technology take turns leading the innovation. The impacts of users' needs to the innovation increase more and more as innovation proceeds. The results of analysis imply to the policy makers that emphasis of policy, and therefore the allocation of sources for innovation, should vary along the phases in the life cycle of advanced metals technology.

• Nano
• /
• v.13 no.12
• /
• pp.1850146.1-1850146.9
• /
• 2018

The rapid development of smart textiles requires the large-scale fabrication of conductive fibers. In this study, we develop a simple, scalable and low-cost capillary-driven self-assembly method to prepare conductive fibers with uniform morphology, high conductivity and good mechanical strength. Fiber-shaped flexible and stretchable conductors are obtained by coating highly conductive and flexible silver nanowires (Ag NWs) on the surfaces of yarn and PDMS fibers through evaporation-induced flow and capillary-driven self-assembly, which is proven by the in situ optical microscopic observation. The density of Ag NWs and linear resistance of the conductive fibers could be regulated by tuning the assembly cycles. A linear resistance of $1.4{\Omega}/cm$ could be achieved for the Ag NWs-coated nylon, which increases only 8% after 200 bending cycle, demonstrating high flexibility and mechanical stability. The flexible and stretchable conductive fibers have great potential for the application in wearable devices.

• Journal of the Korean Ceramic Society
• /
• v.54 no.6
• /
• pp.470-477
• /
• 2017

Ceramic processing to fabricate 3D complex ceramic structures is crucial for structural, energy, environmental, and biomedical applications. A unique process is ceramic stereolithography, which builds ceramic green objects from CAD files from many thin liquid layers of powder in monomer, which are solidified by polymerization with a UV laser, thereby "writing" the design for each slice. This approach directly writes layers in liquid ceramic suspension and allows one to fabricate ceramic parts and products having more accurate, complex geometries and smooth surfaces. In this paper, both UV curable materials and processes are presented. We focus on the basic material principles associated with free radical polymerization and rheological behavior, cure depth and broadening of cured lines, scattering at ceramic interface and their corresponding simulation. The immediate potentials for ceramic AM to change industry fabrication are also highlighted.

• Korean Journal of Metals and Materials
• /
• v.49 no.9
• /
• pp.686-691
• /
• 2011

To develop creep resistant die-cast Mg alloys, various alloying elements, including Ca, Ce, and Sr, were added to a Mg-Al alloy. The AXE710 alloy was produced on a 320 ton high-pressure die casting machine. The microstructure and creep properties of the alloy were examined. The creep behavior was investigated at $150^{\circ}C$ for stresses ranging from 50 to 100 MPa. The stress exponent was derived from the relationship between normalized secondary creep rates and compensated effective stresses. It was found to be 4.9, indicating that the dislocation climb is a dominant creep mechanism.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1575-1577
• /
• 2009

We have investigated the characteristics of transparent indium zinc oxide(IZO)/Ag/IZO multilayer electrode grown on polyethylene terephthalate (PET) substrates using a specially designed roll-to-roll sputtering system for use in flexible device are described. By the continuous R2R sputtering of the bottom IZO, Ag, and top IZO layers at room temperature, we were able to fabricate an IZO-Ag-IZO multilayer electrode with a sheet resistance of 6.15 ${\Omega}$/square, optical transmittance of 87.4 %, and figure of merit value of 42.03 10-3 ${\Omega}$-1. In addition, the IZO-Ag-IZO multilayer electrode exhibited superior flexibility to the RTR sputter grown single ITO electrode, due to the existence a ductile Ag layer between the IZO layers. This indicates that the RTR sputtered IZO-Ag-IZO multilayer is a promising flexible electrode that can substitute for the conventional single ITO electrode grown by bath type sputtering for use in low cost flexible device, due to its low resistance, high transparency, superior flexibility and fast preparation by the R2R process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.883-885
• /
• 2009

We proposed intriguing and simple technique for fabricating flexible plastic liquid crystal (LC) devices. We made a preliminary version of a flexible LC display employing this concept, and we confirmed this technique was useful for the flexible LC display; the electro-optical reproducibility of the flexible LC device fabricated here was remarkably improved against external perturbation compared with the conventional one.

• STI Policy Review
• /
• v.3 no.2
• /
• pp.152-171
• /
• 2012

In April 2001, many Japanese national institutes were reorganized as Independent Administrative Institutions (IAI) based on the General Act for Independent Administrative Institutions and the act for each institution. Under the Ministry of Education, Culture, Sports, Science and Technology (MEXT), the National Institute for Materials Science (NIMS) was established by the merger of the National Research Institute for Metals (NRIM) and the National Institute for Research in Inorganic Materials (NIRIM). One of the biggest changes was the expansion of autonomous administration. The nanotechnology and material R&D field was prioritized in the 2nd (2001-2005) and the 3rd (2006-2010) Science and Technology Basic Plans; subsequently, NIMS was assigned to take the initiative in nanotechnology as well as materials science. NIMS has proactively expanded research fields through the introduction of researchers from polymers, electronics, and biotechnology as well as member institutes of the World Materials Research Institute Forum (WMRIF). Globalization has been promoted through programs that include the International Center for Young Scientists (ICYS) and the International Center for Materials Nanoarchitectonics (MANA). The 4th Science and Technology Basic Plan (2011-2015) emphasizes outcomes-recovery and rebirth from the disaster, green innovation, and life innovation. The Midterm Plan for NIMS also follows it. R&D collaboration by multi-partners (that include industry, university, and GRI) should be strategically promoted where GRI are especially required to play a hub function for innovative R&D and open innovation. NIMS highlights are Tsukuba Innovation Arena (TIA) and the Nanotechnology Platform Project. On January 20, 2012, a new organization was decided on by the Japanese Government where several IAI from different science and technology areas will be merged to realize more effective R&D as well as administrative cost reductions. NIMS is also supposed to be merged with 4 other R&D IAI under MEXT by the end of 2013.