• Clean Technology
• /
• v.26 no.3
• /
• pp.228-236
• /
• 2020

Korea has an economy based on manufacturing industrial fields, which produce high amounts of hazardous wastes, in spite of few landfill candidates, and a significant concern for fine airborne particulates; therefore, traditional waste management is difficult to apply in this country. Moreover, waste collection and accumulation have recently been intensified by the waste import prohibitions or regulations in developing nations, the universalization of delivery services in Korea, and the global COVID-19 crisis. This study thus presents a domestic waste management strategy that aims to address the recent issues on waste. The contents of the strategy as the main results of the study include the (1) improvement of the compatibility of the classification codes between the domestic hazardous waste and the international ones such as those of the Basel Convention; (2) consideration of the mixed hazard indices to represent toxicity from low-content components such as rare earth metals often contained in electrical and electronic equipment waste; (3) management application based on risks throughout the life cycles of waste; (4) establishment of detailed material flow information of waste by integrating the Albaro system, Pollutant Release and Transfer Register (PRTR) system, and online trade databases; (5) real-time monitoring and prediction of the waste movement or discharge using positional sensors and geographic information systems, among others; and (6) selection and implementation of optimal treatment or recycling practices through Life Cycle Assessment (LCA) and clean technologies.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.2
• /
• pp.105-116
• /
• 2006

New eight times of minimum light of the near-contact binary EG Cep were presented. All times of minimum light for EG Cep, including ours, were collected and analyzed to study it's orbital period variation. It was found that the orbital period have varied in a cyclical way superposed on an upward parabola. A secular period increase of $3.22{\times}10^{-8}d/y$ was calculated. Under the assumption of a conservative mass transfer, it implied that the stellar gaseous material of about $3.18{\times}10^{-8}M_{\odot}$ /year is transferring from the less massive secondary component to the primary. The cyclical period variation was interpreted as light-time effect due to an unseen third body in the system. The resultant period, semi-amplitude and eccentricity of the light time orbit were calculated to be $38.^y4,\;0.^d0034$ and 0.29, respectively. The mass range of the tertiary proposed in the system is deduced to be quite small as $0.10M_{\odot}{\leq}M_3{\leq}0.21M_{\odot}$ for $i_3{\geq}30^{\circ}$.

• Journal of the Korea Concrete Institute
• /
• v.20 no.6
• /
• pp.697-704
• /
• 2008

This paper presents an analytical prediction of Nonlinear characteristics of prestressed concrete bridges by strengthened of externally tendon considering construction sequence, using unbonded tendon element and beam-column element based on flexibility method. Unbonded tendon model can represent unbounded tendon behavior in concrete of PSC structures and it can deal with the prestressing transfer of posttensioned structures and calculate prestressed concrete structures more efficiently. This tendon model made up the several nodes and segment, therefore a real tendon of same geometry in the prestressed concrete structure can be simulated the one element. The beam-column element was developed with reinforced concrete material nonlinearities which are based on the smeared crack concept. The fiber hysteresis rule of beam-column element is derived from the uniaxial constitutive relations of concrete and reinforcing steel fibers. The formulation of beam-column element is based on flexibility. Beam-column element and unbonded tendon element were be involved in A computer program, named RCAHEST (Reinforced Concrete Analysis in Higher Evaluation System Technology), that were used the analysis of RC and PSC structures. The proposed numerical method for prestressed concrete structures by strengthened of externally tendon is verified by comparison with reliable experimental results.

• Journal of Bio-Environment Control
• /
• v.26 no.3
• /
• pp.215-220
• /
• 2017

This study was conducted to improve the insufficiency of fruit vegetable grafting system developed by National Institute of Agricultural Sciences, Rural Development Administration. When the rotary blade cut the stem of scions and rootstocks, the grafting failure at curved cutting surfaces happened. The cutting depth of a tomato seedling by a rotated cutter was calculated 0.11 mm even when the cutting arm length and the maximum stem diameter were 50 mm and 5 mm, respectively. Mathematical analysis and high-speed photography showed that there was no problem by cutting in straight the stem of scions and rootstocks. The compression test of seedling stems to design the optimal shape of gripper showed that stems were not completely restored when they were compressed above 0.8 mm and 0.6 mm in case of rootstocks and scion, respectively. This study found that the bending angle of stem of tomato seedlings at the grafting period was 10 degree on average. The optimal gripper finger was the edge finger type which could be precisely set center point by adjusting the distance between fingers. In addition, it was found that most of seedling could be grasped without damage when the finger-to-finger distances is set to 2.5 mm for scion and 3.0 mm for rootstocks and finger are coated by 1 mm-thick flexible material.

• Journal of Chest Surgery
• /
• v.36 no.1
• /
• pp.21-25
• /
• 2003

Video-assisted thoracoscopic surgery (VATS) for decortication or debridement in the management of empyema thoracis has increased the available treatment options but requires validation. We present and evaluate our technique and experience with thoracoscopic management of pleural empyema, irrespective of chronicity. Material and Method : VATS debridement or decortication was performed with endoscopic shaver system in 40 consecutive patients presented with pleural space infections. A retrospective review was performed and the effect of this technique on perioperative outcome was assessed. Result : VATS evacuation of infected pleural fluid and decortication was successfully performed in 35 of 40 patients. The mean duration of preoperative symptoms before referral was 23$\pm$1.8 days. The mean duration of hospitalization before transfer was 13.5$\pm$1.5 days. Blood loss was 250 to 200 mL. Intercostal drainage was required for 5$\pm$3 days. The postoperative hospital stay was 5 $\pm$0.7 days. There were no operative mortalities. Conclusion : Video-assisted evacuation of infected pleural fluid and decortication is an effective modality in the management of the fibropurulent stage of empyema. An organized empyema should be approached thoracosco-pically, but may require open decortication.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.6
• /
• pp.991-998
• /
• 2008

This study is to determine the effects of PCM concentration on the temperature changes of the air layers of a garment when the environmental temperature changes. The selected PCM was Nonadecane and coated on cotton fabrics with PCM concentrations 10%, 20%, and 30%. The temperature changes of the air layers between fabrics were measured by Human-Clothing-Environment Simulator which measure a dynamic heat transfer. After stabilizing at $34^{\circ}C$ for 1 hour, the multi layered garment system were exposed to $5^{\circ}C$ or $10^{\circ}C$ for 30 minutes and then, exposed to $34^{\circ}C$ for 30minutes. The results like following could be obtained. When the environmental temperature changed high to low, temperature of the air layer increased by heating effect of PCM. In the contrast, when the environmental temperature changed low to high, the temperature increase of the air layer was delayed because of cooling effect by PCM. Also, the more concentration of PCM, the bigger the heating effect. Cooling effect showed more clearly at PCM concentration 20%. The temperature differences of the air layers between with PCM fabrics and with non-PCM fabrics were bigger at $10^{\circ}C$ than at $5^{\circ}C$. Consequently, though PCM has influenced on the temperature of the air layer by heating and cooling effect, those effects haven't shown in all layers equally. It was shown that the effect of PCM varied according to the layer in the case of multi layered garment system and heat gain as well as heat loss in the outermost layer had to be taken into account.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.642-648
• /
• 2019

This paper presents a fast back-type transfer device for snack food processing that uses the inertia of transferred material. A conventional conveying system is a drive system that uses a belt conveyor and mechanical crank, which generate noise and vibration and cause environmental pollution. Vibration and noise are reduced in the proposed fast back feeding device by using a counterweight. The crank drive unit was replaced with a linear servomotor, and an equilibrium device was designed to balance the force due to acceleration. This makes it is possible to adjust the forward and backward speed and acceleration through PLC control. A vibration damper device offsets the vibration force of the periodic shock form. The main cause of the vibration was identified through vibration analysis, and reduction measures were established. We verified the effectiveness of the vibration by making a prototype and performing about 10 vibration tests. Because no mechanical transducer is needed, energy loss, noise, and vibration do not occur, and the operating speed is not limited.

• Journal of Appropriate Technology
• /
• v.6 no.1
• /
• pp.37-44
• /
• 2020

Medical waste is any kind of waste that contains infectious material and recommended not to be transferred for infection control. As a means of disposal, incineration has better points than dumping or landfill in the quantity reduction, odorless and nonhazardous. However, open burning and incineration of health care wastes under bad circumstances, can result in the emission of environmental pollutants to air. A burial of biological waste brings pollution of soil and water. Most of sub divisional hospitals in Fiji transfer their medical wastes to divisional hospitals for incineration. In 2011, 62,518 kg of medical waste was incinerated in the three divisional hospitals. However, some medical wastes are considered as general waste and burnt or sent to landfill site, some are buried on site in some sub-divisional hospitals. In this regards, urgent education is necessary for awareness promotion to relevant personnel in medical waste treatment. On site incineration using small scale incinerator is more recommended than transportation of medical wastes treatment in Fiji. Moreover, remotely controllable and fixable small scale of incinerator is more desirable in sub-divisional hospitals. It is recommended that Fiji government to set up a legal framework for medical waste management (MWM), to develop specific guidelines for MWM, to set up a training system for MWM to ensure that all relevant personnel are trained, to develop a monitoring and supervision system for MWM, to clarify the future financing of MWM activities, and to improve the MWM infrastructure.

• Journal of Korean Port Research
• /
• v.6 no.1
• /
• pp.93-110
• /
• 1992

The most change in this century is supposed to be declination of ideology, and block of world economy. Addition to down full of cold war atmosphere around Northeast Asia, not only economic and social mood in this region is dramatically changed, but also it gave birth to the block of Northeast economy that accerlated new hub of world economy. According to dramatic change of economic surroundings the dynamic potential of growth in this region will be guided to enlarge inter-regional trade and increase volume of trade, thus suggests to grow steadily transportation. cargos in this region will have to arrange the system of delivery and inner transportation, accessary facilities, inter-regional harbors if North America and EC has connected easily. As have accerlated GATT and UR represented multilateralism and regionalism, it has regulated to increase trades of region due to relief of the trade barrier through specific areas has agreed with separately. The flow of regionalism of world economy has appeared to realize EC and NAFTA centered U.S.A, and also has presented to free trade region or one-size market agreement in Asia as APEC, EAEG in Malaysia, and etc. In defense to this block and internationalism of world economy, Pusan has to come forward to the hub of Northeast others has proposed a project to dominate the Northeast, Economy Association Agreement as Far East comprehensive development project in USSR, Hunchun development project in NK, and East Sea development project in PRC, Niigate regional development in Japan, Duman River development project in NK, and East Sea development project in Korea. As this exercise has proceed, Pusan also have arranged development strategy definitely and prepared provisions systematically. Engaging to participate center of delivery system is meant to be completed complex functions, namely the transfer storage processing & assembly function of international commodity. Pusan has ability to be terminal point of TSR. it had been connected to EC as the biggest economy block and TKR as complex transportation root to Far East, it would be the center of inground and seabase delivery terminal to Rotterdom as the biggest container pier and major piers to North-East and South East Asia. In order to provide a Role of 21 century's internationalization, Pusan has appealed to participate in management information research and development connected to Pohang-Ulsan-Changwon-Masan, and has utilized efficiently the resources such as man, material, money and information.

• Clean Technology
• /
• v.29 no.3
• /
• pp.185-192
• /
• 2023

This study was conducted to obtain basic process simulation data before conducting pyrolysis experiments for the development of a thermochemical conversion system by recirculation of heat carrier and gases thereby. In this study, polypropylene (PP) was used as a pyrolysis sample material as an alternative to waste plastics, and fluid sand was used as a heat transfer medium in the system. Manganese (Mn) was chosen as the catalyst for the pyrolysis experiment, and the catalyst pyrolysis was performed by impregnating it in the sand. The basic properties of PP were analyzed using a thermogravimetric analyzer (TGA), and liquid oil was generated through catalytic pyrolysis under a nitrogen atmosphere at 600℃. The carbon number distribution of the generated liquid oil was confirmed by GC/MS analysis. In this study, the effects of the presence and the amount of Mn loading on the yield of liquid oil and the distribution of hydrocarbons in the oil were investigated. When Mn/sand was used, the residue decreased and the oil yield increased compared to pyrolysis using sand alone. In addition, as the Mn loading increased, the ratio of C₆~C₉ range gasoline in the liquid oil gradually increased, and the distribution of diesel and heavy oil with more carbon atoms than C₁₀ in the oil decreased. In conclusion, it was found that using Mn as a catalyst and changing the amount of Mn could increase the yield of liquid oil and increase the gasoline ratio in the product.