• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.6
• /
• pp.541-549
• /
• 2008

The fatigue analysis is performed to avoid structural failure in aerospace structures under repeated loads. In this paper, the fatigue life is estimated for the design of tilt rotor UAV. First of all, the fatigue load spectrum for tilt rotor UAV is generated. Fatigue analysis is done for the flaperon joint which may have FCL(fracture critical location). Tilt rotor UAV operates at two modes: helicopter mode such as taking off and landing; fixed wing mode like cruising. To make overall fatigue load spectrum, FELIX is used for helicopter mode and TWIST is used for fixed wing mode. The other hand, the Kriging meta model is used to get S-N regression curve for whole range of material life when S-N test data are analyzed. And then, the second order of S-N curve is accomplished by the least square method. In addition, the coefficient of determination method is used to ensure how accuracy it has. Finally, the fatigue life of flaperon joint is compared with that obtained by MSC. Fatigue.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.220-220
• /
• 2013

Surface-normal transmission electro-absorption modulator (EAM) are attractive for high-definition (HD) three-dimensional (3D) imaging application due to its features such as small system volume and simple epitaxial structure [1,2]. However, EAM in order to be used for HD 3D imaging system requires uniform modulation performance over large area. To achieve highly uniform modulation performance of EAM at the operating wavelength of 850 nm, it is extremely important to remove the GaAs substrate over large area since GaAs material has high absorption coefficient below 870 nm which corresponds to band-edge energy of GaAs (1.424 eV). In this study, we propose and experimentally demonstrate a transmission EAM in which highly selective backside etching methods which include lapping, dry etching and wet etching is carried out to remove the GaAs substrate for achieving highly uniform modulation performance. First, lapping process on GaAs substrate was carried out for different lapping speeds (5 rpm, 7 rpm, 10 rpm) and the thickness was measured over different areas of surface. For a lapping speed of 5 rpm, a highly uniform surface over a large area ($2{\times}1\;mm^2$) was obtained. Second, optimization of inductive coupled plasma-reactive ion etching (ICP-RIE) was carried out to achieve anisotropy and high etch rate. The dry etching carried out using a gas mixture of SiCl4 and Ar, each having a flow rate of 10 sccm and 40 sccm, respectively with an RF power of 50 W, ICP power of 400 W and chamber pressure of 2 mTorr was the optimum etching condition. Last, the rest of GaAs substrate was successfully removed by highly selective backside wet etching with pH adjusted solution of citric acid and hydrogen peroxide. Citric acid/hydrogen peroxide etching solution having a volume ratio of 5:1 was the best etching condition which provides not only high selectivity of 235:1 between GaAs and AlAs but also good etching profile [3]. The fabricated transmission EAM array have an amplitude modulation of more than 50% at the bias voltage of -9 V and maintains high uniformity of >90% over large area ($2{\times}1\;mm^2$). These results show that the fabricated transmission EAM with substrate removed is an excellent candidate to be used as an optical shutter for HD 3D imaging application.

• Journal of Preventive Medicine and Public Health
• /
• v.22 no.3 s.27
• /
• pp.406-422
• /
• 1989

This study is aimed at developing a nutritional task of a community' as a public health activities of Su-Dong Myun, Demonstration Project area of Ewha Womans University. The content of this study is the points of nutritional diagnosis for the residents nutritional evaluation, the analysis of the related factors and the educational material with Nutrition Education-Index. Two hundreds housewives were examined during the period of Jan. 20 to Jan. 30 in 1989. 1. In terms of the housewives' age, those aged 30 to 39 were 32.5% which was the highest and educational level, graduation of primary school was 31.5% which was the highest. The housewives who had no job were 60.0% and those who participated in community activities were 56.5%. 2. In terms of the points of nutritional diagnosis, 50 to 74 points were 51.5% which was the highest and total average was $65.1{\pm}15.0$. 3. As for the points of nutritional knowledge, the average was 54.9 points, attitude was 77.4 points and eating practice was 70.8points. 4. The number of clinical symptoms of nutritional deficiency was 16.1 ones per person. 5. As for the relation which nutritional knowledge, attitude, eating practice exert on one another, nutritional knowledge has negative correlation with eating practice(-0.04) and attitude has some correlation with eating practice(0.17). 6. The variable having to do with the points of nutritional diagnosis showed the highest correlation coefficient(0.55) as the points of nutritional knowledge. 7 As for the variable having to do with the number of the symptoms of nutritional deficiency, the higher points of knowledge(-0.05) is, the higher the totai averse points of nutritional diagnisis(-0.09) is, negative correlation was appeared. 8. The result in which the variant having to do with the number of clinical symptoms of nutritional deficiency was analyzed by multiple regression analysis showed that the lack of time for preparing meals in non agricultural households made the greatest contribution (9% explained) and the households having vegetable garden made the second greatest contribution(3% explained).

• Journal of Life Science
• /
• v.12 no.3
• /
• pp.256-263
• /
• 2002

This study was carried out to estimate the degree of heterosis and heterobeltiosis, and the heritability and genetic correlation in F$_1$hybrid produced by reciprocal crosses between two six-rowed hulled barley (Gangbori and Olbori) and three six-rowed naked barley (Saechalssalbori, Saessalbori, and Moodeongssalbori). Heterosis was observed positively in traits such as cults length, spike length, awn length, leaf length, leaf width, number of spikes per plant, number of grains per spike, and 1000 grain weight. Heterosis and heterobeltiosis from the crosses with hulled barley as a material parent showed higher performance in culm length, leaf length, leaf width, number of spike per plant, number of grains per spike. The hulled grain characteristics is dominant over the naked one. The highest heritability was confirmed in leaf width with a value of 94.5% and overall high heritability was observed in most traits with the range from 76.7% to 94.5%. In an analysis of correlation coefficient, higher genetic correlations were observed between leaf length and number of spikes per plant(0.970), between cults length and number of grains per spike(0.963), and between awn length and leaf length(0.862) in the forward crosses in which hulled barley was maternal. In the reverse crosses, higher genetic correlation was observed between culm length and spike length(0.926), between awn length and leaf length(0.922), and between number of spikes per plant and number of grains per spike(0.713).

• Hwankyungkyoyuk
• /
• v.13 no.1
• /
• pp.133-141
• /
• 2000

This study was designed for middle school students in Su-Won City to find out their level of hope in environmental education and who had not been introduced to environmental skills and knowledge as a separate subject in their school curriculum. Additionally, the result of the study was expected to provide basic environmental education material to teachers who are on the front line in our environmental education efforts. The mother used to be very influential on her children's thinking and behavior to a large degree. Acknowledging these facts, students and their mothers were chosen for this study The questionnaire from each of the two groups were compared and studied. The questionnaire, comprised of 23 questions, was completed during the period of time from March 6 through March 11, 2000. The schools that participated in the study were 5 junior high schools in Su-Won City and the participants were students and their mothers. The questionnaires were given to 450 students and their mothers to be completed and returned. A total of 379 student questionnaires and 323 mother questionnaires were received for examination. The results of questionnaire were analyzed by using SPSS/PC 8.0 software program with Frequencies Analysis, Mean Analysis, Reliability Analysis, Correlation Analysis, Paired Samples T-test, and $\chi$$^2$-test. The questionnaires generated the following results. The reliability coefficient was 0.847 from the students and 0.895 from the mothers. The level of interest in an environmental education curriculum was 24.3% from students and 86.0% from mothers. Interestingly, the gender difference of level of interest in an environmental education curriculum was 25.7% from male and 23.1% from female. The difference in the environmental function levels between female and male students was statistically significant(t=-4.109, p<0.001). For mathematical skills in environmental functions, the students and mothers thought trash, air pollution, and lack of forest were problems however they showed inactive support and unreasonable attitudes toward the problems that they themselves pointed to for solving the problems. Under the environmental problems solving issue, the significance between two groups was 0.014(P<0.001) and the result dictates there was no correlation. The t-test showed no difference in environmental knowledge level between student genders. The knowledge level between students and mothers was related each other. The Paired Sample t-test between students versus mothers on environmental skills and knowledge was 0.000*(*P<0.001) and it showed there was correlation between the two groups. With this study, educating mothers should be noticed as a great priority in environmental education that will lead to a more positive environmental outlook from our students.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.793-797
• /
• 2010

The investigations were conducted to improve the physical properties by analyzing physico-chemical properties on the different soil families of textures at 20 upland fields located in the parts of Gyengsangbuk-do area. Soil physico-chemical properties were analyzed for bulk density, hardness, porosity, moisture, pH, EC and organic mater by soil depth on the different soil families of textures. Bulk density distributions were higher than 1.2 Mg $m^{-3}$ in the optimum range. Hardness distributions were lower than 20 mm in the optimum range. Therefore, the physical properties of upland soil was deteriorated. Correlation coefficient of bulk density with hardness and organic mater were higher significantly, that was positive and negative, respectively. The soil hardness had the greatest distribution degree to the crop yield and bulk density and organic matter followed. Conclusively, To improve the physical properties of upland soil was more effective to fertilizing organic matter than other ways.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.29-34
• /
• 2019

Silicon carbide is considered to be a potentially useful material for high-temperature electronic devices, as its large energy band gap and the p-type and/or n-type conduction can be controlled by impurity doping. Particularly, electric conductivity of porous n-type SiC semiconductors fabricated from ${\beta}-SiC$ powder at $2000^{\circ}C$ in $N_2$ atmosphere was comparable to or even larger than the reported values of SiC single crystals in the temperature region of $800^{\circ}C$ to $1000^{\circ}C$, while thermal conductivity was kept as low as 1/10 to 1/30 of that for a dense SiC ceramics. In this work, for the purpose of decreasing sintering temperature, it was attempted to fabricate porous reaction-sintered bodies at low temperatures ($1400-1600^{\circ}C$) by thermal decomposition of polycarbosilane (PCS) impregnated in n-type ${\beta}-SiC$ powder. The repetition of the impregnation and sintering process ($N_2$ atmosphere, $1600^{\circ}C$, 3h) resulted in only a slight increase in the relative density but in a great improvement in the Seebeck coefficient and electrical conductivity. However the power factor which reflects the thermoelectric conversion efficiency of the present work is 1 to 2 orders of magnitude lower than that of the porous SiC semiconductors fabricated by conventional sintering at high temperature, it can be stated that thermoelectric properties of SiC semiconductors fabricated by the present reaction-sintering process could be further improved by precise control of microstructure and carrier density.

• Journal of Food Hygiene and Safety
• /
• v.34 no.1
• /
• pp.52-57
• /
• 2019

Method development and validation of decursin for the standardization of Angelica gigas Nakai as a functional ingredient and health food were accomplished. The quantitative determination method of decursin as a marker compound of aerial parts of Angelica gigas Nakai extract (AAGE) was optimized by HPLC analysis using a C18 column ($3{\times}150mm$, $3{\mu}m$) with 0.1% TFA in water and acetonitrile as the mobile phase at a flow rate of 0.5 mL/min and detection wavelength of 330 nm. The HPLC/PDA method was applied successfully to quantification of the marker compound in AAGE after validation of the method with linearity, accuracy, and precision. The method showed high linearity in the calibration curve at a coefficient of correlation ($R^2$) of 0.9994 and the limit of detection and limit of quantitation were $0.011{\mu}g/mL$ and $0.033{\mu}g/mL$, respectively. Relative standard deviation (RSD) values of data from intra- and inter-day precision were less than 1.10% and 1.13%, respectively. Recovery of decursin at 0.5, 1, 5 and $10{\mu}g/mL$ were 92.38 ~ 104.11%. These results suggest that the developed HPLC method is very useful for the determination of marker compound in AAGE to develop a health functional material.

• Journal of the Korean Society of Earth Science Education
• /
• v.12 no.1
• /
• pp.64-81
• /
• 2019

The purpose of this study is to analyze elementary science gifted students' characteristics of the thinking in the problem solving process through a MEA(Model Eliciting Activity)activity. The subjects of this study are 40 elementary science gifted students who passed the first screen for the admission to the science gifted education institute in P university in 2018. The MEA activity was 'Coffee cup challenge', which is to find the best way to place cup side and bottom to save paper in a given material. Three drawings from each student and explanations of each drawing through out the design process were collected as the main data source. The data were analyzed by statistically (correlation coefficient) and qualitatively to find the relationship between; 1) the intuitive thinking and visual representation and 2) analytical thinking ability and communication skills that reflect MEA activities. In conclusion, first, intuitive thinking plays an important role in the ability of visual representation through pictures and the whole problem solving process. Second, the analytical thinking and elaboration process which are reflected through reflection on the arrangement of the drawings have a great influence on the communication skills. Therefore, this study investigated that MEA activities are useful activities to stimulate both intuitive and analytical thinking in elementary science gifted students, and to develop communication ability, by organizing their own ideas and providing learning opportunities for various solutions.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.1
• /
• pp.86-101
• /
• 2012

The constituting rocks of Multi-storied Round shape stone Pagoda of Unjusa Temple are lithic tuff and rhyolite tuff breaccia which show green or grey and also rock fragment with poor roundness are present in the structure. lithic tuff is composed of feldspar and quartz which are glassy texture and cryptocrystalline and also micro crystalline are scattered. phenocryst quartz and feldspar in the substrate composed of feldspar and opaque minerals are found in rhyolite tuff breaccia. dust, exfoliation, cavity, fracture and crack are observed in all the stone of the pagoda and the result of Infrared Thermography shows partial inter cavities have developed severely which may cause further exfoliation. In addition, a great deal of various grey, green, and yellow brown lichen as well as bryophyte are present at the upper part of eastern and western roof stone located above the third floor. Discolors remarkably shown at stereobate and roof stone are identified as inorganic pollutants such as manganese oxide, iron oxide and iron hydroxide. The stone of the pagoda of the Chemical Index of Alteration (CIA) and the Weathering Potential Index (WPI) are 55.69 and 1.12 respectively and this corresponds to a highly weathered stage. The measured values, average ultrasonic velocity 2,892m/s, coefficient of weathering 0.4k and compressive strength $1,096kg/cm^3$, suggest that the rock strength and durability are weakened.