• 한국조경학회지
• /
• 제33권4호
• /
• pp.79-96
• /
• 2005

This study is to suggest the technique of ecological park to compatible mountain ecosystem near the urban in Woomyeonsan Urban Nature Park. It was proposed to differential technique from established ecological park focused on changing the cognition of nature, wetland ecosystem protection and restoration, and studying by served sound leisure program(nature observation and experience, etc.), in compatible mountain and urban forest near the Urban. Firstly, to achieve this aim, it was carried out delicated research and analysis that were the angle of inclination, trail, fauna, actual vegetation, bird and insect, and then to selected nature trail course and analysis capability through it.. In the basic concept and plan, firstly to make park aid mark and foundation mark, and then to establish the detail programs, nature observation program, management and organization program. This site where valley and mountain coexist was highly capable but whole site was very steep, so usable area is very narrow. To make Woomyeonsan nature ecological park escape from the established wetland type, ecological park and the park of event have to use nature material and introduce visitor. To establish it as the Nature Culture observation park and reflect on forest, valley of Woomyeonsan was divided into three display places; Nature ecosystem Zone, Meditation Zone, Nature Culture experience Zone and Nature Culture observation Center. For satisfying with ecological park aid mark and foundation mark, it was proposed to settle management plan for volunteer control and organization composition.

• Advances in nano research
• /
• 제15권3호
• /
• pp.215-224
• /
• 2023

Nonlinearity plays an important role in control systems and the application of design. For this reason, in addition to linear vibrations, nonlinear vibrations of the stepped nanobeam are also discussed in this manuscript. This study investigated the vibrations of stepped nanobeams according to Eringen's nonlocal elasticity theory. Eringen's nonlocal elasticity theory was used to capture the nanoscale effect. The nanoscale stepped Euler Bernoulli beam is considered. The equations of motion representing the motion of the beam are found by Hamilton's principle. The equations were subjected to nondimensionalization to make them independent of the dimensions and physical structure of the material. The equations of motion were found using the multi-time scale method, which is one of the approximate solution methods, perturbation methods. The first section of the series obtained from the perturbation solution represents a linear problem. The linear problem's natural frequencies are found for the simple-simple boundary condition. The second-order part of the perturbation solution is the nonlinear terms and is used as corrections to the linear problem. The system's amplitude and phase modulation equations are found in the results part of the problem. Nonlinear frequency-amplitude, and external frequency-amplitude relationships are discussed. The location of the step, the radius ratios of the steps, and the changes of the small-scale parameter of the theory were investigated and their effects on nonlinear vibrations under simple-simple boundary conditions were observed by making comparisons. The results are presented via tables and graphs. The current beam model can assist in designing and fabricating integrated such as nano-sensors and nano-actuators.

• Tribology and Lubricants
• /
• 제32권4호
• /
• pp.113-118
• /
• 2016

As an economic, high quality, and highly reliable gear with low noise and low vibration is demanded, an overall finite element analysis regarding a gear is required. Also, an infrared thermography test, which is a quantitative testing technique, is demanded for safety and longer lifespan of gear products. In order to manufacture a gear product or to determine safety of a gear being used, it is necessary to precisely determine ingredients of a material constituting a gear and detect any internal defect. This study aims to realize a design that minimizes the spur gear displacement with respect to power during its rotation and ensures the spur gear control capacity by using a 3D model and the midasNFX program. This facilitates the assessment of the possibility of cracking by evaluating the stress intensity and focusing on the integrity of the spur gear. We prepare the specimen of the spur gear based on the possibility of cranking as per the result of the structural interpretation from an infrared ray thermal measuring technique. After cooling the spur gear, we perform experiments using thermography and halogen lamps and analyze the temperature data according to the results of the experiment. In the experiment which we use thermography after cooling, we find a rise in the temperature of the room. As a result, the defective part show temperatures lower than their surroundings while the normal parts have temperatures higher than the defective parts. Therefore, it possible to precisely identify defective part owing to its low temperature.

• 한국안전학회지
• /
• 제34권4호
• /
• pp.22-31
• /
• 2019

The flammable liquid conductivity is an important factor in determining the generation of electrostatic in fire and explosion hazardous areas, so it is necessary to study the physical properties of flammable liquids. In particular, the relevant liquid conductivity in the process of handling flammable liquids in relation to the risk assessment and risk control in fire and explosion hazard areas, such as chemical plants, is classified as a main evaluation item according to the IEC standard, and it is necessary to have flammable liquid conductivity measuring devices and related data are required depending on the handling conditions of the material, such as temperature and mixing ratio for preventing the fire and explosion related to electrostatic. In addition, IEC 60079-32-2 [Explosive Atmospheres-Part 32-2 (Electrostatic hazards-Tests)] refers to the measuring device standard and the conductivity of a single substance. It was concluded that there is no measurement data according to the handling conditions such as mixing ratio of flammable liquid and temperature together with the use and measurement examples. We have developed the measurement reliability by improving the structure, material and measurement method of measuring device by referring to the IEC standard. We have developed a measurement device that is developed and manufactured by itself. The test results of flammable liquid conductivity measurement and the data of the NFPA 77 (Recommended Practice on Static Electricity) Annex B Table B.2 Static Electric Characteristic of Liquids were compared and verified by conducting the conductivity measurement of the flammable liquid handled in the fire and explosion hazardous place by using Measuring / Data Acquisition / Processing / PC Communication. It will contribute to the prevention of static electricity related disaster by taking preliminary measures for fire and explosion prevention by providing technical guidance for static electricity risk assessment and risk control through flammable liquid conductivity measurement experiment. In addition, based on the experimental results, it is possible to create a big data base by constructing electrostatic physical characteristic data of flammable liquids by process and material. Also, it is analyzed that it will contribute to the foundation composition for adding the specific information of conductivity of flammable liquid to the physical and chemical characteristics of MSDS.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권6호
• /
• pp.73-84
• /
• 2015

Nine plant species were selected through vegetation survey at three military shooting ranges at northern Gyeonggi Province. Plants were germinated in normal soil and three seedlings were transplanted to a bottom sealed pot containing sandy loam soils contaminated with either RDX (291 mg/kg) or TNT (207 mg/kg). Planted, blank (without plant), and control (without explosive compound) pots were grown in triplicate at a green house for 134 days. During cultivation, transplanted plants exhibited chlorosis and necrosis in flower and leaf by explosive toxicity and stress. Only three plants, Wild soybean, Amur silver grass, Reed canary grass, survived in TNT treated pot, while seven plant species except for field penny cress and jimson weed, thrived in RDX treated pot. Appreciable amount of TNT (61.6~241.2 mg/g-D.W.) was detected only in plant roots. Up to 763.3 mg/g-D.W. along with 4-amino-2,6-dinitrotoluene, an intermediate of TNT, accumulated in the root of wild soybean. In addition, azoxy compounds, abiotic intermediates of TNT, were detected in TNT treated soils. RDX absorbed average 1,839.95 mg/kg in shoot and 204.83 mg/kg in root. Most of TNT in plant was accumulated in underground part whereas RDX was localized in aerial part. Material balance calculation showed that more than 95% of the initial TNT was removed in the planted pots whereas only 60% was removed in the blank pot. The amount of RDX removed from soil was in the order of Amur Silver Grass (51%) > Chickweed (43%) > Evening primrose (38%). Based on the results of pot cultures, Amur silver grass and Reed canary grass are selected as tolerant remedial plants for explosive toxicity.

• 한국수산과학회지
• /
• 제27권4호
• /
• pp.413-433
• /
• 1994

진해만은 빈산소로 인한 수산생물의 생산성 저하가 현저하다. 본 연구에서는 진해만의 수질환경개선 및 회복을 위해서 빈산소 수괴의 형성방지가 무엇보다도 중요하다고 생각되어 해수유동 및 물질순환 모델을 이용하여 빈산소 수괴 형성상태를 재현하였고, 주요 오염부하가 용존산소에 미치는 영향의 정도를 예측하여 어장환경 관리방안을 도출한 결과는 다음과 같다. 저층의 용존산소 농도분포는 수온 및 밀도성층과 밀접한 관계를 가지고 변동하였고 수온성층이 가장 강했던 $6{\sim}7$월에 양식어장이 밀집된 진해만 서부해역과 마산만 해역에서 2.0mg/l이하의 빈산소 수괴가 형성되었다. 해수유동 모델에 의한 $M_2$분조 계산결과 창조시 유향의 주류는 가덕수로를 통하여 서쪽으로 이동하였고 일부는 마산만으로 유입되었으며, 낙조시는 반대방향이었다. 최강유속은 가덕수로 부근에서 발생하였고 진동만, 고현성만, 원문만등의 진해만 서부해역과 마산만에서는 5cm/sec이하로 미약하였다. 항유는 만 중앙부와 칠천도 사이에서 반시계방향의 환유가 형성되는 것이 특징적이었으며, 마산만이나 당황만 입구 부근에서는 표층의 경우 남향의 흐름이 나타났고, 저층에서는 북향의 흐름이 형성 되었다. 물질순환 모델의 보정결과 상관성은 0.85이상을 보였고 상대오차는 $28\%$이하의 범위내에서 여름철의 빈산소 수괴를 재현하였다. 각종 오염부하가 용존산소에 미치는 영향의 정도와 범위를 시뮬레이션을 통하여 예측한 결과 SOD가 전지역에 걸쳐 가장 큰 영향을 나타내었고 ,마산만의 유입부하도 용존산소 분포에 큰 영향을 미쳤으나 마산만내 국한되어 나타났으며, 양식생물에 의한 부하는 영향도 적었고 진해만 서부해역에 국한되었다. 빈산소 수괴가 강하게 형성되는 마산만과 진해만 서부해역의 빈산소 수괴 형성방지를 위해 효율적인 오염저감 대책으로서 마산만의 경우 유입 COD부하와 SOD를 저감해야하며, 진해만 서부해역의 경우 SOD가 주가 되어야 함을 알 수 있었다. 회복시켜야 할 용존산소 농도를 해역II등급인 5.0mg/l의 농도를 유지시키기 위해서는 마산만의 경우 유입되는 COD 부하를 $50\%$, SOD를 $70\%$로 저감해야 하며, 진해만 서부해역의 경우 SOD를 $95\%$, 양식생물 오염부하를 $90\%$까지 저감해야 되는 것으로 나타났다.

• Journal of Periodontal and Implant Science
• /
• 제23권3호
• /
• pp.400-410
• /
• 1993

Dental implants have been widely used in the treatment of esthetic and functional problems of the mouth due to alveolar bone loss, after tooth extraction. The success of implantation strongly depends on osseointegration. For osseointegration, implant material, methodology, and design have been investigated. For materials, two popular materials at present are titanium and hydroxyapatite. For methods, immediate implantation is being used recently. The purpose of this study is to evaluate osseointegration between the unthreaded cylindrical TPS implant and the HA-coated implant by a histomorphometric analysis. For this analysis, experimental periodontits was induced on the 3, 4 premolars of adult dogs by the ligation of orthodontic threads. Thereafter, each tooth was extracted. TPS. Implants and HA-coated implants were immediately inserted in the extraction socket. In control group, TPS implants were immediately inserted, and In experimental group, HA implants were immediately inserted. The dogs were sacrificed after 12 weeks, then the specimens were prepared for LM and histomorphometric analysis. The conclusion of this study is as follows l. In both control and experimental group, no inflammatory cells were observed. 2. The results of the histomorphometric analysis showed that the total osseointegration was 48.5% in control group, and 68.8% in expermental group. The experimental group was higher than the control group, and the difference was not statistically significant (p<0.05). 3. The results of the histomorphometric analysis showed that the osseointegration in the hole was 40.6% in control group, and 70.2% in experimental group. The experimental group was higher than the control group, and the difference was statistically significant (p<0.05). In both control and experinental group, no inflammatory cells were observed. 4. The results of the histomorphometric analysis showed that the osseointegration in the lower part was 52.1% in control group, and 73.3% in experimental group. The experimental group was higher than the control group, and the difference was statistically significant (p<0.05). 5. In experimental group, the bone to HA interface seemed to be mixed of bone and HA. We could not distinguish HA from the bone. The HA coating was detached from the titanium surface.

• Tribology and Lubricants
• /
• 제25권5호
• /
• pp.330-334
• /
• 2009

Hydraulic servo cylinders have been used to control accurately a large machine in power plant. Especially, Piston head and bush of servo cylinder is assembled sleeve and piston head and bush made of Cu alloy and pad sealing part. A damages of sleeve and piston head, bush are caused by friction and wear. Thus, It is necessary to examine friction and wear characteristics of Cu alloys for the piston head and bush. In this study, to be reliable on the piston and cylinder parts, dry friction and wear experiments were carried out with Cu alloys of four kinds of AlBC, PBC, BC and BS using reciprocating friction tester of pin on disk type. From this study, the result was shown that the AlBC and PBC with alloy elements were excellent to resistance wear. As the sliding speed was increased, the wear loss of PBC decreased than another Cu alloy.

• 한국패션뷰티학회지
• /
• 제4권3호
• /
• pp.18-24
• /
• 2006

Hair is the part of body which expresses man into more manlike. When we create some artworks, we need the most suitable material for the artworks. Similarity, the healthy scalp hair condition and treatment are required to keep our hair clean and healthy. And the improper condition of scalp hair prohibits our hair from normal growing, proceeds the alopecia(loss of hair) and double our physical and mental stresses. The necessity of health treatment of scalp hair which was damaged by frequent permanent hair wave and hair coloring is on the rise. This study will present how to control and treat the scalp hair and will check how we feel about the necessity of scalp hair treatment. This study finally shows that people think their scalp hair conditions are not normal and chemically treated hair in spite of their natural hair. However, most people think that the scalp hair treatment is very useful to their hair and this result enables us to predict the future market of the scalp hair treatment business will be growing day by day. We need to study further not only scalp hair treatment but also prevention stage in order to keep the healthy hair and will check how we feel about the necessity of scalp hair treatment.

• 대한음성언어의학회:학술대회논문집
• /
• 대한음성언어의학회 2003년도 제19회 학술대회
• /
• pp.181-181
• /
• 2003

Objectives : Vocal fold augmentation using injectable material is an easy and simple operation. This study is to evaluate the histology of minced and injected autologous auricular cartilage and fat graft in the augmentation of unilateral vocal fold paralysis using a canine model for two years. Study Design : A prospective study with the contralateral side of the larynx used as the control Methods : Twelve dogs were operated. At first, a piece of auricular cartilage was harvested from ear and minced into tiny chips with a scalpel and scissors. And also, a piece of fat tissue was harvested from inguinal area and minced into tiny chips with a scalpel and scissors. The minced cartilage and fat-paste (0.2ml) was injected using a pressure syringe into the paralyzed thyroarytenoid muscle under direct laryngoscopy. Two animals were sacrificed at 3 days, three at 3 weeks. two at 3 months. one at 6 months, one at 12 months, three at 24 months. Each dog underwent laryngectomy and serial coronal sections of paraffin blocks from the posterior part of the vocal fold were made. Result : There was no significant complication perioperatively and during follow-up. There was acute inflammatory findings in the graft at 3 days and 3 weeks. Only a very small proportion of the injected cartilage was absorbed due to the degenerative change and the overall volume was preserved even when the cells died out. The injected cartilage remained in the larynx until 24 months. Conclusion : The autologous cartilage implant using auricular cartilage was the ideal vocal cord augmentative material for the treatment of glottic incompetence.