이중에너지 전산화단층촬영으로 뼈를 검사하여 다양한 keV와 조영제 물질 억제(material suppression iodine; MSI), 물질구분(material decomposition; MD)기법을 적용하였을 때, 단일에너지 전산화단층촬영과 비교 평가함으로써 칼슘 부피의 변화를 파악하고자 하였다. 인체유사 팬톰을 이용하여 단일에너지 전산화단층촬영의 영상을 기준으로 이중에너지 전산화단층촬영의 각각 70 keV, 100 keV, 140 keV 및 70 keV-MSI와 MD 칼슘강조-물제거(material calcium weighting; MCW)와 MD 요오드강조-물제거(material iodine weighting; MIW)기법을 적용한 후, 칼슘의 부피를 Agatston score 값으로 비교 평가하였다. 인체유사 팬톰의 칼슘 부피는 keV가 증가할수록 감소하였다(p<0.05). 가장 유사한 이중에너지 전산화단층촬영 집단은 70 keV로 그 차이는 각각 갈비뼈 $35.8{\pm}12.2$, 대퇴골 $16.1{\pm}24.1$, 골반 $13.7{\pm}18.8$, 척추 $179.0{\pm}61.8$이었다. 그러나 MSI의 부피는 부위별로 각각 갈비뼈 5.55%, 대퇴골 76.34%, 골반 55.16%, 척추 87.58%가 감소하였고, MD(MCW)는 각각 갈비뼈 55.96%, 대퇴골 80.78%, 골반 69.64%, 척추 54.23%가 줄었으며, MD(MIW)는 각각 갈비뼈 83.51%, 대퇴골 87.68%, 골반 86.64%, 척추 82.62%의 차이로 감소되었다(p<0.05). 이중에너지 전산화단층촬영으로 검사 시, 뼈의 부피는 keV의 증가에 따라서 감소하게 되고 약 70 keV의 에너지 영역에서 CSCT 집단과 유사한 부피로 측정할 수 있다. 그리고 MSI와 MD의 임상기법을 적용한 부피측정은 상당한 오차가 발생하므로 유의하여 사용하여야 한다.
본 연구에서 검토한 지오텍스타일 컨테이너와 튜브를 활용한 수로구조물은 UAE에서 수행한 프로젝트로 수심이 4.0m 이하인 경우 지오텍스타일 컨테이너를 저개식 바지로부터 해저바닥에 착지시키는 방법으로 시공하고 그 윗부분은 지오텍스타일 튜브로 시공을 수행하였다. 따라서, 본 연구에서는 지오텍스타일 컨테이너와 튜브를 활용하여 해상의 발전소 방파제 수로구조물 축조 시 고려된 구조물의 개별 및 다단구조물의 안정성, 지오텍스타일 재질 선택에 관련한 설계인자를 분석하였다. 또한, 방파제 구조물이 위치한 현장이 발전소의 용수의 유입과 유출이 발생하는 구역으로 발전소 유출입수의 온도가 방파제 구조물 내부의 온도변화에 미치는 영향에 대하여 분석하였다.
Tungsten inert gas (TIG) welding is commonly used in industries that require airtightness, watertightness, oiltightness, and precision. It is a non-consumable welding method that is commonly used for the welding of non-ferrous metals, but it can be used to weld most metals. The methods of TIG welding can be divided into three types. The first, manual welding is done directly on the metal by a welder with a torch. The second, semi-automatic welding, gets help from a material supplying machine, but it is conducted by a welder. Lastly, automated welding is conducted fully by a machine during its process and operation. Depending on the selection of electrode, the amount of heat that is applied to the base material and the electrode rod changes and makes the shape of welded parts different. A direct-current positive electrode was used for this study. Through the change of shielding gas type on a structural steel (SS-400) that is commonly used in industry, the composition and shape changes in welded parts were detected after welding. The heat-affected area, hardness value, and tensile strength were also identified through hardness testing and tensile testing. In this study, it was found that the higher hardness value of the heat-affected is, the weaker the tensile strength becomes.
Demand for optical glass device used for lighting could increase rapidly because of LED lighting market growth. The optical glass devices that have been formed by hot press molding process the desired optical performance without being subjected to mechanical processing such as curve generation or grinding. EL-Max material has been used for many engineering applications because of their high wear resistance, high compressive strength, corrosion resistant and very good dimensional stability. EL-Max is very useful for a glass lens mold especially at high temperature and pressure. The performance and reliability of optical components are strongly influenced by the surface damage of EL-Max during grinding process. Therefore, the severe process condition optimization shall be necessary for the highly qualified EL-Max glass lens mold. To get the required qualified surface of EL-Max, the selection of type of the diamond wheel is also important. In this paper, we report best grinding conditions of ultra-precision grinding machining. The grinding machining results of the form accuracy and surface roughness have been analyzed by using Form Talysurf and NanoScan.
Sen, Ratna;Nataraju, B.;Balavenkatasubbaiah, M.;Premalatha, V.;Thiagarajan, V.;Datta, R.K.
International Journal of Industrial Entomology and Biomaterials
/
제9권1호
/
pp.35-40
/
2004
Bombyx mori densonucleosis virus type 1 (BmDNV1)- a non occluded virus causes flacherie disease in the susceptible stocks of the silkworm, Bombyx mori. However, some stocks are non-susceptible. Non-susceptibility to BmDNV1 in B. mori is a unique case where the virus infection is completely inhibited by a single gene of the host. A survey conducted by this institute in some parts of Karnataka state has revealed that, 43.05% of the total incidence of flacherie disease caused by non-occluded viruses, are due to the synergistic infection of B. mori densonucleosis and infectious flacherie virus. Earlier study indicated that rearing of BmDNV1 resistant silkworm stock is effective in protecting silkworm against BmIFV also. In the present study the response of 78 silkworm stocks which include 42 of non-diapausing and 36 of diapausing groups, to BmDNV1 is investigated. Newly ecdysed third instar larvae were inoculated per-os with 10% inoculum of BmDNV1 extracted from the mid-gut of infected silkworm. One non-diapausing and three diapausing silkworm stocks were found to be resistant to BmDNV1. Eleven silkworm stocks were found to possess moderate resistance whereas rest sixty three were found to be susceptible to BmDNV1. Genetic analysis has shown that the resistance to BmDNV1 is autosomally inherited and controlled by a major dominant or a major recessive gene in different silkworm stocks. These resistant stocks can be utilized as the resource material to develop BmDNV1 resistant commercial hybrids. The selection strategies, depending upon the mode of inheritance of resistance in the resource material chosen, are discussed.
다공성 중공사막 분리막 기액접촉기을 이용한 황산화물 제거장치를 제작하고 다양한 상용 분리막과 자체 제작한 분리막을 이용하여 황산화물 제거 성능 실험을 수행하였다. 분리막을 이용한 황산화물 제거 성능 평가 결과 대단히 우수한 제거효율을 보였다. 중공사막을 이용하여 $SO_2$를 제거할 경우에 액막 저항을 낮출 수 있는 흡수제와 첨가제의 선정, 막 재질, 막 제조조건 등이 최적의 G-L Contactor개발에 중요한 변수로 나타났다. 향후 보다 소형화되고, 경제적이며 효율이 우수한 G-L Contactor System 개발에 대한 연구를 진행할 것이다.
Recently, research on precise parts required in aerospace, ship, and automobile industries has been actively conducted. In this paper, electron beam drilling machining parameters were selected and experiments were conducted to compare processing characteristics analysis according to machining parameters through machining experiments of a vaporization amplification sheet to which STS 304 was applied. Also, as a result of measuring the machining. As the thickness gradually increased, it was confirmed that the electron beam could not reach the vaporization amplification sheet and thus melted on the surface of the material. As a result of the experimental analysis, it was analyzed that the vaporization explosion reaction of the vaporization amplification sheet was not normally performed due to the working distance (WD) according to the material thickness.
Shot peening is a cold surface treatment employed to induce residual stress field in a metallic component beneficial for increasing its fatigue strength. The experimental investigation of parameters involved in shot peening process is very complex as well as costly. The most attractive alternative is the explicit dynamics finite element (FE) analysis capable of determining the shot peening process parameters subject to the selection of a proper material's constitutive model and numerical technique. In this study, Ansys / LS-Dyna software was used to simulate the impact of steel shots of various sizes on an aluminium alloy plate described with strain rate dependent elasto-plastic material model. The impacts were carried out at various incident velocities. The influence of shot velocity and size on the plastic deformation, compressive residual stress and force-time response were investigated. The results exhibited that increasing the shot velocity and size resulted in an increase in plastic deformation of the aluminium target. However, a little effect of the shot velocity and size was observed on the magnitude of target's subsurface compressive residual stress. The obtained results were close to the published ones, and the numerical models demonstrated the capability of the method to capture the pattern of residual stress and plastic deformation observed experimentally in aluminium alloys. The study can be quite helpful in determining and selecting the optimal shot peening parameters to achieve specific level of plastic deformation and compressive residual stress in the aluminium alloy parts especially compressor blades.
Bioconversion, the enzymatic process by microorganism on organic precursor to desired products. The natural extract is converted into a form that can be easily absorbed into the skin, while scaling up of to higher quantity is possible. Selection of naturally processed raw material rather than chemically processed is preferred. Therefore, fermentation was carried out by mixing Rubus coreanus Miquel, soybean, Zanthoxylum schinifolium as bioconverting materials, the possibility of inflammation, whitening material were checked. In this study, useful microorganisms were isolated from various salted fish, and 16S rDNA sequence was analyzed to confirm their genetic characteristics. Combining the three natural materials using bioconversion technology to study their activity before and after fermentation. To evaluate the antioxidant activity and the active ingredient content the DPPH radical scavenging activity and the total polyphenol content were examined. Raw 264.7 cells were used to evaluate MTT assay, NO and $TNF-{\alpha}$ production inhibitory activity. Also, to evaluate the whitening activity, tyrosinase inhibitory activity and melanin formation inhibitory activity were measured using B16F10 cells. In total 34 strains were obtained from various salted fish. The effective strains useful for the bioconversion process, showed that DPPH radical scavenging ability and polyphenol content were increased in the two kinds of microbial treatment groups compared to the untreated group. 16S rDNA sequencing analysis of the strains showed excellent in Pediococcus pentosaceus B1 in comparison. An increase of up-to 156% in anti-oxidative activity and 141% in polyphenol content was observed after bioconversion. In addition, after mixed fermentation the toxidty of Raw 264.7 and B16F10 cells tended to decrease and a significant increase was observed in anti-inflammatory activity as well. Also, tyrosinase activity and melanin significantly. synthesis decreased significantly.
The purpose of this study is to identify problems and suggest improvements of estimating procedures and item of fisheries supply-demand statistics served as a basis for the fisheries supply-demand policies. Korea Rural Economic Institute(KREI) and Ministry of Oceans and Fisheries(MOF) respectively publish the fisheries supply-demand statistics. But the reliability of data is low as the statistics of these two organizations are limited and show discrepancy in the numbers. It is therefore difficult to use them as the basic data for policies. Also, an accurate data aggregation is difficult due to following problems in the items of statistics. 1) Problems in estimating route sales and non-route sales of production, 2) adequacy of fishery product yield rate compared to raw material in the fisheries import/export sector, 3) selection of target companies for understand stocks and survey scope of fish species, 4) applying'0'to non-edible product demand etc. In order to develop the fisheries industry as a future growth industry, it is necessary to establish the accurate fisheries supply-demand policy as the instability of fisheries supply and demand is increasing. To do this, statistical reliability has to be improved. The improvements proposed in this study should be implemented considering urgency. First of all, an exhaustive analysis of stock statistics and conversion rates of raw material yield in the fisheries import/export sector should be conducted. In the medium term and the long term, transferring production statistics to MOF and surveys on the use demand of non-food product and the level of reduced and discarded seafood products should be carried out in consecutive order.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.