• 제목/요약/키워드: Material Reduction Rate

검색결과 474건 처리시간 0.025초

바이오매스 조연제를 이용한 CO저감형 착화탄 개발에 대한 연구 (A Study on the Development of the Charcoal with Low Carbon Monoxide Emission using Biomass Combustion Improver)

  • 김승희;이연경;이준석;전충환
    • 에너지공학
    • /
    • 제25권3호
    • /
    • pp.9-17
    • /
    • 2016
  • 본 연구에서는 바이오매스 조연제인 리그닌과 글리세린을 이용하여 일산화탄소(CO) 저감형 착화탄을 개발, 연소시 발생하는 일산화탄소 측정을 통해 조연제가 일산화탄소 발생에 미치는 영향을 관찰하였다. 연료의 완전연소를 위해 저온에서 높은 연소성을 보이는 글리세린을 높은 비표면적 값을 가진 리그닌에 함침시켜 연소 특성이 나타날 수 있도록 하였다. 열중량분석기(TGA) 및 가스분석기(GC/MS)를 이용하여 연소성, 탈휘발성 평가 및 일산화탄소 발생량을 측정하였다. 본 연구 결과에서 조연제 함유량에 따른 일산화탄소 발생량을 통해 전체 중량 대비 20% 조연제를 혼합 시 최적의 일산화탄소 저감률을 확인할 수 있었다. 최종적으로 일반 착화탄의 일산화탄소 농도 대비 20~30% 가량 감소한 값을 도출하였다.

Fe-계 산화물 매체의 수소 저장 및 방출을 위한 Cu 및 Ni 첨가제의 효과 (Effects of Cu and Ni Additives for Hydrogen Storage and Release of Fe-based Oxide Mediums)

  • 김홍순;차광서;이동희;유병관;강경수;박주식;김영호
    • 한국수소및신에너지학회논문집
    • /
    • 제19권5호
    • /
    • pp.394-402
    • /
    • 2008
  • The Effects of Cu or Ni additives co-added with Ce/Zr mixed oxides to Fe-based oxide mediums were investigated for the purpose of the replacement of Rh, a precious metal additive, in terms of hydrogen storage(reduction by hydrogen) and release(water splitting). From the results of temperature programmed reduction(TPR), initial reduction rate of iron oxide in the mediums was greatly increased with the addition of Cu, similar to that of Rh. For isothermal redox reaction of 10 cycles, the total amounts of hydrogen evolved in water splitting steps for the mediums added with Cu or Ni were highly maintained at ca. 7 mmol/g-material, even though the oxidation rates were slightly lower than that for the medium added with Rh. This result suggests that the replacement of Rh to Cu or Ni is possible as a co-additive for Fe-based oxide mediums.

Chemical Stability of Conductive Ceramic Anodes in LiCl-Li2O Molten Salt for Electrolytic Reduction in Pyroprocessing

  • Kim, Sung-Wook;Kang, Hyun Woo;Jeon, Min Ku;Lee, Sang-Kwon;Choi, Eun-Young;Park, Wooshin;Hong, Sun-Seok;Oh, Seung-Chul;Hur, Jin-Mok
    • Nuclear Engineering and Technology
    • /
    • 제48권4호
    • /
    • pp.997-1001
    • /
    • 2016
  • Conductive ceramics are being developed to replace current Pt anodes in the electrolytic reduction of spent oxide fuels in pyroprocessing. While several conductive ceramics have shown promising electrochemical properties in small-scale experiments, their long-term stabilities have not yet been investigated. In this study, the chemical stability of conductive $La_{0.33}Sr_{0.67}MnO_3$ in $LiCl-Li_2O$ molten salt at $650^{\circ}C$ was investigated to examine its feasibility as an anode material. Dissolution of Sr at the anode surface led to structural collapse, thereby indicating that the lifetime of the $La_{0.33}Sr_{0.67}MnO_3$ anode is limited. The dissolution rate of Sr is likely to be influenced by the local environment around Sr in the perovskite framework.

니켈-흑연 복합분말의 니켈코팅층에 미치는 코팅 촉매제의 영향

  • 김동진;정헌생;윤기병
    • 한국재료학회지
    • /
    • 제3권5호
    • /
    • pp.521-528
    • /
    • 1993
  • 니켈-흑연 복합분말은 고온 고압하에서 수소개스를 사용하여 ammoniacal황산니켈염 수용액으로 부터 니켈이온을 흑연코어표면에 석출시켜 제조하였으며, SEM. X-선 회절분석, 입도 및 화학분석 등을 이용하여 환원속도 및 니켈코팅층의 특성에 미치는 코팅 촉매제 Anthraquinone$(C_6H_4COC_6H_4 CO)$ 의 영향을 조사하였다. 코팅촉매제의 입도 및 첨가량 변호에 따라 수소개스 주입 후 환원반응이 시작되기 까지 필요한 잠복기는 22~70분 정도 이었으며, 흑연코어 표면의 니켈코팅층은 포도송이 모양(botryoidal)인 미립의 니켈 nodule(2-4$\mu\textrm{m}$)로 형성되었다. 또한 코팅촉매제의 첨가량이 증가함에 따라 코팅용액중 니켈이온의 환원속도는 증가하여 0.2gr/$\ell$첨가시 4.5gr/$\ell$/min를 나타내었다.

  • PDF

적하수은전극을 이용한 미토콘드리아 및 Submitochondrial particles의 호흡활성측정 (Determination of Respiratory Activity of Mitochondria and Submitochondrial Particles by Using Dropping Mercury Electrode)

  • 정진;박상규;이상기;김세호
    • Applied Biological Chemistry
    • /
    • 제28권4호
    • /
    • pp.271-277
    • /
    • 1985
  • 소량의 시료로서 미토콘드리아 및 SMP호흡의 속도론적 연구에 이용할 수 있는 적하수은전극 polarograph를 제작하여 그 성능, 실험조건 및 응용성을 검토하였다. 산소의 제 2단계환원이 일어나는 전위 (약 -1.2 vs SCE)는 막에 결합된 환원성물질의 환원전류로 해석되는 상당한 크기의 잔존전류를 일으키기 때문에 부적절한 것으로 판단되었다. 그러나 산소의 제 1단계환원이 일어나는 -0.4V(vs SCE)하에서는 잔존전류가 관찰되지 않았으며 산소농도의 변화는 정량적으로 추적되었다. 호흡기질의 농도를 충분히 크게 유지하는한 호흡에 의한 용존산소 소모는 O차반응의 처리가 가능하였으며, 그속도 상수와 미토콘드리아 호흡활성간에는 비례관계가 성립되었다. 내냉성이 서로 다른 몇가지 식물조직으로부터 분리한 미토콘드리아의 호흡활성에 미치는 온도효과를 조사하고 호흡활성전이온도를 측정하므로서 제작한 장치의 효용성을 확인하였다.

  • PDF

건조된 재료를 혼합 포장한 콘크리트의 특성에 관한 기초적 연구 -흡수율이 높은 골재 사용 중심으로 - (A Fundamental Study on Properties of Method of Packaged Dry Combined Materials for Concrete -based on using high absorption aggregate-)

  • 한다희;김광기;정상진
    • 한국건축시공학회지
    • /
    • 제7권1호
    • /
    • pp.115-121
    • /
    • 2007
  • Ordinary concrete uses aggregate sufficiently soaked with water, and is weighed, mixed with other materials and placed in accord with performances required in the construction field. Recently special concrete with high fluidity and durability is required but it is difficult to use top-quality concrete due to lack of high-quality aggregate, delayed transportation because of traffic jam, etc. In addition, sometimes the use of a remicon is inevitable just for small-sized concrete constructions or it is difficult for a remicon to reach remote construction places such as mountainous areas. To solve these problems, this study attempted to pack concrete materials. In other words, it is to instantize concrete. This study dried aggregate, a material of concrete, and compared the change of absorption phase of the aggregate in water and in paste in order to examine the effect of the dryness of aggregate on its absorption rate and, based on the absorption rate, decided water addition ratio necessary for the reduction of unit quantity caused by the use of dry aggregate in designing concrete mixture, and analyzed the properties of unhardened concrete according to water addition ratio in manufacturing concrete using aggregate in the state of absolute dryness and in the state of surface dryness.

재생 굵은골재와 제강슬래그 잔골재를 사용한 재생 콘크리트의 특성에 관한 실험적 연구 (Experimental Study on the Properties of Recycled Concrete using Recycled Coarse Aggregates and Steel Slag Fine Aggregates)

  • 이재승;나옥빈
    • 자원리싸이클링
    • /
    • 제24권5호
    • /
    • pp.63-71
    • /
    • 2015
  • 본 연구는 재생 굵은골재와 산업부산물인 급냉 제강슬래그 잔골재를 이용한 친환경 재생 콘크리트의 재료적 특성을 파악하고 적정 혼합비를 도출하는데 그 목적이 있다. 이를 위해서 재생 굵은골재의 치환율은 30%에서 50%까지 증가시켰으며, 급냉 제강슬래그 잔골재는 10%에서 50%까지 증가시켜서 물성실험을 수행하였다. 그 결과, 재생골재의 치환율이 증가함에 따라 강도가 감소하였으나 급냉 제강슬래그 잔골재의 혼입율을 증가함에 따라 강도가 증가됨을 알 수 있었다. 더불어 급냉 제강슬래그 잔골재의 적정 치환율은 압축강도 및 탄성계수 등을 고려했을때 20~30%로 판단되며, 재생 굵은골재의 치환율 증가에도 도움이 될 것으로 사료된다.

인삼 재배 시 토직모 생산에 적합한 유기물 선발 (Selection of Suitable Organic Matter for To-jik Nursery in Panax ginseng C.A. Meyer)

  • 김동원;김희준;박종숙;김대향;정성수;류정
    • 한국약용작물학회지
    • /
    • 제18권2호
    • /
    • pp.74-78
    • /
    • 2010
  • This experiment was carried out to select suitable organic matter in To-jik nursery (self soil nursery) for complement To-jik nursery's defects that are deterioration of raw material by poor quality of seed ginseng and reduction of the quantity in seed ginseng production. Organic matter used were Yacto, rice bean, defatted rice bran, soybean cake and their mixture. As follows, bulk density in soil physical property by treating organic composts was the greatest in soybean cake and the next was followed by mix, Yacto, defatted rice bran, and rice bran treatment in order. Soil pore space ratio was totally the opposite; that was rice bran the first and followed by defatted rice bran, Yacto, mix and soybean cake treatment. The incidence rate of damping off by treating organic composts was 1.5% in both soybean cake and mix while the others was 1.0%. Emergence time was the same among treatment on April 16 and Emergence rate was the highest at 73% in Yacto. There was no significant differences among treatment in the growth of aboveground part but it was a little better in defatted rice bran treatment. In Yacto treatment, the growth of underground part, total root number per kan, rate of first grade ginseng seedling, and rate of usable ginseng seedling etc. were entirely higher but there was little differences. Using defatted rice bran was slightly lower in productivity compared to Yacto, but the possibility was high as a alternative for Yacto in a view of managing cost down.

PVC를 원료로 탄소코팅한 Li4Ti5O12의 합성 및 전기화학적 특성 (Synthesis and Electrochemical Properties of Carbon Coated Li4Ti5O12 using PVC)

  • 현시철;나병기
    • 청정기술
    • /
    • 제24권1호
    • /
    • pp.77-84
    • /
    • 2018
  • 리튬이온전지의 음극활물질로 사용되는 $Li_4Ti_5O_{12}$를 건식 볼밀법으로 합성하였고, $Li_4Ti_5O_{12}$의 전기화학적 특성을 향상시키기 위하여 탄소소재인 polyvinyl chloride (PVC)를 첨가하였다. PVC는 $Li_4Ti_5O_{12}$를 합성하고 난 후에 첨가하였을 때 스피넬 구조를 갖는 물질이 잘 합성되었음을 X-ray diffraction (XRD) 실험으로 확인하였다. 합성하기 전에 탄소재를 첨가하여 열처리를 한 경우에는 탄소재가 미량 첨가되더라도 다른 결정구조의 물질이 합성되는 것을 확인할 수 있었다. 탄소재를 첨가하지 않은 $Li_4Ti_5O_{12}$의 경우 전기전도도 값이 약 $10{\mu}S\;m^{-1}$으로 부도체에 가까운 매우 작은 값을 보였다. 탄소를 첨가함에 따라서 전기전도도가 크게 향상되었으며, 압력을 증가시킬 경우에 최대 10,000배 이상 증가되었다. Electrochemical impedance spectroscopy (EIS) 분석결과 탄소를 첨가할 경우 저항에 해당하는 반원의 크기가 감소하였으며, 이는 전극내의 저항이 감소하였음을 보여준다. Cyclic voltammetry (CV) 분석에 의하면 탄소를 첨가할 경우에 산화피크와 환원피크의 전위차가 줄어 들었으며, 이는 리튬이온의 삽입과 탈리의 속도가 증가하였음을 의미한다. PVC를 9.5 wt% 첨가한 물질의 경우, 0.2 C-rate에서 $180mA\;h\;g^{-1}$, 0.5 C-rate에서 $165mA\;h\;g^{-1}$, 5C-rate에서 $95.8mA\;h\;g^{-1}$의 용량을 나타냄으로써 우수한 출력 특성을 보여주었다.

Ru를 첨가한 음극활물질 Li4Ti5O12의 전기화학적 특성 (Electrochemical Characteristics of Ru Added Li4Ti5O12 as an Anode Material)

  • 조우람;나병기
    • 청정기술
    • /
    • 제20권4호
    • /
    • pp.433-438
    • /
    • 2014
  • 전기자동차와 하이브리드 전기자동차에 요구되는 높은 충 방전 속도, 안전성, 대형화에 적합한 충 방전 전지의 개발은 많은 관심을 받고 있다. 스피넬 구조의 $Li_4Ti_5O_{12}$는 리튬이온이차전지의 음극활물질로 충 방전 시 부피변화가 거의 없기 때문에 수명특성이 뛰어나고, 전해액이 분해되는 전위보다 높은 작동 전압을 갖기 때문에 안정한 장점이 있다. 본 실험에서는 $Li_4Ti_5O_{12}$의 단점인 전기전도성을 향상시키고자 소량의 Ru를 첨가하여 $Li_4Ti_5O_{12}$를 고상법으로 제조하여 테스트하였다. TGA-DTA, XRD, SEM, 충 방전 테스트를 통해 분석을 실시하였다. Ru를 첨가하였을 때 용량은 약간 감소하였지만, 분극현상이 감소하는 것을 확인하였다. 그리고 Ru를 3%와 4% 첨가하였을 때 높은 전류밀도인 10 C-rate 충 방전에서 용량감소율이 줄었다.