• The Korean Journal of Food & Health Convergence
• /
• v.6 no.5
• /
• pp.11-17
• /
• 2020

This study tried to analyze sensual properties by classifying the thermal water extract of the main material used in Ssanghwa tea. Through this study, we wanted to develop popular Ssanghwa tea and further carry out basic research for the development of various menus using it. The ingredients for the Ssanghwa tea were washed under running water, then dehydrated and put in a pot as 2L of purified water. Ssangwha tea were heated at 100℃ for 10 minutes, then lowered the temperature to 75℃ and boiled down to 200 ml for 110 minutes. This study evaluated sensory characteristics of four types of commercial products and the five types manufactured by the description analysis. Quantitative analysis of the commercial Ssanghwa tea showed significant differences between samples in seven of the total 13 sensory characteristics except OG(Smell of grass), OC(Oriental medicine smell), TG(Umami), RT(Thick), RC(Rough) and RS(Tub-Tub) (p<0.05). In particular, differences between samples were evident in CT(Transmittance), CB(Brownness), TW(Sweet taste) and TB(Bitter) (p<0.001), which appeared to be the main differentiated features of appearance, aroma and taste for commercial Ssanghwa tea. This study tried to analyze sensual properties by classifying the thermal water extract of the main material used in Ssanghwa tea. Through, we wanted to develop popular Ssanghwa tea and further carry out basic research for the development of various menus using it.

• Journal of Welding and Joining
• /
• v.26 no.5
• /
• pp.79-89
• /
• 2008

With the increased use of surface textured steel sheet in body-in-white assembly, resistance spot weldability of these steels is considered to be an important subject. This study evaluated nugget formation and weldability by measuring dynamic resistance with various weld pressure, current, and weld time for steel sheet with two different surface roughnesses. The surface roughness for T-H steel ($R_{a}=1.70\;{\mu}m$) was higher than that for T-L steel ($R_{a}=1.33\;{\mu}m$), and resulted in increased contact resistance and heating for T-H steel spot welding. Therefore, at low weld current and weld cycle ranges, the T-H steel showed better weldability over the T-L steel. The evaluations of weld interface showed that the fusion zone in the T-H steel sheet was continuous in contrast to discontinuous fusion zone for T-L steel sheet at the same welding conditions. A comparison of dynamic resistance and tensile-shear strength (TSS) between T-H and T-L steel sheet suggested that high surface roughness provided larger heating at early cycle of welding and larger TSS.

• Journal of Korean Neurosurgical Society
• /
• v.47 no.3
• /
• pp.180-184
• /
• 2010

Objective : To prevent temporal depression after the pterional craniotomy, this study was designed to examine the safety and aesthetic efficacy of the brushite calcium phosphate cement (CPC) in the repair and augmentation of bone defects following the pterional craniotomy. Methods : The brushite CPC was used for the repair of surgically induced cranial defects, with or without augmentation, in 17 cases of pterional approach between March, 2005 and December, 2006. The average follow-up month was 20 with range of 12-36 months. In the first 5 cases, bone defects were repaired with only brushite CPC following the contour of the original bone. In the next 12 cases, bone defects were augmented with the brushite CPC rather than original bone contour. For a stability monitoring of the implanted brushite CPC, post-implantation evaluations including serial X-ray, repeated physical examination for aesthetic efficacy, and three-dimensional computed tomography (3D-CT) were taken 1 year after the implantation. Results : The brushite CPC paste provided precise and easy contouring in restoration of the bony defect site. No adverse effects such as infection or inflammation were noticed during the follow-up periods from all patients. 3D-CT was taken 1 year subsequent to implantation showed good preservation of the brushite CPC restoration material. In the cases of the augmentation group, aesthetic outcomes were superior compared to the simple repair group. Conclusion : The results of this clinical study indicate that the brushite CPC is a biocompatible alloplastic material, which is useful for prevention of temporal depression after pterional craniotomy. Additional study is required to determine the long-term stability and effectiveness of the brushite calcium phosphate cement for the replacement of bone.

• Nuclear Engineering and Technology
• /
• v.53 no.4
• /
• pp.1236-1249
• /
• 2021

Although there are still controversial opinions and uncertainty on application of SiC_f/SiC composite cladding as next-generation cladding material for its great oxidation resistance in high temperature steam environment and other outstanding advantages, it cannot deny that SiC_f/SiC cladding is a potential accident tolerant fuel (ATF) cladding with high research priority and still in the engineering design stage for now. However, considering its disadvantages, such as low irradiated thermal conductivity, ductility that barely not exist, further evaluations of its in-pile behaviors are still necessary. Based on the self-developed code we recently updated, relevant thermohydraulic and mechanical models in FROBA-ATF were applied to simulate the cladding behaviors under normal and accident conditions in this paper. Even through steady-state performance analysis revealed that this kind of cladding material could greatly reduce the oxidation thickness, the thermal performance of UO₂-SiC was poor due to its low inpile thermal conductivity and creep rate. Besides, the risk of failure exists when reactor power decreased. With geometry optimization and dopant addition in pellets, the steady-state performance of UO₂-SiC was enhanced and the failure risk was reduced. The thermal and mechanical performance of the improved UO₂-SiC was further evaluated under Loss of coolant accident (LOCA) and Reactivity Initiated Accident (RIA) conditions. Transient results showed that the optimized ATF had better thermal performance, lower cladding hoop stress, and could provide more coping time under accident conditions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.1-12
• /
• 2023

This paper assesses the suitability of existing standards for plastic material models and performance level evaluation methods in seismic performance evaluations of concrete dam piers during Maximum Credible Earthquakes (MCE). Dynamic plastic analysis was conducted to examine the applicability of the plastic material model under various conditions. As a result reveal that when the minimum reinforcement ratio is not met, the average stress-average strain method recommended in current dam seismic performance evaluation guidelines tends to underestimate pier responses compared to the predicted outcomes of dynamic elastic analysis. Consequently, the paper proposes an improvement plan that treats dam piers with an insufficient minimum reinforcement ratio as unreinforced and integrates fracture energy into concrete tensile behavior characteristics for performance level evaluation. Implementing these improvements can lead to more conservative evaluation outcomes compared to current seismic performance evaluation methods.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.3
• /
• pp.538-545
• /
• 2012

The objective of this work was to study the effect of far infrared ray-vacuum drying having reflection and dispersion functions(RD-FRVD) and hot air drying(HAD) on the quality changes of dried vegetable flakes. HAD was regarded as a control. Browning degrees, color value, titratable acidity and pH value were measured as chemical evaluations. Rehydration and electron micrographs were investigated as physical evaluation. Microbial cells were counted. The color value and browning degrees were increased in both RD-FRVE and HAD. In case of degree of those changes, RD-FRVD made less changes than HAD. Especially, green bean sprout had no differences in color value and browning degrees between raw material and dried-rehydrated material. There were no significance differences in titratable acidity and pH value between raw material and dried-rehydrated material. The total microbial counts were gradually reduced in RD-FRVD. The rehydration rates of dried vegetable flakes were typically increased in RD-FRVD. Also, these results were investigated electron micrographs evaluation. Therefore, these results showed that the quality of dried-rehydrated vegetable flakes was typically enhanced by using RD-FRVD.

• Clean Technology
• /
• v.19 no.4
• /
• pp.388-392
• /
• 2013

Iindium-tin-oxide (ITO) material was had to use in display application as transparent electrode. However it would be problems comes up, the depletion of indium, tin and energy consumption of production process. Therefore recently trend was demanded alternative ITO material and recycling/reused ITO. In this conditions, the environmental impact have to express correct value about recycling/reused ITO process. The life cycle assessment was valuable method in this process. Thus first step was carried out separating in/out put (material) sources and then, exactive data base (DB) was applied. The result of environment impact was calculated by affect categories and recycling rate was set to 34% (This value was measured in previous project). The rate (g) of ITO material was calculated by chemical equivalent. In result, environmental impact were revealed acidification potential and abiotic depletion and if do not recycle/reuse ITO, $ 476 per 1 ton waste in land.

• Journal of Chest Surgery
• /
• v.35 no.9
• /
• pp.659-663
• /
• 2002

The objective of this study was to assess the usefulness of bone scans in routine preoperative examinations of patients with newly diagnosed non-small cell lung carcinoma. Material and Method: We reviewed the medical records of 258 patients who were newly diagnosed with non-small cell lung cancer in our hospital between January 2000 and December 2000. More than half of the patients (132) were deemed to be inoperable due to their advanced stage based on the CT scans. The remaining 126 patients were considered potentially operable. For these patients, clinical evaluation including the presence of bone pain, serum alkaline phosphatase, and calcium levels was used as clinical predictors of bone metastasis. All patients received bone scans. Bone X-rays, MRI or bone biopsy were performed to confirm the presence of bone metastasis. The usefulness of the bone scan was evaluated by comparing its power of predicting bone metastasis to that of the clinical information. Result: In all patients, the positive and negative predictive values of bone scans for the bone metastasis were 44%, and 99%, respectively. Those of the clinical information were 38% , and 94%. However, in potentially operable patients, the negative predictive value of the clinical information was as high as 99%. Conclusion: If newly diagnosed non-small cell lung cancer patients are presented as potentially operable on the basis of CT scan with no clinical evidence of distant metastases, curative resection could be considered without performing routine bone scans because of the low probability of bone metastasis. However, if there are positive clinical findings, further evaluations, including bone scan should be followed as metastasis will be documented in more than 30% of patients.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.1
• /
• pp.41-47
• /
• 2010

Purpose: The purpose of this study was to compare the functional abilities of the low bulb obturators with those of high bulb obturators in terms of patients' evaluation. Material and methods: This study included 11 maxillectomy patients who underwent postoperative prosthodontic rehabilitations. Two obturators of the same design except for different bulb heights, were fabricated for each of the maxillectomy patient. After two months of alternate use, the functions of the obturators were measured by investigating the patients' subjective evaluations in terms of convenience, speech, nasality, leakage, and mastication and identifying their preferred prostheses. Wilcoxon signed rank test was used as a statistical method (P < .05). Results: There were no significant differences in patient evaluations of low and high bulb obturators (P >.05). And patients' preferences varied. Conclusion: In extreme situation such as in mouth opening limitation, the use of low bulb obturators can be recommended and result in comparable speech function to that of obturators with high lateral walls.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.1
• /
• pp.31-42
• /
• 2020

Horse fat is known to be an effective ingredient in Asia, and the horse fat itself, which is mixed with other ingredients at the additive level, is often sold as a finished product. In this case, physical properties of the horse fat raw material are important. Many horse fats produced in Korea (Jeju) have low temperature stability, so if not stored at low temperatures, segregation may occur. In the case of Japanese horse fat, it is partially hydrogenated or is used the solid phase as the horse fat by separating the liquid phase and the solid phase that is harder and more stable than the horse fat of Jeju. In this study, the physical properties were tested to improve the temperature stability even without the partial hydrogenation process of Jeju horse fat. Various oil gelling agents were used in the study. Results confirmed that the physical properties of the hydroxystearic acid added Jeju horse fat were improved. In addition, stability evaluations at temperatures of 25 ℃, 40 ℃, 45 ℃ and flow behavior evaluations at temperatures of 25 ℃, 30 ℃, 40 ℃ were performed for Jeju horse fat with hydroxystearic acid, 100% Jeju horse fat, and 100% Japanese horse fat. Results showed that the Jeju horse fat improved in flow behavior by adding hydroxystearic acid similar to that of Japanese horse fat. In addition, when the crystal state was observed under a microscope, the thermal stability was improved by decreasing the size of the needle-type crystals with the addition of hydroxystearic acid. Jeju horse fat containing hydroxystearic acid was found to have no physical problems even when stored at room temperature for a long time.