• 대한건축학회연합논문집
• /
• 제20권6호
• /
• pp.1-8
• /
• 2018

In generally, the estimation work regarding building mechanical service system in comparison with other architectural estimations is time-consuming, and the process is continuously getting more difficult because of the increased usage of the attached piping materials such as fittings and supports in addition to their complicated construction processes. In order to improve this problem, the Korean authority provides a simple method to estimate the attached material rate regarding the main piping material, which is the most time-consuming work in the architectural mechanical estimation. However, to be an applicable method on construction site, a proper conversion rate of the attached piping material is still required for the proposed method regarding building usage and working types. Therefore, the purpose of this research is the suggestion of the material and labor cost rate of the attached piping materials such as the fittings and supports by work types and fitting methods of indoor fire, sprinkler, and extinguishing gas piping work of mechanical fire protection facilities in office buildings that have been designed after 2010.

• 한국CDE학회논문집
• /
• 제8권2호
• /
• pp.101-108
• /
• 2003

Presented in this paper is the development of an product cost estimation system at the product design stage. The efficient cost estimation function at the design stage is essential for the cost reduction activities through the entire product life cycle. For this purpose, it is necessary to establish a systematic working procedure, and to develop information system for managing a great deal of production and product-related data required for the cost estimation. The developed system has the capability of estimating a cost of assembly type products as well as unit-item type products. As proposed system is based on the variant approach, it can be used easily at an early design stage without the need for detail design information. Also, this system is integrated with legacy PDM (Product Data Management) and ERP (Enterprise Resource Planning) system for fast. accurate and easy product cost estimation. The estimated cost includes material cost, overhead cost as well as labor cost.

• 한국전기전자재료학회논문지
• /
• 제35권5호
• /
• pp.471-479
• /
• 2022

Recently, piezoelectric devices, such as ultrasonic surgery, ultrasonic atomizer, and ultrasonic speaker, are analyzed and designed by finite element simulation methods. However, the discrepancy between the design and the experiment results of the device typically occurs due to the inaccuracy of the piezoelectric material properties. To improve the simulation accuracy, the material properties of the PZT ceramics were better refined using parameter estimation method. The material parameters are elastic stiffness c^E_ij and piezoelectric constant e_ij of PZT ceramics. The impedance curve characteristics for the LTE mode of PZT ceramics were calculated. The mismatch between the simulation and the experimental data were compared and minimized by a least square method. Finally, the simulated impedance data were compared with the experimental data for the various vibration modes of PZT ceramics and the optimized material properties of PZT ceramics were verified. To further verify the accuracy, this method was also applied to piezoelectric PMN-PT single crystals.

• 한국지반환경공학회 논문집
• /
• 제15권3호
• /
• pp.21-32
• /
• 2014

본 연구에서는 매개변수 추정을 통하여 기존 배관 유동에 사용되는 유속 및 마찰계수 산정식을 대신할 수 있는 추정방법을 제안하고, 이를 실험을 통하여 증명하였다. 기존 유동에 관한 운동방정식이 반영하는 파라미터가 유체 유동에 초점이 맞춰져서 실제 현장 적용 시 매개변수의 불확실성과 재료 불확도 등의 지배를 받게 되어 정확한 유동특성을 반영하기 어려운 반면에 이를 극복하기 위하여, 본 연구에서는 유동방정식의 시스템 모델링 기법을 통해 입출력 관계를 통한 유동특성 매개 변수를 산정하여 마찰계수를 추정할 수 있도록 하였다.

• 한국음향학회지
• /
• 제42권5호
• /
• pp.377-387
• /
• 2023

본 논문에서는 1-3형 압전복합재료를 단일상의 균질 압전매질로 모델링하기 위해 필요한 등가의 물성을 유한요소 해석으로 직접 추출하는 기법의 정확도를 다룬다. 직접 추출 기법은 압전재료의 전기적, 기계적 거동과 상호 간 커플링을 기술하는 구성방정식을 기반으로 물성 행렬의 개별 성분들을 직접적으로 산출하는 방법이다. 직접 추출에 사용되는 두 가지 구성방정식 조합 간의 정확도를 비교하기 위하여 단일 1-3형 압전복합재료 하이드로폰을 대상으로 등가물성과 수신감도를 산출하고 전체 영역에 대한 유한요소 해석 결과와 비교한다. 물성 추출의 정확도는 압전복합재료를 구성하는 폴리머의 탄성 특성과 밀접한 관련이 있음을 확인하고, 오차 원인을 분석하여 정확한 등가물성 산출을 위한 가이드라인을 제시한다. 압전복합재료 하이드로폰과 주변의 음향구조물을 포함하는 스테이브 규모에 대해서도 등가 모델링을 적용하여 추출된 물성의 정확도와 연산량 감소를 확인한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.2129_2131
• /
• 2009

Since Jan. 2004, the Ministry of Construction and Transportation has partly introduced estimation system of historical cost data in order to reflect result cost of construction market to cost estimation for public construction. It is expected that the purpose of the introduction would be evaluated considering the long-term development of domestic construction industry. In article 3, paragraph 4 of the planning criteria of estimated cost of financial regulation related to government contract rule, the profit estimated by historical cost data indicates sales profit and it is calculated by multiplying the sum of direct cost, indirect cost and general overhead by rate of profit. Finally, it is said that rate of profit cannot exceeds 10%. However, there are a lot of constructions for electronic equipment in the electronic construction and the proportion of government furnished material is very high, not like engineering works or constructions. Therefore, as the proportion of material cost over direct cost is relatively lower, if current rate of profit (10%) is applied, there would be a wide difference of cost in the items of profit under the estimation system of historical cost data. This paper was conducted to examine estimation methods of the items of profit under the estimation system of historical cost data and suggest reasonable applications.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.155-159
• /
• 2007

Since Jan. 2004, the Ministry of Construction and Transportation has partly introduced estimation system of historical cost data in order to reflect result cost of construction market to cost estimation for public construction. It is expected that the purpose of the introduction would be evaluated considering the long-term development of domestic construction industry. In article 3, paragraph 4 of the planning criteria of estimated cost of financial regulation related to government contract rule, the profit estimated by historical cost data indicates sales profit and it is calculated by multiplying the sum of direct cost, indirect cost and general overhead by rate of profit. Finally, it is said that rate of profit cannot exceeds 10%. However, there are a lot of constructions for electronic equipment in the electronic construction and the proportion of government furnished material is very high, not like engineering works or constructions. Therefore, as the proportion of material cost over direct cost is relatively lower if current rate of exceeds (10%) is applied, there would be a wide difference of cost in the items of profit under the estimation system of historical cost data. This paper was conducted to examine estimation methods of the items of profit under the estimation system of historical cost data and suggest reasonable applications.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.253-254
• /
• 2007

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.135-138
• /
• 2007

A novel technique to estimate the dielectric constant of ground material by means of air launching GPR is proposed. The technique is an application of SAR algorithm. A laboratory experiment was conducted to examine the technique.

• 대한산업공학회지
• /
• 제33권2호
• /
• pp.166-173
• /
• 2007

In this paper, we propose a model-based approach to estimating production parameters of semiconductor FAB equipment. For FAB scheduling, for example, we need to know equipment's production parameters such as flow time, tact time, setup time, and down time. However, these data are not available, and they have to be estimated from material move data such as loading times and unloading times that are automatically collected in modern automated semiconductor FAB. The proposed estimation method may be regarded as a Bayes estimation method because we use additional information about the production parameters. Namely, it is assumed that the technical ranges of production parameters are known. The proposed estimation method has been applied to a LCD FAB, and found to be valid and useful.