• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.857-860
• /
• 1997

The purpose of this research was to study the influence of machining characteristics for aluminum alloys. The effect of metallic microstructural variables on the measures of machinability of aluminum alloys has no been adequately investigated. Machining Characteristics are influenced significantly by mechanical characteristics, composition and structure of material etcs. For improvement of machining characteristics, various studies are reported. In this paper, composition elements add to aluminum alloys within the limit of sustaining mechanical characteristics of metallic material. We have analyzed dynamic characteristics of cutting resistance, tensile strength value, hardness value etcs.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.1075-1080
• /
• 2006

Purpose of this study is proposal of estimating method about window thermal performance that based on KS F 2278 'Test method of thermal resistance for windows and doors' due to material composition of PVC frame window. First step of this study is research of present state about material composition of PVC frame window. Second is selection of main effective elements about window thermal resistance. For example, composition of Glazing, Frame area ratio of total window area, frame width, opening type, area of heat transfer and so on. Third is multiple regression analysis about thermal performance of PVC frame window due to main effective elements. It produces equations of multiple regression analysis due to opening type. Case of sliding window is $Y=0.149+0.034X_g+0.248X_{far}$, 4track sliding is $Y=0.584+0.175X_g+1.355X_{far}-0.008X_{fw}$, Tilt & Turn window is $Y=-0.161+0.076X_g+0.576X_{far}+0.0008X_{fw}$.

• 한국전기전자재료학회논문지
• /
• 제17권3호
• /
• pp.353-359
• /
• 2004

In this study. porcelain insulator samples which have a different alumina composition were manufactured in order to test electrical and mechanical properties and make an analysis of the propagation phenomena of micro cracks on porcelain body. From XRD quantitative analysis the crystalline phases were different with alumina composition, sample C and D which have about l7wt％ Corundum phase without the Cristobalite phase shows better electrical and mechanical properties than sample A and B which have the Cristobalite phase. In dielectrics test on porcelain samples with below l7wt％ alumina composition, it was found that the amount of glass phase(SiO$_2$) have an main effect to decrease the dielectric loss(tan$\delta$), and the dielectric breakdown voltage of aluminous porcelain insulators was largely affected by its relative density. As a micro tracks analysis, HRB were measured, then the intensity of HRB increased with the amount of alumina composition. On the other hand, the propagation behaviors of cracks was fairly influenced by the distribution of pores.

• 대한기계학회논문집A
• /
• 제29권8호
• /
• pp.1132-1138
• /
• 2005

Fatigue life of metal material can be predicted by the use of fracture theory and experimental database. Although prediction of fatigue life of rubber material uses the same way as metal, there are many reasons to make it almost impossible. One of the reasons is that there is not currently used fracture criteria for rubber material beacuse of non-standardization, various way of composition process of rubber and so on. Tearing energy is one of the fracture criteria which can be applied to a rubber. Even if tearing energy relaxes the restriction of rubber composition, it is also not currently used because of complication to apply in. Research material about failure process of rubber and tearing energy was reviewed to define the process of fatigue failure and the applicability of tearing energy in estimation of fatigue life for rubber. Also, 1file element formulation of tearing energy which can be used in FE analysis was developed.

• Steel and Composite Structures
• /
• 제37권2호
• /
• pp.137-150
• /
• 2020

In this research work, the analytical rotating vibration for functionally graded shell with ring supports are restricted to some volume fraction laws based on Rayleigh-Ritz technique. The frequencies of functionally grade cylindrical shells have been investigated for the distribution of material composition of material with two kinds of material. Stability of a cylindrical shell depends highly on these aspects of material with ring supports. The frequency behavior is investigated with fraction laws versus circumferential wave number, length-to-radius and height-to-radius ratios. The frequencies are higher for higher values of circumferential wave number. The frequency first increases and gain maximum value with the increase of circumferential wave mode. Moreover, the effect of angular speed is also investigated. It is examined that the backward and forward frequencies increases and decreases on increasing the ratio of height- and length-to-radius ratios.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.223-224
• /
• 2017

In this study, various materials such as epoxy material, urethane material, cement material, and acrylic material are used to solve the water leakage occurring in underground structures. However, in the reality that the durability is insufficient and the effect is insufficient, it is aimed to improve the repairing effect by using cement and acrylics in combination. As a first study, we tried to verify the performance of improve the performance by checking the product properties according to the composition ratio of polyacrylic resin. Polyacrylic resin is evaluated in three different composition ratios. When the material is selected for polyacrylic resin, it is applied to the field to understand the maintenance effect and durability.

• 한국축산식품학회지
• /
• 제31권2호
• /
• pp.215-223
• /
• 2011

Surimi-like samples were divided into four groups (C, surimi-like material made from Alaska Pollack with all cryoprotectant ingredients; T1, surimi-like material made from chicken breast with sugar and a sorbitol-free cryoprotectant; T2, surimi-like material made from chicken breast with a sugar-free cryoprotectant; T3, surimi-like material made from chicken breast with all cryoprotectant ingredients). Water and protein content were lower in Alaska Pollack surimi-like material (C) than those in chicken breast surimi-like material. Centrifuge loss and cooking loss were higher in C than those in chicken breast surimi-like material. Lipid oxidation (thiobarbituric acid reactive substances) was lower in T3 than others during storage. In a sensory evaluation, overall acceptability was significantly higher in C than those in other samples during storage. As a result, we found that the raw material composition (Alaska Pollack or chicken breast) had a large influence on the physico-chemical characteristics and quality of surimi-like materials, whereas cryoprotectant composition may have less influence on the physico-chemical characteristics and quality of surimi-like materials.

• Journal of the Korean Wood Science and Technology
• /
• 제38권6호
• /
• pp.480-489
• /
• 2010

국내 시판용 전통 목탄의 과학적인 성질 규명과 주요 기능성 분석과 이용 방안에 대한 분석을 실시하였다. 국내에서 구입 가능한 시판용 목탄의 범위 내에서 해부학적 특성, 원소 조성, 무기성분 조성, 발열량, 음이온 및 원적외선 방사량, 조습성 등의 분석을 통하여 기능성 재료로 이용 가능성에 대하여 판단하고자 하였다. 원소조성, 무기물 조성, 음이온 및 원적외선 방사량은 목탄 제조 방법과 제조회사에 따라서 큰 변이를 보였다. 특히 조습성은 흑탄의 경우 백탄이나 기계숯 보다 열등한 성능을 나타내었다. 전통숯을 기능성 재료로 사용하기 위해서는 해부학적 특성, 원소 조성, 무기물 조성, 발열량, 음이온 및 원적외선 방사량, 조습성을 분석하여 선택적 이용이 필요 할 것으로 생각한다. 또한 차후 원하는 기능에 맞는 목탄 제조 방법 기술의 개발이 필요할 것으로 생각한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.283-283
• /
• 2009

Composition environments - Automatic Control System based on Sproute Cultivator using Remote Conditional Driving System was realized. It was carried out to investigate into the characteristics of LEDs Control for the cultivation of sprouts. We have also composed a Combined Automatic Control System possible for the control of temperature and humidity at the same time. The applied LEDs for measurement are blue, green, red, white, yellow leds. And we had also designed the Web Programming for the automatic control about sprout cutivators.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.202-206
• /
• 2001

The purpose of this research was to study the influence of machining characteristics for aluminum alloys. The effect of metallic microstructural variables on the measures of machinability of aluminum alloys has no been adequately investigated. Machining Characteristics are influenced significantly by mechanical characteristics, composition and structure of material etcs. For improvement of machining characteristics, various studies are reported. In this paper, composition elements add to aluminum alloys within the limit of sustaining mechanical characteristics of metallic material. We have analyzed dynamic characteristics of cutting resistance, tensile strength value, hardness value etcs.