• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.399-402
• /
• 2002

This paper is researched that electric characteristic of Digital x-ray radiography technique with changing composition ratio of Iodine. Dopant material, Iodine is evaporated with amorphous selenium. Thorugh the old papers say, doponted Iodine will be down the created trap level because of Arsenic dopant material in amorphous selenium. Arsenic material of Composition ratio in amorphous selenium is fixed with 0.3% and test sample is deposited composition of 30, 100, 300, 500, 700ppm with thermal evaporate system. Experimental measurement is performed by dark current and x-ray sensitivity in amorphous selenium based radition detector sensor. Fabricated test sample thickness is $30{\mu}m$ and injected voltage is $3{\mu}m$，$6{\mu}m$，$9{\mu}m$ to both electrode. Experimental results showed that the net charge of composition rate of 30ppm is 398.88 pc/mR/$cm^2$ very high. And increase of the Iodine composition ratio is tendency to the decrease of net charge. Doping changing composition of Iodine in amorphous selenium detector offered to basical information of amorphous selenium material.

• 한국CDE학회논문집
• /
• 제11권4호
• /
• pp.235-245
• /
• 2006

This paper proposes a CSG-based representation scheme for heterogeneous objects including multi-material objects and Functionally Graded Materials (FGMs). In particular, this scheme focuses on the construction of complicated heterogeneous objects guaranteeing desired material continuities at all the interfaces. In order to create various types of heterogeneous primitives, we first describe methods for specifying material composition functions such as geometry-independent, geometry-dependent functions. Constructive Material Composition (CMC) and corresponding heterogeneous Boolean Operators (e.g. material union, difference, intersection. and partition) are then proposed to illustrate how material continuities are dealt with. Finally, we describe the model hierarchy and data structure for computer representation. Even though the proposed scheme alone is sufficient for modeling all sorts of heterogeneous objects, the proposed scheme adopts a hybrid representation between CSG and decomposition. That is because hybrid representation can avoid the unnecessary growth of binary trees.

• 한국전기전자재료학회논문지
• /
• 제15권5호
• /
• pp.455-459
• /
• 2002

I have investigated the effects of annealing on a polymeric $\alpha-C_3N_{4.2}$ at high pressure and temperature in the presence of seeds of crystalline carbon nitride films prepared by a high voltage discharge plasma. The samples were evaluated by x-ray photoelectron spectroscopy (XPS), infrared spectroscopy, Auger electron spectroscopy and x-ray diffraction(XRD). Notably, XPS studies of the film composition before and after annealing demonstrate that the nitrogen composition in $\alpha-C_3N_{4.2}$ material initially containing more than 58% nitrogen decreases during the annealing process and reaches a common, stable composition of ~43%. XPS analysis also shows that the nitrogen composition in the annealed films without polymeric $\alpha-C_3N_{4.2}$ was reduced from 35% to 17%. Furthermore the concentration of the sp$^3$bonded phase increased with the increment of the annealing temperature.

• 한국전기전자재료학회논문지
• /
• 제19권9호
• /
• pp.832-837
• /
• 2006

Antennas were fabricated by physical(adhesive) and chemical(deposition+plating) method on organic-inorganic composite material. And antennas were measured dielectric constant and gain. Dielectric constant of antennas were fabricated by physical method was decreased with increase of adhesive tape thickness and number of conduction material composition. But antennas were fabricated by chemical method was reached to 90 % of dielectric material. Gain of antennas were fabricated by physical method was decreased with increase of adhesive tape thickness. But they were unrelated with conduction material composition. The other side antennas were fabricated by chemical method excelled more 0.8 dBic than antennas were fabricated by physical method in gain of antenna. Finally, chemical method can expect excellent product process because it can produce smaller size, higher gain and elimination of many handworks.

• Nuclear Engineering and Technology
• /
• 제50권7호
• /
• pp.1120-1130
• /
• 2018

An analysis of a pyroprocessing safeguards methodology employing the Pu-to-$^{244}Cm$ ratio is presented. The analysis includes characterization of representative used nuclear fuel assemblies with respect to computed nuclide composition. The nuclide composition data computationally generated is appropriately reformatted to correspond with the material conditions after each step in the head-end stage of pyroprocessing. Uncertainty in the Pu-to-$^{244}Cm$ ratio is evaluated using the Geary-Hinkley transformation method. This is because the Pu-to-$^{244}Cm$ ratio is a Cauchy distribution since it is the ratio of two normally distributed random variables. The calculated uncertainty of the Pu-to-$^{244}Cm$ ratio is propagated through the mass flow stream in the pyroprocessing steps. Finally, the probability of Type-I error for the plutonium Material Unaccounted For (MUF) is evaluated by the hypothesis testing method as a function of the sizes of powder particles and granules, which are dominant parameters to determine the sample size. The results show the probability of Type-I error is occasionally greater than 5%. However, increasing granule sample sizes could surmount the weakness of material accounting because of the non-uniformity of nuclide composition.

• 한국지반신소재학회논문집
• /
• 제22권4호
• /
• pp.35-42
• /
• 2023

본 연구에서는 유기오염물의 흡수가 가능한 차수재의 반응재료에 대하여 지중 매입 재료로서의 적용성을 평가하기 위해 오염물의 접촉에 의한 강도 특성 변화를 평가하였으며, 강도 평가는 일축압축시험 결과를 이용하였다. 시험 결과, 오염물 종류에 따른 반응재료의 강도는 물 > TCE > TPH의 순서로 확인되었다. 그러나 폴리노보넨의 구성비가 12% 이하에서는 TPH의 강도가 TCE에 비하여 크게 나타났다. 물로 접촉된 반응재료는 폴리노보넨의 구성비가 작을수록 강도가 지속적으로 감소하였지만, TCE 및 TPH와 접촉된 반응재료의 강도는 폴리노보넨의 구성비가 30%에서 21%까지 작아질수록 증가하다가 이후에는 감소하였다. 즉, 지중에서 발생되는 응력 조건에 따라 오염물의 접촉에 의한 강도를 고려하여 반응재료의 최적 구성비가 적용되어야 한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1989년도 춘계학술대회 논문집
• /
• pp.83-86
• /
• 1989

Lead titanate thin films with a perovskite structure were successfully structure were successfully fabricated on titanium substrate by Chemical Vapour Deposition(CVD). Analyses of Auger Electron Spectroscopy(AES) and X-ray Photoelectron Spectroscopy (XPS) have been performed in order to find a chemical composition of lead titanate films. The analysis of chemical composition by AES and XPS was investigated for variations of deposition temperature and Ti(C$_2$H$_{5}$O)$_4$ fractions. The chemical composition of PbTiO$_3$by XPS analysis was almost constant regardless of deposition parameters and the comparison of chemical composition by AES and XPS was performed.d.

• 한국재료학회지
• /
• 제1권2호
• /
• pp.105-112
• /
• 1991

압전 actuator를 위한 새로운 형태의 재료를 개발하여, 그 특성들을 조사하였다. 이 압전 actuator는 세 층으로 구성되어 있다: 압전 세라믹 층, 조성이 점차로 변하는 중간층, 그리고 또 다른 압전 세라믹 층, 이러한 형태이 재료는 경사 기능 재료(Functionally Gradient Material, FGM)라 불리운다. 경사 기능 재료를 제작하기 위한 재료설계의 개념을 도입하여, FGM화에 있어서 열팽창에 의한 시편의 박리를 막기 위해 $(Pb,\;La)(Zr,\;Ti)O_3$계에서 서로 다른 세라믹스의 조성을 선택하였다. $1300^{\circ}C$, 2시간의 소성에 의해 경사 기능화된 PLZT는 약 $20\mu\textrm{m}$정도의 중간층을 형성하는 미세구조를 가지고 있었다. 경사 기능 재료에서의 유전 및 압전 등의 여러 특성은 두 접합 조성층 특성의 사이의 값을 나타내었다. 인가 전압에 따른 strain특성은 전반적으로 단일 시편의 특성보다 증가하였으며, 특히 접합 조성층에서 고압전-저유전성 조성과 저압전-고유전성 조성을 경사 기능화하였을 경우에 변위의 증가 정도가 더욱 향상되었다.

• 한국전기전자재료학회논문지
• /
• 제19권10호
• /
• pp.918-922
• /
• 2006

Chalcogenide Phase change memory has the high performance necessary for next-generation memory, because it is a nonvolatile memory with high programming speed, low programming voltage, high sensing margin, low power consumption and long cycle duration. To minimize the power consumption and the program voltage, the new composition material which shows the better phase-change properties than conventional $Ge_2Sb_2Te_5$ device has to be needed by accurate material engineering. In the present work, we investigate the basic thermal and the electrical properties due to phase-change compared with chalcogenide-based new composition $Ge_1Se_1Te_2$ material thin film and convetional $Ge_2Sb_2Te_5$ PRAM thin film. The fabricated new composition $Ge_1Se_1Te_2$ thin film exhibited a successful switching between an amorphous and a crystalline phase by applying a 950 ns -6.2 V set pulse and a 90 ns -8.2 V reset pulse. It is expected that the new composition $Ge_1Se_1Te_2$ material thin film device will be possible to applicable to overcome the Set/Reset problem for the nonvolatile memory device element of PRAM instead of conventional $Ge_2Sb_2Te_5$ device.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.492-496
• /
• 2001

Due to their better photosensitivity in X-ray, the amorphous selenium based photoreceptor is widely used on the X-ray conversion materials. It was possible to control the charge carrier transport of amorphous selenium by suitably alloying a-Se with other elements(e,g. As, Cl). In this paper, We investigated dopants(As, Cl) composition rate to improve dark resistivity and transport properties of charge carrier in amorphous selenium using by direct X-ray conversion material. Alloying a-Se with As inhibits the recrystallization of a-Se but introduces undesirable deep hole traps. then doping with Cl(in the ppm range) compensates for the deep hole traps. We investigated their composition rate in various doping conditions and then obtained optimum dopant composition rate. The result was Se-As 0.3%-Cl 30 ppm and X-ray Sensitivity was 0.57 pc/pixel$.$mR at 137 $\mu\textrm{m}$ x 137 $\mu\textrm{m}$ Pixel area.