• 한국전자파학회논문지
• /
• 제24권10호
• /
• pp.964-970
• /
• 2013

본 논문은 적층된 칩 사이의 3차원 대역 통과 무선 통신 인터페이스를 제안한다. 제안 방법은 적층된 칩 사이의 작은 커패시턴스를 포함한 3차원 공진기를 이용하여 자주 주파수 발진기(free running oscillator)를 구성하고, 이 발진기를 진폭 변조하여 추가적인 정합회로 없이 수신단에서 포락선 검파를 통해 신호를 검출한다. 제안 방법을 검증하기 위해 110 nm CMOS 공정을 사용하여 송수신 칩을 설계하고, 제작하여 50 ${\mu}m$ 두께의 칩 사이에 2 Gb/s의 데이터 전송 속도를 확인하였다. 제작한 칩은 동작전압 1.2 V를 사용하며, 송수신 칩을 합하여 4.32 mW의 전력을 소모한다. 칩의 크기는 송신단은 0.045 $mm^2$이고, 수신단은 0.029 $mm^2$이다.

• 전기전자학회논문지
• /
• 제24권1호
• /
• pp.368-371
• /
• 2020

본 논문에서는 휴대용 UHF대역 RFID 시스템을 위한 선형 테이퍼드 슬롯 정류 안테나를 제안하였다. 제안한 정류 안테나는 별도의 유전체 기판을 사용하지 않기 때문에, 얇은 금속 두께로 평판형 안테나를 구현하였다. 정류 안테나는 입력 RF전력을 출력 DC전압으로 전환하는 정류회로는 2개의 쇼트기 다이오드를 이용한 배전압회로를 이용하였으며, 선형 테이퍼드 슬롯 안테나에 집적하여 정류 안테나를 설계하였다. 배전압 정류회로와 선형 테이퍼드 슬롯 안테나의 임피던스 공액정합을 위하여, 테이퍼드 슬롯의 각도와 안테나 급전선의 길이의 조절을 통해 source-pull 방법을 이용하였다. 제안한 안테나 시제품은 자유공간 무선환경실험 환경에서 RF-DC전환 실험과 원거리장 안테나 방사패턴 측정실험을 통해 회로 및 방사 특성을 검증하였다. 최종 제안한 안테나는 중심주파수 915 MHz 기준으로 0.23-파장(75 mm)와 0.18-파장(60 mm) 크기로 소형화하였다.

• 한국정보통신학회논문지
• /
• 제13권12호
• /
• pp.2662-2670
• /
• 2009

반사기 형태에 따른 경사진 빗살무늬 변환기 SAW 필터 특성을 비교하기 위해 모의실험을 통해 Langasite 기판위에 전극을 형성시켰으며, 전극재료로는 Al-Cu를 사용하였다. 모의실험을 바탕으로 입력단에는 IDT를 직렬형태로 연결시킨 block 형태로 하중을 가하는 전극 방법을 쓰고 출력단은 withdrawal 형태로 하중을 가하는 방법을 써서 제작하였다. 이를 바탕으로 광대역의 SAW 필터 전극 설계 방식에 대한 적절한 위상조건도 얻고자 시도하였다. Langasite 기판위에 형성시킨 입 출력빗살무늬 변환기 전극수는 50쌍, 두께는$5000{\AA}$으로 하였으며, 반사기 폭과 간격은 각각 $3.6{\mu}m$ 및 $2.0{\mu}m$으로 하였다. 제작한필터의 주파수 특성은 중심주파수가 대략 190MHz정도, 대역폭은 8.0MHz 정도로 측정되었으며, matching 후 return-loss는 -16dB 이하이고, 리플 특성은 4dB 정도이며, 반사에 의한 잔향은 -20dB 이하로 측정되었다.

• 센서학회지
• /
• 제25권1호
• /
• pp.46-50
• /
• 2016

During KSTAR plasma experiments, torsional $Alfv\acute{e}n$ waves in the frequency of few GHz or below were detected. To understand this plasma waves during the crash of MHD instabilities, an RF spectrometer has been developed for detection of the radiated RF signals in the KSTAR Tokamak. It has the capability of broadband RF spectral measurement (50 ~ 400 MHz). To detect the broadband RF signals which are radiated from the KSTAR systems, a broadband antenna is the key feature of the RF spectrometer. In this paper, a broadband bowtie antenna for detection of $Alfv\acute{e}n$-waves in the KSTAR Tokamak is presented. Planar-type bowtie antenna is designed and fabricated on an FR4 substrate with thickness of 1.6 mm. The antenna consists of bowtie shaped balanced radiators and broadband planar balun. The antenna is designed to have an input impedance of 50 Ohm, and a taper-shaped balun is adopted for field and impedance matching between 50 Ohm transmission line to 110 Ohm feeding network of balanced radiators. The implemented antenna provides around -3 to 3 dBi of gain for the whole frequency band. The VSWR of the bowtie antenna is less than 12:1 over the frequency bandwidth of 50 to 2000 MHz.

• Archives of Plastic Surgery
• /
• 제38권4호
• /
• pp.451-457
• /
• 2011

Purpose: As a central feature of the face, the nose has considerable significance in appearance and expression. Reconstruction of full thickness defects of the nasal ala has always been a challenge because of the 3-dimensional structure. For reconstruction of post burn defects of ala, skin graft, local or pedicled flap and composite graft are optionally available. We have reconstructed the ala defects using adiposocutaneous graft and observed the outcome. Methods: From March 2003 to December 2010, 19 cases in 11 patients with scar contracture and defect on ala portion were performed operation using adiposocutaneous graft. As a donor site, we used the inguinal crease and posterior auricular area and the donor site was primarily closed. We made incision through the superior rim of ala and released fully. A graft is applied to recipient site with larger size than recipient volume. Results: The mean age of the patient was 38.6 years (16~51), males are seven patients and females are four patients. The operation was performed bilaterally in 5 patients and unilaterally in 6 patients. Composite grafts were harvested from inguinal area in 13 cases and posterior auricular area in 6 cases. In one case, we did 4 times of operation to get enough volume. All the grafts were well taken. The mean size of the graft was 3.63 $cm^2$. Conclusion: For reconstruction of post burn defects of ala, it's not easy to use local flap or pedicled flap because of hardness and fibrosis of surrounding tissue. So, we choose adiposocutaneous graft for ala deformity reconstruction, got satisfactory outcome in color matching and texture.

• 한국정보통신학회논문지
• /
• 제11권12호
• /
• pp.2374-2381
• /
• 2007

표면 탄성파 필터 적절한 임피던스 정합 조건도 얻고자 단상 단방향성 및 양방향성 변환기형 필터를 제작하였다. 그리고 경사진 빗살무의 변환기 형태인 표면 탄성파 필터 제작하기 위하여 Langasite 기판위에 빗살무의 전극들을 형성시켜 모의실험을 수행하였으며, 전극재료로는 Al-Cu를 사용하였다. Langasite 기판위에 형성시킨 단상 단방향성 필터의 전극 수는 50쌍, 두께는 $5000{\AA}$으로 하였으며, 반사기 폭은 $3.6{\mu}m$이고 전극 폭과 전극과 반사기 사이의 간격은 각각 $1.2{\mu}m$로 하였다. 양방향성 필터에서는 전극 폭과 간격은 각각 $1.8{\mu}m$로 하였다. 제작한 필터의 임피던스 정합 후 주파수 특성에서 중심 주파수는 190MHz, 대역폭은 5.3MHz정도로 측정되었으며, 리플 특성은 0.3dB 이하이고, -20dB 정도의 삽입 손실이 측정되었다.

• Current Optics and Photonics
• /
• 제2권2호
• /
• pp.125-133
• /
• 2018

We report an in-depth analysis of the design and fabrication of multilayer dielectric (MLD) diffraction gratings for spectral beam combining at a wavelength of 1055 nm. The design involves a near-Littrow grating and a modal analysis for high diffraction efficiency. A range of wavelengths, grating periods, and angles of incidence were examined for the near-Littrow grating, for the $0^{th}$ and $-1^{st}$ diffraction orders only. A modal method was then used to investigate the effect of the duty cycle on the effective indices of the grating modes, and the depth of the grating was determined for only the $-1^{st}$-order diffraction. The design parameters of the grating and the matching layer thickness between grating and MLD reflector were refined for high diffraction efficiency, using the finite-difference time-domain (FDTD) method. A high reflector was deposited by electron-beam evaporation, and a grating structure was fabricated by photolithography and reactive-ion etching. The diffraction efficiency and laser-induced damage threshold of the fabricated MLD diffraction gratings were measured, and the diffraction efficiency was compared with the design's value.

• Nano
• /
• 제13권11호
• /
• pp.1850125.1-1850125.12
• /
• 2018

To reduce the imbalance of impedance matching between the magnetic metal nanowires and free space, $Fe/TiO_2$ core/shell nanowire arrays with different diameters were fabricated in the templates of anodic aluminum oxide membranes by electrodeposition. The influences of the microstructure on the microwave absorption properties of the $Fe/TiO_2/Al_2O_3$ composites were studied by the transmission/reflection waveguide method. It was demonstrated experimentally that both the interfacial polarization and the diameter of the $Fe/TiO_2$ core/shell nanowires have critical effects on the microwave absorption properties. We also investigated the angle dependence of the microwave absorption properties. Due to the interfacial polarization and associated relaxation, the $Fe/TiO_2/Al_2O_3$ composites exhibited optimal microwave absorption properties when microwave propagation direction was accordant with the axis of the nanowires. Finally, we managed to obtain an optimal reflection loss of below -10 dB (90% absorption) over 10.2-14.8 GHz, with a thickness of 3.0 mm and the minimum value of -39.4 dB at 11.7 GHz.

• 품질경영학회지
• /
• 제47권2호
• /
• pp.345-365
• /
• 2019

Purpose: We consider export of Korea for Muslim population of Cairo residents in Egypt. Product instant cup noodle and yuzu tea are mainly focused on Kano model and Timko's customer satisfaction factor (CS - Coefficient) analysis and conjoint analysis. Methods: Based on the evaluation and conjoint analysis, cluster analysis was additionally applied to further exploratory research as to what kind of population the target customer has. A total of 120 people, each 60 people each, were prosecuted for Muslim women, middle middle class who had over 3,000 Korean won annual income for that study, and in Cairo in August 18. Results: The Kano analysis result Instant cup noodles act as attractive elements for packaging state, cooking method, smell and convenience, and Yuzu tea acted as an attractive element of taste, eating method, raw materials, efficacy, packaging form. Customer satisfaction factor, instant cup noodles, capacity and noodle thickness was a factor of indifference in Kano analysis, but acted as an attractive factor, the way to eat citron tea was classified as a factor of indifference. Conclusion: In the case of instant cup noodles, we first set up the taste of chicken-based soup with high appreciation as a whole, a group that likes chicken-based soup taste and oil noodles for each market segment, a taste of beef based soup And popular group that likes raw noodles Appears that diversification is necessary, and it has been found that it is necessary to develop a product type by hierarchy and marketing with different size priority from group packaging container. In the case of Yuzu tea, it is indispensable to emphasize the efficacy, in particular, energy recovery preference appears high, appealing point matching the needs of energy recovery is necessary, release the citrus fruit as a product without buckwheat in Bisson Ho, the packaging container, The group that likes cups and sticks is different and we found that it is necessary to prepare all two types.

• 한국광학회지
• /
• 제33권6호
• /
• pp.260-266
• /
• 2022

2개의 결합층과 2개의 격자 층으로 구성된 회절격자 구조를 형성하고, 최적화 기법을 통하여 -1차에서 높은 투과 회절 효율을 가지는 회절격자를 설계하였다. 설계된 회절격자는 설계 중심파장에서 99.997%의 transverse electric wave 회절 효율을 가지고 있었으며, 95% 이상의 회절 효율을 유지하는 파장 폭이 80 nm이고 입사각 폭이 20.0°이었다. 회절격자 공차 분석을 수행하여 95% 이상의 회절 효율을 가지기 위한 두께 공차가 최소 60 nm 이상 확보되어 있고, 내부각도 10° 이내의 사다리꼴 모양에서도 회절 효율을 유지할 수 있음을 확인하였다.