• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.7
• /
• pp.484-490
• /
• 2018

This paper describes an algorithm for calculating load impedance by measuring voltage and current components using a VI sensor in a 13.56 MHz impedance automatic matching system. We propose an algorithm that improves the error rate by using an arbitrary complex calibration load instead of the conventional $50{\Omega}$ calibration load. The error rate is targeted to attain average values of $R_{IN}$ and $X_{IN}$ at 1% and 20% or less, respectively. First, the IF frequency is calculated using a mixer to reduce the error rate. Second, when the arbitrary complex load is used as the calibration load, the error rate $R_{IN}$ decreased from 4.7 % to 0.3 % on average, and $X_{IN}$ decreased from 102 % to 18.3 % on average.

• Journal of Communications and Networks
• /
• v.18 no.5
• /
• pp.837-845
• /
• 2016

Providing a customer with tailored location-based services (LBSs) is a fundamental problem. For location-estimation techniques with radio-based measurements, LBS applications are widely available for mobile devices (MDs), such as smartphones, enabling users to run multi-task applications. LBS information not only enables obtaining the current location of an MD but also provides real-time push-pull communication service. For indoor environments, localization technologies based on radio frequency (RF) pattern-matching approaches are accurate and commonly used. However, to survey radio information for pattern-matching approaches, a considerable amount of time and work is spent in indoor environments. Consequently, in order to reduce the system-deployment cost and computing complexity, this article proposes an indoor positioning approach, which involves using Asus Xtion to facilitate capturing RF signals during an offline site survey. The depth information obtained using Asus Xtion is utilized to estimate the locations and predict the received signal strength (RF information) at uncertain locations. The proposed approach effectively reduces not only the time and work costs but also the computing complexity involved in determining the orientation and RF during the online positioning phase by estimating the user's location by using a smartphone. The experimental results demonstrated that more than 78% of time was saved, and the number of samples acquired using the proposed method during the offline phase was twice as much as that acquired using the conventional method. For the online phase, the location estimates have error distances of less than 2.67 m. Therefore, the proposed approach is beneficial for use in various LBS applications.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.8
• /
• pp.511-517
• /
• 2016

Three-dimensional models of stenosis blood vessels were prepared using a 3D printer. The models included a straight pipe with axisymmetric stenosis and a pipe that was bent $10^{\circ}$ from the center of stenosis. A refractive index matching method was utilized to measure accurate velocity fields inside the 3D tubes. Three different pulsatile flows were generated and controlled by changing the rotational speed frequency of the peristaltic pump. Unsteady velocity fields were measured by a time-resolved particle image velocimetry method. Periodic shedding of vortices occurred and moves depended on the maximum velocity region. The sizes and the positions of the vortices and symmetry are influenced by mean Reynolds number and tube geometry. In the case of the bent pipe, a recirculation zone observed at the post-stenosis could explain the possibility of blood clot formation and blood clot adhesion in view of hemodynamics.

• Current Optics and Photonics
• /
• v.2 no.1
• /
• pp.90-95
• /
• 2018

Stimulated polariton scattering from the $B_1$-symmetry modes of a $KNbO_3$ crystal to generate a terahertz wave (THz-wave) with a noncollinear phase-matching scheme is investigated. The frequency-tuning characteristics of the THz-wave by varying the phase-matching angle and pump wavelength are analyzed. The expression for the effective parametric gain length under the noncollinear phase-matching condition is deduced. Parametric gain and absorption characteristics of the THz-wave in $KNbO_3$ are theoretically simulated. The characteristics of $KNbO_3$ for a terahertz parametric oscillator (TPO) are compared to those of $MgO:LiNbO_3$. The analysis indicates that $KNbO_3$ is an excellent optical crystal for a TPO, to enhance the THz-wave output.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.204-210
• /
• 2005

In this paper, we are proposed the antennas for RFID tag operated at UHF band which are inserted ground plane easy to mount the RFTD chips at the antenna surfaces. In order to implemented antenna for RFID tag which the size is same as conventional name card, the structure of the antenna is meander type, matching method for improvement characteristics of the antenna use T matching method, ground plane is inserted at the antenna substrate fer mounting RFID chips. The substrate size of implementation is $100\times60\;mm^2$ and the FR4 substrate is used. Results of the experiment, the center frequency of the implemented antenna is 427 MHz, -10 dB return loss bandwidth is 8 MHz, maximum return loss is 21 dB, the radiation pattern is omnidirectional. From these results, we are conformed application for UHF RFID tag antenna.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11C
• /
• pp.1029-1039
• /
• 2009

In this paper, the existing disparity aquisition algorithms were analyzed, on the bases of which a disparity generation technique that is superior in accuracy to the generation time was proposed. Basically it uses a pixel-by-pixel motion estimation technique. It has a merit of possibility of a high-speed operation. But the motion estimation technique has a disadvantage of lower accuracy because it depends on the similarity of the matching window regardless of the distribution characteristics of the texture in an image. Therefore, an enhanced technique to increase the accuracy of the disparity is required. This paper introduced a variable-sized window matching technique for this requirement. By the proposed technique, high accuracies could be obtained at the homogeneous regions and the object edges. A hardware to generate disparity image was designed, which was optimized to the processing speed so that a high throughput is possible. The hardware was designed by Verilog-HDL and synthesized using Hynix $0.35{\mu}m$ CMOS cell library. The designed hardware was operated stably at 120MHz using Cadence NC-VerilogTM and could process 15 frames per second at this clock frequency.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.4
• /
• pp.323-331
• /
• 1997

In this paper, the high efficiency balanced amplifier is presented as high efficiency power amplifier. This amplifier is basically composed of two FETs, an input power divider, output power combiner, input matching circuits, output matching circuits, second harmonic interconnection circuit and lowpass filter. The second harmonic interconnection circuit is composed of second harmonic frequency bandpass filter and transmission line. This circuit is inserted between the output terminals of the two FEF's output matching circuit, there is a second harmonic standing wave generated between two FET outputs. The electric wall termination is equivalent to the short circuit termination. As a result, the FET output termination condition needed to attain high efficiency is realized. Experimental high efficiency balanced amplifier is constructed to determine its practically attainable efficiency. The input VSWR is 1.27, and the output VSWR is 1.18. Power added efficiency of 75% is attained at 1.75 GHz band about 3W to balanced amplifier.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.12
• /
• pp.78-83
• /
• 2010

In this paper, a novel dual-band power amplifier using metamaterials has been realized with one RF GaN HEMT diffusion metal-oxide-semiconductor field effect transistor. The CRLH TL can lead to metamaterial transmission line with the dual-band tuning capability. The dual-band operation of the CRLH TL is achieved by the frequency offset and the nonlinear phase slope of the CRLH TL for the matching network of the power amplifier. We have managed only the second- and third-harmonics to obtain the high efficiency with the CRLH TL in dual-band. Also, the proposed power amplifier has been realized by using the harmonic control circuit for not only the output matching network, but also the input matching network for better efficiency. Two operating frequencies are chosen at 900 MHz and 2140 MHz in this work. The measured results show that the output power of 39.83 dBm and 35.17 dBm was obtained at 900 MHz and 2140 MHz, respectively. At this point, we have obtained the power-added efficiency (PAE) and IMD of 60.2 %, -23.17dBc and 67.3 %, -25.67dBc at two operation frequencies, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.7
• /
• pp.1429-1435
• /
• 2004

In this work, high performance broadband amplifier MMIC including all the matching and biasing components, and electrostatic discharge (ESD) protection circuit was developed for K/Ka band applications. Therefore, external biasing or matching components were not required for the operation of the MMIC. STO (SrTiO3) capacitors were employed to integrate the DC biasing components on the MMIC, and miniaturized LC parallel ESD protection circuit was integrated on MMIC, which increased ESD breakdown voltage from 10 to 300 V. A pre-matching technique and RC parallel circuit were used for the broadband design of the amplifier MMIC. The amplifier MMIC exhibited good RF performances and good stability in a wide frequency range. The chip size of the MMICs was $1.7{\pm}0.8$ mm2.

• Journal of dental hygiene science
• /
• v.20 no.1
• /
• pp.44-50
• /
• 2020

Background: Smartphones are a modern necessity. While they are convenient to use, smartphones also have side effects such as addiction. This study assessed the relationship between smartphone use, a part of everyday life in modern society, and oral health. Methods: An analysis was conducted using 2017 Korea Youth Risk Behavior Web-based Survey data. The propensity score estimation algorithm used logistic regression and 1:1 matching algorithm using nearest-neighbor matching. After matching, a total of 15,032 participants were classified into two groups containing 7,516 teenagers each who did and did not use smartphones, respectively. Results: Comparison of oral health behaviors according to smartphone use revealed a statistically significant difference in the frequency of tooth brushing per day, use of oral hygiene products, intake of foods harmful to oral health, and experience of oral health education (p<0.05). The factors affecting oral pain experience of adolescents were examined. Compared to male participants, female participants had an odds ratio of 1.627 for oral pain (p<0.05). According to the household income level, compared to the group with higher income, the group with lower income showed higher oral pain experience (p<0.05). Oral pain experience was 1.601 times more frequent among teenagers using smartphones (p<0.05). Conclusion: The results of this study indicated that use of smartphones by adolescents affected their oral health. These findings indicate the need for improved oral health management through the use of effective school oral health programs and individual counseling by oral health professionals, promotion of information dissemination through public media, and development of prevention strategies.