• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1036-1042
• /
• 2003

The hot embossing process has been mentioned as one of major nanoreplication techniques. This is due to its simple process, low cost, high replication fidelity and relatively high throughput. As the initial step of quantitating the embossing process , simple parametric study about embossing time have been carried out using high-resolution masters which patterned by the DRIE process and laser machining. Under the various embossing time, the viscous flow of thin PMMA films into microcavities during compression force has been investigated. Also, a study about simulating the viscous flow during embossing process has planned and continuum scale FDM analysis was applied on this simulation. With currently available test data and condition, simple FDM analysis using FLOW3D was made attempt to match simulation and experiment.

• Journal of KSNVE
• /
• v.6 no.6
• /
• pp.771-779
• /
• 1996

In this paper, double Fourier sine series is used as a modal displacement functions of a rectangular plate and applied to the free vibration analysis of a rectangular plate under various boundary conditions. The method of stationary potential energy is used to obtain the modal displacements of a plate. To enhance the flexibility of the double Fourier sine series, Lagrangian multipliers are utilized to match the geometric boundary conditions, and Stokes' transformation is used to handle the displacements that are not satisfied by the double Fourier sine series. The frequency parameters and mode shapes obtained by the present method are compared with those obtained by MSC/NASTRAN and other analysis.

• 연구논문집
• /
• s.26
• /
• pp.43-50
• /
• 1996

Present paper describes on/off design performance analysis of an 74KW industrial turboshaft gasturbine engine. Procedures to match between the compressor, combustor and turbine have been incorporated into the developed program satisfying compatibility requirement of flow and work and ratational speed. The validity of the performance results from the developed program are yet to be proved through performance experiments of the resultant engine, but comparison of the present results with those from "GASCAN(Thermoflow:America) under similar mass inlet flow, pressure ratio, and speed condition show good agreement despite present results underpredict 6-10% for power and up to 3% in efficiency, respectively.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.10a
• /
• pp.569-576
• /
• 2001

In this study a procedure for evaluation of performance point using direct displacement-based design method was developed to enhance the applicability of the method. Parametric study has been performed for the natural period of the structure, yield strength, and the stiffness after the first yield. The proposed method was also applied to a 10-story steel frame. To verify the accuracy of the result, the results from capacity spectrum analysis and time history analysis were compared. The results of the proposed method turned out to match well with the results of capacity spectrum method and the time history analysis.

• Proceedings of the KWS Conference
• /
• 2005.06a
• /
• pp.112-114
• /
• 2005

Direct nonlinear finite element analysis was carried out using nonlinear kinematic hardening model which was calibrated based on the experimentally determined material properties to obtain notch stress-strain state under cyclic load. By comparing numerical results and experimental data, conclusion was made on how well analysis results match physical phenomenon. Also, suggestion was made on what material curve should be used in conjunction with traditional Neuber/Glinka's rule to take into account the effect of material heterogeneity in its application to welded joint.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.2
• /
• pp.71-83
• /
• 2007

This study created a computerized information system of the collected job analysis data and analyzed the computerized job analysis data to derive critical job factors. Based on the ratings on each critical job factor, possible employment opportunities for the various types of disability could be derived according to the match between job condition and handicap condition. The results can be utilized by the Employment and Vocational Training Administration to expand both the counselor and counselee's perspectives about job possibilities and job requirements.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1033-1035
• /
• 2003

Linear induction motor with multilayer region of the single-sided is analyzed considering multi region traveling wave problem. A hybrid method of analysis consisting of field analysis in conjunction with the multilayer transfer matrix concept with adjustment of secondary iron permeability to match the tangential magnetizing field in each layer is developed.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.2
• /
• pp.207-214
• /
• 2006

The current paper focuses the analysis of leakage detection in water pipeline systems by means of the transient method. In order to obtain essential data for evaluation the existing methodology, an extensive experimental process has been carried out in a single pipeline system, Several experimental tests were performed with and without a leakage in the system. Using the unsteady friction and improved unsteady friction factors gives reasonable match between the computed and measured results on the condition of the flow situations presented in the paper. The transient method attempts to estimate the leakage in water pipelines using observed pressure data collected during transient events on the system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.103-108
• /
• 2013

This paper describes basic properties tests and non-rotating dynamic test for rotor blade, flexbeam, and torque tube of which bearingless rotor in helicopter consists. A basic properties test are bending and twist test to find the flap stiffness, lag stiffness, and twist stiffness of specimens. The purpose of dynamic test is to find natural frequencies and modes in non-rotating state. The test results are used to update the analysis model. The updated analysis results using rotorcraft comprehensive code match the tests quite well. The updated model input based on the tests will be utilized to analysis the conditions of rotating whirl tower test before the whirl test and will be compared with the whirl tower test results.

• Asia pacific journal of information systems
• /
• v.9 no.1
• /
• pp.17-38
• /
• 1999

While the value of information technology has long been a hot issue, few solid results have been found as of yet. It is partly due to methodological factors and model underspecifcation. This study empirically develops a ITS(information technology structure) taxonomy and investigates the relationships between ITS taxonomy and business performance in the Korean firms. Among factors that impact business performance, organization structure and control system are selected and they are hypothesized to moderate-the relationships between ITS taxonomy and business performance. By surveying 91 manufacturing firms and applying hierarchical cluster analysis, four ITS are identified : centralized, decentralized, centralized cooperative, decentralized cooperative. ANOVA, correlation analysis and crosstable analysis say the presence of moderating effect of organization structure and control system. Cooperative ITS is best in business performance. Centralized ITS is related to functional organizational form. Decentralized ITS is related to product organizational form with decentralized decision making, Centralized cooperative ITS is related to matrix organizational form. Decentralized cooperative ITS is related to matrix organizational form with high integration. These findings have implications for the opportunities and challenges to match information technology with organization structure and control system.